RYDE Sidecar Racing Chassis

RYDE Sidecar Racing Chassis Manufacture of F1 & F2 Sidecar.

31/10/2026
When you need need a part the best way is to get stuck in and get it made. 💪 500 airbox now in its “green” stage of cure...
27/10/2026

When you need need a part the best way is to get stuck in and get it made. 💪

500 airbox now in its “green” stage of cure so over this week I’ll sand back and a light skim of filler then satin black it ready for the dyno run.

This will be fed by the 2 naca ducks each side

🛵💨💨💨💨💨💪🏁

For sale We are selling on behalf of Maria. Honda CBR600RR this has been Maria’s main race engine and this has only done...
25/10/2026

For sale

We are selling on behalf of Maria.

Honda CBR600RR this has been Maria’s main race engine and this has only done around 30 miles from a full fresh rebuild by MJW. This was to be used as the race engine at the TT26.

This is a TT spec engine but could be used in British F2 or Bemsee.

This engine has a billet sump, oil take off plate also oil pressure sensor fitted.

£3500 ono

Collection Derby.

Well 3 solid days fitting and making this fairing fit…. It wasn’t on this weekend schedule but it just turned to be 🤷‍♂️...
25/10/2026

Well 3 solid days fitting and making this fairing fit…. It wasn’t on this weekend schedule but it just turned to be 🤷‍♂️😂

Loads more to do but it’s a good start. I will prob end up using this fairing for next year due to mould and new faring costs. 🤷‍♂️

Now I’ve got this far I can look into an airbox because I need that before it goes for a dyno.

👀balls 🙄😂

🛵💨💨💨💨💨💪🏁

It’s that time of year…. ⏰💪🏁
24/10/2026

It’s that time of year…. ⏰💪🏁

One of today’s jobs was strip and rebuild with new seals all round ready for 2027. These pictures show how important it ...
22/10/2026

One of today’s jobs was strip and rebuild with new seals all round ready for 2027.

These pictures show how important it is to push your pistons out after each meeting to stop brake dust building up on the body and piston.
Brake dust build up stops the pistons returning after each push. This then makes your pads rub on the disc then heat build up
To then boil your brakes.

Really seals should be changed every year in a racing machine be it a sidecar or car or solo. Seals live in brake fluid 24/7 and in time they do go soft.

👍🏁

21/10/2026

What a bloody night 🤦‍♂️🤦‍♂️

Wired the gear position sensor to how it says on the label and how it’s been wired……

Would not work. Spent hours tonight looking at ECU settings to then check the plug on the sensor that it came with fitted….. and it’s been pined wrong 🤦‍♂️🤦‍♂️🤦‍♂️🤷‍♂️🤷‍♂️🤷‍♂️

Changed 2 pins and BINGO we have a signal
FFS. 😍😍😍

That’s the last bit of wiring I needed to sort out. 💪💪

For Sale  2 sets of used F2 tyres 1 set of slicks used but still good to go 1 set of used wets but very good Wets 6.5”, ...
21/10/2026

For Sale

2 sets of used F2 tyres

1 set of slicks used but still good to go
1 set of used wets but very good

Wets 6.5”, 6.5”, 9”
Slicks 7”, 7”, 10”

Must go together £700

Can post at extra cost.

Address

Derbyshire

Website

Alerts

Be the first to know and let us send you an email when RYDE Sidecar Racing Chassis posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share