Wire EDM Services

04/24/2025

We just finished up this tiny and precise job for a customer and we wanted to show just how small of a job it was.

First picture is the piece of material that was provided to us to cut out the needed tabs. This material size is 4”L x 2”W and .028” thick.

Second & third picture is the finished job with the “tabs” cut into the material. We punched a few out just so you can see the size of them.
These tabs were either 3.3mm x 2.4mm or 2.8mm x 1.1mm
That is a very small paper clip for size comparison.

This is precision work at its finest right here! Reach out to us for any of your Wire EDM needs and we would be happy to work with you.

10/28/2024

Wire EDM Services is Hiring! We are looking for an experienced Wire EDM Operator or someone who has machining experience and is willing to learn and expand their knowledge. Please reach out to us if you are interested.

864-757-9955

[email protected]

05/30/2024

We had another eventful day at Wire EDM Services. Last December, we got our first AgieCharmilles CUT F 600 EDM Machine from GF Machining Solutions USA(the FIRST one in the Southeast) and we decided we wanted to buy two more. We are in the process of eliminating some of our older machines (ones that we have used for 18 years). Out with the old and in with the new!

As you can see in the pictures, it was a very tight fit for these machines to go through the opening down to our EDM room so it was nerve wrecking for sure. We are scheduled to get these two up and running next week!

Big thanks to with RayTech Machine Tools, Inc for being the absolute BEST salesman there is! He is your go-to for anything EDM, machining, tooling, CMM.

Huge shoutout to Pro-Pac International, An MEI Company for the amazing Rigging service. These guys are always top notch and very professional. Definitely give them a shout for any of your Rigging needs!

12/20/2023

Today has been an exciting and eventful day at Wire EDM Services. We are starting to slowly replace some of the older machines with some brand new ones!

Today we got in our GF Machining Solutions USA AgieCharmilles CUT F 600, fresh off the ship from Switzerland. This machine is so new that we received the very FIRST one in the whole Southeast! We are scheduled to get this up and running next week.

From everyone here at Wire EDM Services, we hope you have a Merry Christmas and Happy New Year!

12/20/2022

Small precise job we did out of copper for a customer. Started out blank, we drilled the .013” starter holes, and then burned the slots.

For any of your Wire EDM needs, come see us. We have the best prices and quickest turn around time in the Upstate of SC! Quality and Precision is our specialty!

05/20/2022

Tiny job that was done for a customer today. Look how small compared to that dime!

For any of your Wire EDM needs, come see us. We have the best prices and quickest turn around time in the Upstate of SC!

07/09/2020

Time to lean is time to clean.

06/18/2020

Wire EDM Services is a full service wire EDM shop that will suit your needs whether you need a job shop service or production work.

09/27/2016

Not my video just thought it was a neat one.

https://youtu.be/iptAkpqjtMQ

We design, produce and inspect over a million Formula One car parts a year. This is the story of a humble front suspension bolt... RB12-FS-00663-02. We follo...

04/08/2016

Before and after of the part made in the video.

04/07/2016

Wire EDM in action
https://vimeo.com/161869279

This is "Untitled" by on Vimeo, the home for high quality videos and the people who love them.

03/20/2016