https://www.facebook.com/101221174942080/

Outbound R/C

Directions

RC Rock Bouncer Custom Manufacturing and Racing

10/18/2026

Been busy since I been back home from KOTM Finals...

Torsion rod issue solved with much stronger rod

New chassis on the 4ws rig and took the front sway bar back out

Previous race chassis now on a "parts buggy" platform built from a donor rig and parts I had might tun into the bounty hill rig

Both buggys tested phenomenally today. Couple things to adjust on the new rig and some wear parts to replace on the 4ws rig. Going to head south for some racing in Arkansas in 3 weeks! Cant wait!

09/21/2026

2026 KOTM finals in the books! Yet again an awesome trip up to see the gang! David Roy and I hit some hills for practice on Thursday and had a blast. After the fiasco with the esc we were back on the hills Friday without issues. Snagged the fastest time on hill 1 but seemed to fall a bit behind from there. Hill 3 I launched up Ninja Please landed on my lid and couldnt get it back over. Looking over the buggy after the race I discovered I snapped my rear torsion rod on the sway bar at some point and overlooked it when checking the bolt tension between hills. Racing is racing and I couldnt be happier to end up on podium again! Thank you to Curtis Hazard for all you do and the whole KOTM gang! Onto 2027 we go!

09/18/2026

We were having too much fun yesterday on the hills to remember to pull the camera out often enough but I put together some of the clips we managed to get before I burned up my esc. What a day!

Thanks David Roy!

09/18/2026

Today's casualty was a bit different than expected. Mark that up as the 1st Monster I've ever burned up. 70 degrees outside and wasnt even on it that hard. Buggy just quit moving. Thankfully I found a replacement in stock and will be rtr as soon as I slap the tune back in it

09/17/2026

Getting that seat time up in NH with David Roy!

09/07/2026

Crazy how hot it still is here in KC. Temps pushing upper 90s makes it challenging to get in all the seat time before finals. This little shirt fan is key on days like these. Really helps get the buggy cooled back down fast so I can get back on the throttle. 9 days till the plane takes off! KOTM finals next weekend! Lets get it!!!

08/24/2026

You know what time it is! Less than a month out 2026 KOTM Finals! Beautiful weather yesterday turned out for a nice shakedown run. See yall soon! 🤘😎

07/20/2026

2026 race rig aka Hillbilly Deluxe is dialed! Need to get it back out on the hills and start prepping for KOTM finals soon but I figured Id give a little sneak peak of some shots I filmed a few weeks back. Less than 2 months out we'll be packing up the suticase again! Cant wait to see everyone!

04/26/2026

PROBUILTRC + ORC HELLBENT

1st off Id like to give a huge shoutout and a massive thanks to 1 of my drivers Mr David Roy. He surprised me with a bare built(unfinished) Hellbent Replica RC Chassis made by Probuiltrc in Italy when I arrived for finals last year for KOTM. Hollow tube chassis came with sway bar links scale engine seat etc. I converted it to fit a ryft skid(backwards) and finished the weld/grind/paint and made it all work on a ryft platform. Running castle 1415 2400kv and a mamba. 4ws treal axles since its just a trail buggy. Meus 2.2 cut swampers. We'll get some graphics soon as well

04/11/2026

Still need graphics but you knew it was coming. May I present "100 Shots Reloaded" built by Tim Cameron RC replica. Losi RZR rey skid cut in half and narrowed. Baja rey a arms flipped backwards to get the shock behind like the real buggy. Custom a arm mounts and rear link mounts. Ryft rear steer axle. 16.5" wheelbase 12.75" outside tire width front and rear. Im going to try and keep the front end together and just mess around on the hills from time to time. Cant wait to get this thing moving!

Address

Kansas City, KS

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Outbound R/C posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.