Cold Dead Hands Gunsmith

Cold Dead Hands Gunsmith Gunsmith services-Cleaning, Repairs, Installations, and upgrades on pistols rifles shotguns. Proud 2ND Amendment and freedom supporting American.

Fi****ms enthusiast and shooter. I support every ones right to keep and bear arms.

Built a lower receiver today. Palmetto State Armory has affordable products and I have never had an issue with them. F...
06/03/2026

Built a lower receiver today. Palmetto State Armory has affordable products and I have never had an issue with them. Followed AR specs and torqued the castle nut to 40 ft lbs. I'll throw on an upper and take it to the range for testing.

Took this old Wi******er in from a customer. It is missing the fire control system and I am looking to get parts to reb...
05/06/2026

Took this old Wi******er in from a customer. It is missing the fire control system and I am looking to get parts to rebuild it.

The Banish 9 on the G***k 19 gen 5 looks great. But while testing function I found an issue. The recoil spring assembly...
03/29/2026

The Banish 9 on the G***k 19 gen 5 looks great. But while testing function I found an issue. The recoil spring assembly hits the bottom of the suppressor attachment and will not cycle leaving the spent round in the chamber. Looking in to solutions to this issue.

Shooting with a suppressor is different. The suppressor is slightly taller than standard sights. Will probably add suppr...
03/22/2026

Shooting with a suppressor is different. The suppressor is slightly taller than standard sights. Will probably add suppressor height sights.

My official endorsement as an American Gunsmith Institute approved service center.
03/18/2026

My official endorsement as an American Gunsmith Institute approved service center.

This weekends project was installing this suppressor on the G***k
03/09/2026

This weekends project was installing this suppressor on the G***k

02/25/2026

More about the Strikeman Dry Fire system and why dry fire will not harm your center fire weapons.

02/15/2026

Check out the Strikeman Dry Fire system.

OSIGHT C Green Dot on the Springfield XDM Elite Compact. Tried to get a picture but the camera won't focus on the sight...
02/07/2026

OSIGHT C Green Dot on the Springfield XDM Elite Compact. Tried to get a picture but the camera won't focus on the sight picture. Already had an optics cut just needed to add a mounting plate. Will test it soon.

OSIGHT XR Red Dot on the G17 Gen 6. Comes optics ready with G***k mounting plates. Tried to get a sight picture but th...
02/07/2026

OSIGHT XR Red Dot on the G17 Gen 6. Comes optics ready with G***k mounting plates. Tried to get a sight picture but the camera wont focus on the sight picture. Going to test it soon. Put a mini OLIGHT on it also.

Address

234 Meadow Lane
Jefferson, GA
30549

Telephone

+17063625118

Website

Alerts

Be the first to know and let us send you an email when Cold Dead Hands Gunsmith posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category