Russell Performance Products

09/04/2026

💧 Performance Hosing 101 💧

Choosing the right hose means matching its construction to the demands of your setup. Here’s how the Russell Performance ProClassic lineup stacks up:

🔹 ProClassic — Extruded CPE synthetic rubber with a nylon fiber braid for flexibility and abrasion resistance. Compatible with most fluids.

🔹 ProClassic II — Builds on ProClassic with a multi-wire stainless braid for added support and abrasion resistance.

🔹 ProClassic SS — Steps it up again with a 308 stainless steel outer braid for added heat resistance and durability, plus superior bonding to help eliminate fraying when the hose is cut.

From flexible and lightweight to added reinforcement and heat protection, there’s a ProClassic hose built for the job. 🔧

🔗 Find the right Russell Performance hose for your setup: https://bit.ly/4cnvDPe

08/28/2026

💧Route it Right. Seal it Tight.💧

A leak-free fuel system starts long before you turn the key. Proper fluid routing, quality connections, and the right fittings all play a role in keeping fuel where it belongs.

When plumbing your system:

🔹 Avoid sharp bends, kinks, and unnecessary routing that restricts flow.
🔹 Keep fuel lines away from exhaust and other major heat sources.
🔹 Support hoses properly to prevent rubbing, vibration, and abrasion.
🔹 Use the correct AN fittings and hose for the application.
🔹 Ensure fittings are properly seated and tightened without overtightening.
🔹 Inspect every connection for leaks before hitting the road or track.

Find the fittings, hose, and fuel-system components your build needs:
🔗 https://www.russellperformance.com

08/21/2026

💥 AN vs. NPT💥

They may both connect your plumbing, but they seal very differently.

AN fittings use a 37° flare to create the seal. NPT fittings use tapered pipe threads that tighten together to create the seal, typically with an appropriate thread sealant.

Quick rule: AN seals at the flare. NPT seals at the threads.

Knowing which one you are working with can save you from leaks, damaged fittings, and frustration. 💪🏼

08/14/2026

💥 AN Fittings 101 💥

Ever wondered what those numbers mean when someone says -6AN or -10AN?

Here's a quick and easy breakdown:

✅ AN= Army-Navy standard fittings
✅ The number represents the hose size in 1/16" increments
💧These fittings seal on a 37° flare
✅ Example:
🔵 -6AN = 6/16" (3/8")
🔵 -8AN = 8/16" (1/2")
🔵 -10AN = 10/16" (5/8")

AN fittings are designed to provide secure, leak-free connections for fuel, oil, coolant, and other fluid systems while giving your build that clean, professional look.

What AN size are you running on your current build? 👀

Shop this product: 🔗 https://bit.ly/3UbmUsX

08/11/2026

The pavement ends. The adventure begins. 🏔️

From technical rock crawls to muddy backroads and everything in between, off-road is more than a hobby; it's a lifestyle. No matter where your journey takes you, Edelbrock Group has the performance you need to tackle what's next.

6 Brands. 1 Passion. One relentless pursuit of performance. 🔥

Ready to build your next adventure? Explore our off-road lineup: https://bit.ly/4xlj52z

08/07/2026

Think all fuel pressure regulators do the same job? Think again. 👀

One of the most common causes of fueling issues isn't your pump, injectors, or carburetor; it's choosing the wrong fuel pressure regulator or installing it incorrectly. Whether you're running a carbureted setup or EFI, understanding the difference between bypass and non-bypass regulators can mean the difference between peak performance and chasing problems that never seem to go away.

In our latest EG Nation article, we break down:
✅ Bypass vs. non-bypass regulators
✅ Carbureted vs. EFI applications
✅ Common installation mistakes
✅ How to avoid fuel pressure headaches before they start

Read the full article and fuel your build with confidence. 👇
🔗

Though fuel pressure regulators come in all shapes, sizes, and finishes, knowing the differences helps you understand which one is right for your application.

08/07/2026

💥 Welcome to Under Pressure 💥

From fuel and brake lines to hose ends, adapters, and complete plumbing solutions, the behind-the-scenes details are what make a build reliable on the street and competitive at the track.

We will be sharing installation tips, education, FAQ's, and much more! Got a topic you would like to see covered? Drop it in the comments! 👇🏼

07/12/2026

The Red, White & Blue Promotion is winding down.
Get performance parts from six legendary brands trusted by enthusiasts everywhere.

From EFI systems and carburetors to camshafts, driveline components, ignition products, and more—your next upgrade is waiting.
- Select products proudly manufactured in the USA.
- Six Brands. One Passion.
SHOP NOW👉 https://bit.ly/3SuJtbo

07/09/2026

PERFORMANCE RUNS DEEP
From classic muscle cars and hot rods to modern street machines, Edelbrock Group brands have helped enthusiasts build faster, stronger, and more reliable vehicles for decades.
Celebrate the season with savings during our Red, White & Blue Promotion.
Featuring thousands of products across six trusted brands—including select products manufactured right here in the USA.
SHOP TODAY👉 https://bit.ly/3SuJtbo