Taylor Saddlery

  • Home
  • Taylor Saddlery

Taylor Saddlery Customized leatherwork and equipment restoration

Artisan equestrian equipment and coaching.

11/06/2026
Order going into DP soon! Most likely for a few Christ pads. Let me know if you are interested in something. I am very t...
11/06/2026

Order going into DP soon! Most likely for a few Christ pads. Let me know if you are interested in something.

I am very tempted to bring in a Comfort English model which can be rigged more english or western. It is a treeless saddle with several very cool features. For me personally, normal english saddles are too hard on my back injury so the cantle being a touch more "western" in design is a perfect hybrid. The fork adjusts with a key and the panels are removable to exchange thickness. Thoughts?

10/06/2026

Does anyone have a "dragon"? The kind that doesn't require a permit? This collar may be for you! 🐕🐉

The video doesn't do it justice. The padding is metallic blood red, pearlescent painted scales which take the light. Perfect for the canine in your life who means business.

Made with premium harness leather.

The hardware is repurposed off of old horse harness giving it a 🔥breath🔥 of new life.

Sneak peak at some Pet Expo finds 👀

This is what happens when you put a needle in your machine slightly too small for the thread. The difference in needle s...
09/06/2026

This is what happens when you put a needle in your machine slightly too small for the thread. The difference in needle size is hard to tell with the naked eye so you can easily grab the wrong one.

The long groove on a sewing machine needle runs down the front of the shaft toward the eye. It acts as a protective cradle for the thread as the needle repeatedly punches through fabric, significantly reducing friction, preventing the thread from shredding, and ensuring even tension. Needle that is a fraction too small can make it easier for the thread to not nest in the needle and jump out like this.

So how do you fix this?

Option 1) The correct answer is if you can, remove the entire line and retrace the holes again.

Option 2) Sometimes this can't work especially if you have thickness and material changes in that stitch line. Once you remove it, you will never truly be able to align the holes again in the padding. You can seam rip this loop, pull out the threads on either side enough to just thread a needle and then finish both sides, creating a gap... In that gap you can hand sew between and it's almost always invisible.

Best is to notice it before you continue the entire line so you aren't making more holes to retrace than necessary.

We will be there 🤗
09/06/2026

We will be there 🤗

Tedious stages of making anything leather padded.These will be going on dog collars for the Pet Expo!
08/06/2026

Tedious stages of making anything leather padded.
These will be going on dog collars for the Pet Expo!

As much as I love letting my rabbits be full chaos in the shop sometimes when Im working with sharp things I have to put...
08/06/2026

As much as I love letting my rabbits be full chaos in the shop sometimes when Im working with sharp things I have to put them back behind a barrier because they want to be my slippers the entire time and trip me...Dropping a knife on them would make that reality so it's barrier for safety.

Buns with his little paw trying to reach me making himself look pathetic 🙄

Hello everyone! 👋🐴I’d like to introduce myself and share a little about my riding journey since we have a lot of new fol...
08/06/2026

Hello everyone! 👋🐴

I’d like to introduce myself and share a little about my riding journey since we have a lot of new followers.

I realize many know me for leatherwork now because I have (semi) retired from coaching. I am a leatherworker as a by product but I am an equestrian first.

My passion for horses has taken me across several countries and disciplines over the years. I have had the privilege of training and coaching in Canada, Germany, Switzerland, and Spain, gaining experience with riders and horses of all levels.

My background includes classical dressage training in Spain, where I also became a Centered Riding Instructor. I have always valued the connection between horse and rider, focusing on balance, feel, communication, and developing willing, confident partnerships.

In Canada, I competed at the national level in Western Riding Championships with Appaloosas, which gave me a strong foundation in precision, horsemanship, and performance. Combining both classical and western traditions has shaped my approach to teaching and training, allowing me to draw from a wide range of experiences and techniques.

Today, I continue to enjoy helping riders build confidence, improve their skills, and deepen their understanding of their horses. I believe learning never stops, and every horse has something to teach us.

I'm looking forward to connecting with fellow horse lovers, sharing knowledge, and learning from this wonderful community.

Please feel free to introduce yourself and tell me a little about your horses and riding adventures!
🐎✨

07/06/2026

The Great Saddle Slip Mystery🔍

Your saddle slips to the left.

So naturally, you buy a new girth.

It still slips.🤨

So you buy a fancy anatomical girth, a non-slip saddle pad, and perhaps a breastplate with enough straps to secure a small aircraft.

It still slips.😠

So you call a saddle fitter.

Then another saddle fitter.

Then one recommended by a friend who swears they transformed her horse's life.

It still slips.😖

At this point, many horse owners begin to suspect that they're somehow destined to spend the rest of their life searching for the mythical saddle setup that stays exactly where it should.

But before you spend another dollar on tack or lose respect for your latest saddle-fitter, let me tell you about some fascinating research by Line Greve and Sue Dyson.🤓

Because what they discovered put some very important information on the table to consider when you have a saddle slip issue.

The researchers investigated horses with persistent saddle slip and found that many of them had underlying hindlimb lameness.

Now, stay with me if you just rolled your eyes and think this isn't you case because your horse is clearly NOT lame....

The type of lameness identified was not the obvious kind where the horse is hopping around on three legs.

The subtle kind.🤔

The sort of issue that can quietly affect performance, behaviour, balance, and movement long before anyone recognises it as a soundness problem.

Why?

Because horses with discomfort or dysfunction or weakness in a hind leg often alter the way they move. They redistribute load, change how they push off the ground, and compensate through their body. Those altered forces travel through the horse's back and can gradually push the saddle off centre.

This doesn't just apply to horses with obvious injuries. It can occur in horses with mild lameness, asymmetries, weakness, developmental immaturity, or conditions affecting structures such as the stifle, sacroiliac region, suspensory apparatus, or other parts of the hind limb.

Now here's the part that many people find surprising.

The researchers found that saddle slip was actually associated with well-balanced saddles that had even contact and good flocking.😲

In other words, a saddle that slips isn't necessarily poorly fitted.

In fact, if you've had the saddle checked, adjusted, reflocked, replaced, and the problem keeps returning, there may be something else worth investigating.

The most compelling finding came when the researchers identified the source of the hindlimb pain and used diagnostic nerve blocks to remove the discomfort.

The saddle slip disappeared in 97% of cases.😱

Read that again.

Ninety-seven percent.😱

The saddle didn't change.

The girth didn't change.

The saddle pad didn't change.

The horse's movement changed.🤯

That's a pretty powerful clue.😎

One of the biggest challenges with horses is that we often focus on the symptom we can see rather than the cause we can't.

The slipping saddle becomes the problem.

The canter transition becomes the problem.

The spooky behaviour becomes the problem.

The horse drifting through the shoulder becomes the problem.

But sometimes these things are not separate problems at all.

Sometimes they are all clues pointing towards the same underlying issue.

So if your saddle consistently slips despite multiple fitting assessments and equipment changes, it may be worth considering whether your horse is trying to tell you something.

And if that saddle slip is accompanied by things like:
- Canter difficulties
- Resistance under saddle
- Reactive or spooky behaviour
- Struggles with engagement
then the possibility of an underlying soundness issue becomes even more important to investigate.⚠️

One of the most valuable lessons I've learned working with horses is that behaviour, performance, and movement are often connected in ways that aren't immediately obvious.

A slipping saddle may not always indicate a soundness issue...sometimes it can be a YOU issue, but that is for another article another day.

But if it keeps happening despite your best efforts to fix it, it might be worth looking beyond the saddle.💡

Sometimes the saddle is not the problem.

It's the clue.

References
Greve, L., & Dyson, S. J. (2013). An Investigation of the Relationship Between Hindlimb Lameness and Saddle Slip. Equine Veterinary Journal, 45(5), 570-577.
Greve, L., & Dyson, S. J. (2014). The Interrelationship of Lameness, Saddle Slip and Back Shape in the General Sports Horse Population. Equine Veterinary Journal, 46(6), 687-694.

Collectable Advice 226/365. Please SHARE or hit SAVE. Please no copy and pasting.

Address


Telephone

+19023001194

Website

Alerts

Be the first to know and let us send you an email when Taylor Saddlery posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Taylor Saddlery:

  • Want your business to be the top-listed Gym/sports Facility?

Share