Steady Custom Cycles

Call Directions Website Contact the business

Steady Custom Cycles All Steady Custom Cycle products are made in-house at our El Monte headquarter. True American built quality motorcycle parts.

Steady Custom Cycles is established today to offer the highest quality American made motorcycle products in the industry. For over 20 years, the founders of SCC has been cutting, bending, forming, and welding metal into the perfect figure that one could proudly purchase and install onto their beloved motorcycle. We run what we produce; from custom one off designs to full production products, all of our processes have been tried and true. You’ll find original designs and craftsmanship that will definitely set your prized possession apart from others. SCC welcomes all challenges that you have in mind. If you don’t see what you need, feel free to contact us for consultation on your custom project.

Check out this eventHead out there August 1st, it’s for a good cause
07/30/2026

Check out this event

Head out there August 1st, it’s for a good cause

06/20/2026

MADE IN USA

Due to increase of orders our lead time has extended to 6 weeks lead time starting next week on Monday. Please know that...
05/22/2026

Due to increase of orders our lead time has extended to 6 weeks lead time starting next week on Monday. Please know that pending orders that were already delayed are holding priority to complete over new orders.

Absolutely no rush orders.

Please remember that we build custom parts. Built to order. Our entire inventory has sold out and we were unable to celebrate due to the high demand for parts.
We’re attempting to build inventory and it’s selling out as it’s being build.

Patience is key for quality. Rushing through orders causes mistakes and affects the quality of the product.
If you would like to have our products please feel free to call and order or order online but please be patient.

Thank you so much for those who have helped us through all this and thank you to those who promote us and help us out. We truly appreciate all of you and we hope to celebrate the sold out inventory when we have a bit more free time. Thank you everyone who follows us and the people we support.

05/09/2026

MADE IN USA.

02/05/2026

This is a reminder because people tend to not do clearance checks before buying parts.

Please know that our extended bag rails are not compatible with fenders that have these extended fillers attached to it because those fillers block the area where the rails are supposed to be bolted on to.

If you still want to use our rails even though you have this type of fender, then it is possible to install only if you modify your fender to allow clearance for the rails to bolt on. For modifications like this we advise you to take the bike to a shop to be installed by professionals so that they can make the modifications to the fender for you.
The last photo shows the best clearance for installing the rails.
If you have any questions
call our office: (626) 522-1264

New Beach Bars are listed on our website!Go to www.steadycustomcycles.com to checkout the new beach bars and have a look...
01/22/2026

New Beach Bars are listed on our website!

Go to www.steadycustomcycles.com
to checkout the new beach bars and have a look around at our stuff. It’s a guarantee that you’ll find something parts that you don’t see anywhere else.
All our Handlebars, Engine Guards, Rear Guards, Rails, pipes and exhaust tips are made in the USA.

Please know lead time for parts that aren’t in stock is approximately 3 weeks.

Call our office to check for availability (626)522-1264
At 8am - 3pm Monday - Friday Pacific time zone

Walk in clients are welcome but please ring the doorbell and be patient, someone will come to the door to assist you.

12/30/2025

Thank you for the video!
The bike looks amazing 🤩
Thank you for your patience, we’ll be shipping your chrome clamps out soon.

The pipes have baffles installed inside,
Length 36” total from end to end.
Chrome brackets are heavy duty.
Softail Mounting kit is needed for installation. If you notice one pipe is sticking out more that the other side then remove the 2 spacers that connect the mounting brackets to the pipes only on the pipe that is sticking out more. This should even out the pipes.

Notice to all clients:
Our pipes and beefy brackets are compatible with most headers but please be sure to order the pipes and mounting brackets at the same time or else you might not receive the correct fitment. If you already have our chrome or black brackets please let us know when ordering pipes so that we can make sure to ship out the correct fitment.

12/15/2025

Thank you to club in Florida for all your support!

Old School Handlebar
Tradition Rear Guards for Softail
Old School Rear Guards
Double Barrel Pipes
Tradition Handlebar
Tradition Engine Guard
Extended Bag Guards and Rails
Straight Pipes
Batique Pipes

12/04/2025

New California Beach Bar is available for purchase!
We should have videos and photos soon!

The beach bars are 42” wide, with a 1.5” rise, 1.5” all the way through, perfect for running the cables and wires on the inside to achieve that sleek clean look, these beach bars will allow you to get that low look, available in chrome and gloss black.

Follow to see the bars in action

Address

9705 Klingerman Street
South El Monte, CA
91733

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+16265221264

Website

Alerts

Be the first to know and let us send you an email when Steady Custom Cycles posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Steady Custom Cycles:

Shortcuts

Share