10/21/2026
OK guys, I have another New Product to introduce tonight. Honestly, this isn't actually a "new" product, it's more like a reintroduction of a circuit I have sold before. But the older version didn't work as smoothly or as well as I wanted, so I took them off my website until I could dive into the math and get them working as they should work. They now work exactly as intended, and are smooth around the center positions (which was the problem with the old versions), so I'm ready to make the available again.
This is my Servo End Point Adjuster, it is available in two models, a Servo End Point Expander, and a Servo End Point Reducer. These do exactly what the names imply, they either increase (Expander) or decrease (Reducer) the servo end point coming from the radio. They are intended for situation where you may have two servos connected to the same receiver channel that need to have slightly different range of movement. Possible uses are gear door servos, flaps with multiple sections, etc. I have uploaded a video to YouTube that shows the Expander at work, I'll try to follow it with one for the Reducer, but if you watch one you'll get the idea of how they work.
Available on the website now at:
https://www.davesrce.com/product-page/servo-atv-end-points-reducer
YouTube video is here:
https://youtu.be/L3mbNizpDDY