TaeguTec SA

07/05/2019

CHASEMILL Power

New 2PKT 05 and 07 High Feed Inserts Released

Taegutec has added the HF insert to the line in order to perform high feed machining. An additional advantage to the double-sided structure is that it solves frequent tool failure and screw issues, therefore enabling stable machining at high feed rates.

Features:
- New optimized HF insert added for high feed machining
- High positive double-sided insert ensures stability and excellent machinability
- Double-sided dovetail design ensures stable and strong fastening
- New line's 05 insert is compatible with the existing 90 degree holders (the 07 size holder requires modification)

For more information contact [email protected]

12/03/2019

Tool: 14D-F45XN W 18125-40R-09
Insert: XNHU 0906 ANTN-MM TT6080

Watch our video to view cutting conditions and workpiece material used.

For more information contact your sales representative or our sales manager Pierre Goosen @ 0113621500

12/03/2019

MILLING: Chase2Hepta

» 45° entry angle face mill available with 14 corner economical double sided inserts
» Ideal solution for rough machining on cast iron and steel
» Efficient and smooth machining credit to its positive cutting edge geometry that lowers
cutting loads during rough machining

For more information contact our Sales Manager Pierre Goosen @ 0716881295 or email [email protected]

18/02/2019

TaeguTec's high productivity head-exchangeable SPADERUSH line has been expanded to smaller diameter drill heads and holders.

The range of SPADERUSH head exchangeable drills has been extended with the introduction of 20.0-25.5 mm drill heads and 20.0-25.9 mm indexable drill holders as standard items. Therefore, the drill diameter range supplied to the SPADERUSH 3D and 5D holders is also expanded to 20.0-41.0 mm.

With this newly added expansion, the SPADERUSH family now provides the same high performance machining to a wider range of hole-making applications.

Features
» Unique quick change clamping system - no need to remove the insert screw from the holder when replacing the indexable drill head
» Two effective cutting edges for higher productivity
» Asymmetrical pocket design for error-proof mounting, high tolerance and excellent surface finish
» Higher productivity due to the unique screw clamp design which enhances rigidity
» Through-coolant hole system capable
» Drill diameter range: 20.0-41.0 mm
» Drilling depth (L/D): 3D, 5D
» Available as tailor made items

Do you need more information, contact us at 0113621500 or our Sales Manager - Pierre Goosen @ [email protected]

For more information on our SPADERUSH_D20.0-25.9 mm Head Exchangeable Drills for the SPADERUSH Line - email [email protected] or [email protected]

14/01/2019

Parting & Grooving - T-Burst

Tool used: TQHL 25-27
Insert: TQJ 27-3.00-0.20 TT9080
View video for speed and cutting conditions

14/01/2019

PARTING & GROOVING
T-Burst

Tool used: TTEL 2525-3
Insert used: TDJ 3 TT9080
View video to see speeds and cutting conditions

For more information contact us @ 0113621500

14/01/2019

PARTING & GROOVING
T-Burst
New high pressure coolant capable groove-turning and parting tools
» Excellent performance on difficult-to-cut materials such as titanium, inconel and
other heat resistant alloys
» Good chip breaking on exotic materials under low feed rate conditions
» Reduced cycle time and higher productivity due to increased cutting speeds and
higher feed rates
» Increased tool life even under normal coolant pressure
» T-BURST holders are capable of up to 340 bar coolant pressure

For more information contact Jacques@ 0837857743 or email [email protected]

10/10/2018

Milling: Duetball
Tool: 2F20-14-25-10
Insert: 2FB200-m TT9080
Watch video to see cutting conditions

For more information contact [email protected]

10/10/2018

MILLING: Duetball
An excellent choice for rough & semi-finish profile milling

» Dovetail mechanism clamping provides increased security and insert clamping
» High helix cutting edge for smooth milling
» Economical double sided insert
» One insert type for both internal and external pockets means improved economy and inventory control

For more information watch our next video post on duetball or contact [email protected]

01/10/2018

TURN-RUSH
Tool: HCLNL 3232 P1607
Insert: CNMX 160712 HB TT8125

Watch video for cutting conditions

01/10/2018

01/10/2018

TURNING : Turn-Rush
HB chip breaker
For semi heavy turning

» 3 dimensional geometry that is exchangeable with the ISO standard holder
» New hooked lever design increases clamping forces and enhances
insert seating stability to improve tool life
» Double-sided insert

For more information contact [email protected]