Kruppenbacher Gunsmithing

06/06/2026

A little bit of stock work from over the years, a little bit of everything done for customers, Enjoy!

06/01/2026

05/29/2026

Cerakote refinish on a 22lr revolver, new grips fitted to it as well, this revolver had been through a fire had some pitting and smoke damage but overall no loss in heat treatment to any springs.

05/16/2026

H&r pioneer 22lr
parts gun re worked for a nice small rifle for a customers sons to shoot- 10” length of pull and the barrel cut to 16.5 inches front sight re mounted painted socom blue and graphite black and coyote tan stock

Before photos are in the end of the photo group check em out!

05/03/2026

Some before and aftet of a savage 755, quite heavily abused in the before pictures. The stock was quite beat up with some bad damage and nails holding a split together,and what I believe to be remnants of what was left of threads of a poly choke or similar that had gotten blown off at one point or another. All in all some stock dents were too deep to fully come out the barrel squared off and a new bead installed, wood refinished and metal blued.
So far they all may be badly used and poorly taken care of but with a little work,(maybe a little is not the whole truth but leave it at some work) they can be brought back to good shape again