09/06/2026
As a follow up to yesterday‘s post about quality gear service, after my initial post, one of the divers during the charter had a catastrophic failure on their primary second stage when the front cover came off while at 30 feet of depth. She and her dive buddy executed a shared air ascent perfectly. Included in this post is a photo of the regulator.
During this morning‘s dive, two divers came out with scuba pro equipment incorrectly configured from the shop. Hoses were not securely tightened down to the first stage, and the primary second stage was connected to the top of the MK 25. The new divers thought something looked unusual, but did not know any different because of their new experience in the sport. This is another example of the poor quality of service coming out of a local dive shop. In this case, these regulators came from the same dive shop that serviced ScubaPro primary second stage that was blowing air after leaving the service techs bench, proving that it had never been tested.
At a time when the scuba industry is facing challenges of growth, examples like this blemish the scuba industry.
When you want your service done right on your primary life, sustaining equipment, I will repeat what I said yesterday. Contact Rob Hancock at https://scubagearservice.com
Dive safely and often.
Lake Travis Scuba
Our Business IsTaking A Dive!