Young's Gunsmithing

Young's Gunsmithing Block rifle specialist, gun builder, custom machinist. We are small shop with big capability located in Sand Coulee, MT. Give us a call for details.

We specialize in everything from a 20 caliber custom varmint rifle to hard-hitting big bore ultra long range rifles; particularly our block rifles. They offer the ultimate in consistency even with drastic changes in environmental conditions. This is of the utmost importance when shooting at extended ranges. Over the years, we've refined our block rifles to accommodate numerous rifle actions, barre

l contours and stocks. Chances are, if you have an old Mossberg rifle in your closet, we can enhance it into a viable ultra long range rifle that exceeds your expectations.

Some fitting of a 5-screw (or 10-screw if you're from the south 🤣) block into a chassis. Previously, we've only fitted ...
06/28/2023

Some fitting of a 5-screw (or 10-screw if you're from the south 🤣) block into a chassis. Previously, we've only fitted these into composite stocks.

A 300 Norma AXMC with a 27" HV Brux, 8.5-twist barrel. It's shooting the 250 A-tips very well with Retumbo and Lapua bra...
05/23/2022

A 300 Norma AXMC with a 27" HV Brux, 8.5-twist barrel. It's shooting the 250 A-tips very well with Retumbo and Lapua brass for some preliminary 110 yard testing. The Elite Iron Revolution Bipod is nice touch.



A PRS type build for a youth shooter using an ARC Nucleus and a Bartlein in 223. It's got the short LOP butt from MPA. ...
04/23/2022

A PRS type build for a youth shooter using an ARC Nucleus and a Bartlein in 223.
It's got the short LOP butt from MPA.



If you are in need of a large tennon Accuracy International Prefit with a not-so-common chamber, look us up! ...
04/19/2022

If you are in need of a large tennon Accuracy International Prefit with a not-so-common chamber, look us up!

A new 6.5-06 40 degree Ackley Reamer was used on a higher mileage 6.5 barrel we had taking up space. We screwed it onto...
08/26/2020

A new 6.5-06 40 degree Ackley Reamer was used on a higher mileage 6.5 barrel we had taking up space. We screwed it onto a trued up 1960s Model 700 and dropped it a T4A Manners without any bedding. It still shoots sub MOA with 140 class bullets. Got about 150 rounds formed....only 450 to go on Peterson Cartridge Co new 30-06 based brass.

Manners Composite Stocks

The first 33XC block rifle. It’s got a 9-twist Lilja in a block rifle contour. Initial testing with the 300 grain OTM i...
07/23/2020

The first 33XC block rifle. It’s got a 9-twist Lilja in a block rifle contour. Initial testing with the 300 grain OTM indicates 1/4 MOA potential.

Here is a 300 Norma Magnum built on a Defiance Rebel with 0.750” bolt and integral recoil lug. The bolt was nitrided. Ot...
03/23/2020

Here is a 300 Norma Magnum built on a Defiance Rebel with 0.750” bolt and integral recoil lug. The bolt was nitrided. Other details:

- Brux 1.350”, 9-twist barrel at 28”
- Manners T4FA with full pillar bedding
- Hawkins CIP length DBM
- Elite Iron Bravo SD suppressor
- All Metal Cerakoted Flat Dark Earth
- Area 419 Arca rail added to the stock

The owner sent these pics during barrel break in. The 230 SMK is showing promise with RL33 at just over 2900 fps currently.

A long-time customer had me assemble this out of used parts for a long range deer rifle as a gift for his buddy. Trued u...
10/22/2019

A long-time customer had me assemble this out of used parts for a long range deer rifle as a gift for his buddy.

Trued up Rem 700 Short Action with a 0.250” PTG recoil lug

Used “Mystery” 6.5 8-twist barrel. Previously chambered in 6.5x47. Bore scoped and looked great (guessing it’s a Lilja Barrel), so it was recut to 6.5 Creedmoor for factory ammo availability. 27” finish

Used MPA BA Lite Chassis

Metal Cerakoted Tungsten

Talley rings and a Bushnell 3-12x44 LRHS (used)

Weighs 12.3 # with bipod and a full magazine

Factory trigger

Five shots using Hornady Brass and 140 ELD-Ms with IMR 4451 at just under 2800 fps.

Whatever barrel is on there seems to be of reasonable quality.

This is a 30-338 Lapua Improved built on heavily modified, single shot Rem 700. It has been bedded into a Manners EH1A. ...
09/26/2019

This is a 30-338 Lapua Improved built on heavily modified, single shot Rem 700. It has been bedded into a Manners EH1A. The barrel is a Rem Sendero Contour Bartlein at 28”. The 215 Berger is shooting well at 3183 fps with single digit SDs.

Address

25 Louise Avenue
Sand Coulee, MT
59472

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

+14067365367

Website

Alerts

Be the first to know and let us send you an email when Young's Gunsmithing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Young's Gunsmithing:

Shortcuts

Share

Category