Carnivore Blades

Carnivore Blades Tools for your outdoor lifestyle

A semi skinner in 4mm CPM Cruwear steel. The blade is a full flat grind. The handle is a tapered tang with stabilised Sc...
12/05/2026

A semi skinner in 4mm CPM Cruwear steel. The blade is a full flat grind. The handle is a tapered tang with stabilised Scandinavian birch with blue G10 liners and stainless Loveless bolts & lanyard tube.

This is a hunter pattern knife that I sold at the Melbourne knife show this past weekend. The blade is Nitro V stainless...
03/05/2026

This is a hunter pattern knife that I sold at the Melbourne knife show this past weekend.

The blade is Nitro V stainless steel with a full flat grind. The handle material is Grip-X luminous scales with G10 liners, stainless Loveless bolts & lanyard tube.

This is a Nesmuk skinner pattern, but should be a pretty versatile blade. Steel is 3.5mm NitroV with a full flat grind. ...
23/03/2026

This is a Nesmuk skinner pattern, but should be a pretty versatile blade.

Steel is 3.5mm NitroV with a full flat grind. Handle is a tapered tang with stabilised gidgee, G10 liners and brass Loveless bolts & lanyard tube.

Handle material from Great White Handleworks
Steel from Gameco Artisan Supplies, Artistic Glass Supplies

Finished off a knife I started last year. Its the first one completed since moving all my knife making equipment at the ...
14/02/2026

Finished off a knife I started last year. Its the first one completed since moving all my knife making equipment at the end of 2025. This one is a chefs knife with a 200 mm blade, 50mm deep (at heal) and a euro style handle.

The steal is 2.5mm NitroV with a full flat grind which gives it a nice distal taper to a fine point. The handle is a tapered tang, stabilised & died birch wood, black G10 liners and nickel silver pins.

20/01/2026

Finished my new grinding room. Working on a new project in 80CRV2 steel.

Edit to add the video that somehow didnt load the first time

This is a knife I made for my wife using some of her favourite colours in the handles. The steel is 3mm Nitro V with a h...
05/12/2025

This is a knife I made for my wife using some of her favourite colours in the handles.

The steel is 3mm Nitro V with a hollow grind. The handle has a tapered tang, G10 handles with G10 liners and mosaic pins.

This is a different version of my standard hunter profile. It has a hollow high saber grind and a swedge on the spine to...
29/10/2025

This is a different version of my standard hunter profile. It has a hollow high saber grind and a swedge on the spine to thin down the tip.

The steel is 3mm Nitro V. The blade is 4 inches long and very slicey. The handle is a tapered tang with orange G10, orange and green G10 liners, stainless Loveless bolts and a stainless lanyard tube.

This is a knife my son profiled out some time ago. I cleaned up the bevels he ground, finished the metal work and fitted...
12/10/2025

This is a knife my son profiled out some time ago. I cleaned up the bevels he ground, finished the metal work and fitted the handle scales. I was going for an updated Green River skinner and I think it delivers on that.

Steel is SF100 stainless at about 2mm on the spine. The bevel is a full flat grind to a thin cutting edge. The handle material was sent to me by a friend labeled “probably blue gum”, with black G10 liners and copper Loveless bolts.

This knife is my version of a full tang Marbles Woodcraft. The steel is S35VN with a full flat grind and a swedge on the...
05/10/2025

This knife is my version of a full tang Marbles Woodcraft. The steel is S35VN with a full flat grind and a swedge on the spine. The tang is tapered to around a millimeter, with book matched gidgee scales, thin red liners and brass Loveless bolts and a brass lanyard tube.

This is a knife I recently finished for a customer. The steel is 3mm Nitro V with cryo treatment. The bevel is a high sa...
23/09/2025

This is a knife I recently finished for a customer. The steel is 3mm Nitro V with cryo treatment. The bevel is a high saber grind, and the edge is ground to 0.2mm to make it quite slicey. I would normally grind the profile to more of a spear point, but this has a bit more drop at point to help with game processing. The handle is a tapered tang with Micarta handles, black G10 liners, brass Loveless bolts and brass lanyard tubes. The liners are difficult to see in the pictures, but that was what the customer requested.

Address

Melbourne, VIC

Website

Alerts

Be the first to know and let us send you an email when Carnivore Blades posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Carnivore Blades:

Shortcuts

Featured

Share

Category