10/28/2026
𝐍𝐨𝐭𝐞𝐬 𝐟𝐫𝐨𝐦 𝐭𝐡𝐞 𝐀𝐒𝐓𝐌 𝐅𝐚𝐥𝐥 𝐌𝐞𝐞𝐭𝐢𝐧𝐠𝐬 𝐟𝐨𝐫 𝐀𝐞𝐫𝐢𝐚𝐥 𝐀𝐝𝐯𝐞𝐧𝐭𝐮𝐫𝐞 𝐎𝐩𝐞𝐫𝐚𝐭𝐨𝐫𝐬
We just got back from the ASTM F24 Committee on Amusement Rides and Devices fall meetings out in Garden Grove, California, and our notebooks are full! While standards meetings can sometimes feel like a lot of dry, legal wordsmithing, the discussions happening in those rooms right now have huge, practical implications for how our courses are built, inspected, and operated.
For those of us running challenge courses, zip lines, and aerial adventure parks, what happens at ASTM matters. In states regulating aerial attractions under amusement device statutes, these standards serve as the baseline for legal compliance and inspector expectations.
Here are the biggest operational highlights from the fall meetings—and what they mean for the field as we head toward 2027:
𝟏. 𝐓𝐡𝐞 𝐀𝐒𝐓𝐌–𝐄𝐍 𝐀𝐥𝐢𝐠𝐧𝐦𝐞𝐧𝐭 𝐈𝐬 𝐏𝐨𝐰𝐞𝐫𝐢𝐧𝐠 𝐆𝐥𝐨𝐛𝐚𝐥 𝐈𝐒𝐎 𝐒𝐭𝐚𝐧𝐝𝐚𝐫𝐝𝐬
The ongoing harmonization between ASTM and European (EN) standards is not just an academic exercise. It represents the foundation of the incoming global ISO standards for the attractions and adventure sectors.
IAAPA is actively sponsoring and facilitating this harmonization work as a direct contributor to the international standards development process. Unlike organizations that serve merely as informal observers or advisory voices, IAAPA holds a formal seat at the negotiating table where language, technical requirements, and cross-border safety criteria are established.
This harmonization touches critical operational areas—restraints, accelerations, chain/cable specifications, and inspection criteria. If you want to see what is being proposed before it becomes standard of care, you can request draft standards and submit direct comments through IAAPA by emailing [email protected]. Having your feedback routed through an active contributor ensures our industry's practical realities are heard.
𝟐. 𝐓𝐡𝐞 𝐎𝐩𝐞𝐫𝐚𝐭𝐢𝐨𝐧𝐚𝐥 𝐁𝐥𝐢𝐧𝐝 𝐒𝐩𝐨𝐭: 𝐇𝐨𝐰 𝐃𝐨 𝐘𝐨𝐮 𝐀𝐜𝐭𝐮𝐚𝐥𝐥𝐲 𝐌𝐞𝐚𝐬𝐮𝐫𝐞 𝐖𝐢𝐧𝐝?
Standards routinely state maximum operating wind thresholds, but there remains a noticeable gap across the board when it comes to actionable guidance: When, where, and how are you measuring wind speed?
A handheld anemometer read from the ground rarely reflects canopy or ridge-line wind shears. Operations manuals, commissioning documents, and staff training across the industry need clear, actionable protocols on wind monitoring rather than leaving it to guesswork.
𝟑. 𝐓𝐲𝐢𝐧𝐠 𝐅𝟑𝟓𝟗𝟖 𝐑𝐢𝐬𝐤 𝐀𝐬𝐬𝐞𝐬𝐬𝐦𝐞𝐧𝐭𝐬 𝐃𝐢𝐫𝐞𝐜𝐭𝐥𝐲 𝐢𝐧𝐭𝐨 𝐅𝟐𝟗𝟓𝟗 𝐃𝐞𝐬𝐢𝐠𝐧
The conversation around ASTM F3598 (Risk Assessment) is expanding directly into ASTM F2959 (Aerial Adventure Courses). Task groups are looking at how designers should systematically evaluate site-specific aerial hazards within standard risk assessment frameworks. For operators and builders alike, now is the time to review your hazard identification documentation so design assumptions align with operational realities.
𝟒. 𝐃𝐞𝐟𝐢𝐧𝐢𝐧𝐠 𝐭𝐡𝐞 "𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐈𝐧𝐬𝐩𝐞𝐜𝐭𝐢𝐨𝐧" & 𝐒𝐜𝐨𝐩𝐞 𝐂𝐥𝐚𝐫𝐢𝐭𝐲
Within the F24.40 Operations and Maintenance Subcommittee, work is underway to establish a formal definition for "Structural Inspection."
Across the challenge course industry, inspection scopes can vary wildly from vendor to vendor. Operators should take a hard look at their inspection contracts: Does the written scope clearly define what percentage of components are inspected, how they are evaluated, and where visual checks end and non-destructive testing or engineering evaluations begin? Having a clear definition will protect both operators and inspectors.
𝟓. 𝐏𝐚𝐭𝐫𝐨𝐧-𝐃𝐢𝐫𝐞𝐜𝐭𝐞𝐝 𝐑𝐢𝐝𝐞𝐬 𝐚𝐧𝐝 𝐍𝐨𝐧-𝐁𝐞𝐥𝐚𝐲𝐞𝐝 𝐀𝐭𝐭𝐫𝐚𝐜𝐭𝐢𝐨𝐧𝐬
The Full Circle on Patron-Directed Rides: If this feels familiar, it's because it is! Back around 2012, early task group efforts began drafting standards for "Patron-Directed Amusement Rides," but the work was ultimately narrowed down to focus strictly on aerial adventure courses (which became F2959). Now, that broader concept is officially back on the table. A baseline, "bare-bones" standard for patron-directed rides is coming soon, and it will be worth watching closely to see how it influences or interacts with F2959 down the road.
𝐀𝐝𝐯𝐞𝐧𝐭𝐮𝐫𝐞 𝐂𝐡𝐚𝐥𝐥𝐞𝐧𝐠𝐞 𝐀𝐭𝐭𝐫𝐚𝐜𝐭𝐢𝐨𝐧𝐬: Standards development around non-belayed adventure elements has stalled recently, but efforts are underway to advance a streamlined, "stripped-down" version.
𝐍𝐞𝐭𝐭𝐢𝐧𝐠 𝐆𝐮𝐢𝐝𝐚𝐧𝐜𝐞: Expect to see a helpful non-mandatory appendix chart proposed soon to guide builders and operators in selecting appropriate netting materials based on application and load.
The next ASTM committee meeting heads to New Orleans in February 2027. In the meantime, taking a proactive look at your wind protocols, inspection scopes, and risk assessments will keep your operation ahead of the curve.