ADVbikes Forums

05/11/2024

We just came back from one week in Aruba. Yes, The Beach Boys& #039; Kokomo song comes to mind:The video definitely wasn& #039;t shot in Aruba. Aruba is mostly flat and is a desert that is covered in cactus. The island is small enough that we decided ...
Continue Reading: https://advbikes.com/threads/scootin-aruba.3304/.

05/11/2024

For years I was part of the majority by gearing down the travel rate, mostly for travel rate in 1st and 2nd gears. On the GasGas, the typical thing was to fit a 10t versus 11t front sprocket to go with the 42t rear (42/11=3.82 turns of the ...
Continue Reading: https://advbikes.com/threads/changing-travel-rate-vs-rpm-in-the-gears.3289/.

04/11/2024

Maybe many haven’t heard of this e mx bike but in short it is one of the (or the most) advanced e mx-bike so far. Pushing 80hp and over 900nm at rear wheel its a blast. https://starkfuture.com/products/stark-vargI tested the brand new one yesterday...
Continue Reading: https://advbikes.com/threads/stark-varg.3283/.

02/11/2024

I spied this in this years X-Trial Geneva: Bou& #039;s and Marcelli& #039;s Cotas without the usual clutch slave cylinder in the cover, and with a clutch slave cylinder on the left side.After few or no changes to base parts since 2005, it& #039;s the ...
Continue Reading: https://advbikes.com/threads/montesa-cota-finally-something-new-in-the-clutch.3278/.
?

02/11/2024

Into a 2023 Gear Up, I cannot get over how different they are!Wow! Is an understatement.Ordered and on the way-adjustable rider windscreen-passenger short windscreen-hack electrical panel-hitchHave about 200 miles on it now.Last Friday we were bummed...
Continue Reading: https://advbikes.com/threads/traded-14-ural-gear-up.3272/.
#�

02/11/2024

I recently bought an Arai Contour X after wanting to try an Arai for a long time. Wish I& #039;d bought one sooner!The now discontinued Scorpion T1200 model I& #039;ve used for a long time had an internal drop down sun visor that was handy, even though...
Continue Reading: https://advbikes.com/threads/cheap-transition-shield-review.3265/.
#(cheap

02/06/2024

HI. I need to raise the handle bar on a 2019 z400 . I am just wondering about the cables, hoses. Do I need to redo them? Think there will be enough room. Also, I need to get mirror risers. Will these work?

31/05/2024

For years I was part of the majority by gearing down the travel rate, mostly for travel rate in 1st and 2nd gears. On the GasGas, the typical thing was to fit a 10t versus 11t front sprocket to go with the 42t rear (42/11=3.82 turns of the countershaft to 1 turn of the wheel to 42/10=4.2).With the problems at Gas-Gas (axing the small-dealer

For years I was part of the majority by gearing down the travel rate, mostly for travel rate in 1st and 2nd gears. On the GasGas, the typical thing was to fit a 10t versus 11t front sprocket to go with the 42t rear (42/11=3.82 turns of the countershaft to 1 turn of the wheel to 42/10=4.2)...

28/05/2024

Maybe many haven’t heard of this e mx bike but in short it is one of the (or the most) advanced e mx-bike so far. Pushing 80hp and over 900nm at rear wheel its a blast. https://starkfuture.com/products/stark-vargI tested the brand new one yesterday for a short 10 min ride, i was able to use maybe 5% of its potential.. thats the future believe it

Maybe many haven’t heard of this e mx bike but in short it is one of the (or the most) advanced e mx-bike so far. Pushing 80hp and over 900nm at rear wheel its a blast. https://starkfuture.com/products/stark-varg I tested the brand new one yesterday for a short 10 min ride, i was able to...

20/05/2024

I spied this in this years X-Trial Geneva: Bou's and Marcelli's Cotas without the usual clutch slave cylinder in the cover, and with a clutch slave cylinder on the left side.After few or no changes to base parts since 2005, it's the most significant engine change in 19 years! Or I might have just missed this detail for years on the rare Factory
?

I spied this in this years X-Trial Geneva: Bou's and Marcelli's Cotas without the usual clutch slave cylinder in the cover, and with a clutch slave cylinder on the left side. After few or no changes to base parts since 2005, it's the most significant engine change in 19 years! Or I might have...