Airsoft Tech Services-Maryland

Airsoft Tech Services-Maryland Providing airsoft maintenance, repair, and upgrade services. Specializing in AEGs, GBBs, and HPA. We can also help find parts.

Perun MOSFET and Perun Speeder trigger install, as well as tune up for this ICS MK18.
05/31/2026

Perun MOSFET and Perun Speeder trigger install, as well as tune up for this ICS MK18.

Real Sword Type 97 HPA conversion in for troubleshooting
05/10/2026

Real Sword Type 97 HPA conversion in for troubleshooting

Work on the airsoft HPA LCT RPD is ongoing. Added a Bullcraft Industries short barrel and railed top cover. It is much m...
02/22/2026

Work on the airsoft HPA LCT RPD is ongoing. Added a Bullcraft Industries short barrel and railed top cover. It is much more handy now. :D

LCT RPD in for HPA conversion.
02/15/2026

LCT RPD in for HPA conversion.

PolarStar Kythera install and trigger tuning for this VFC MCX.
01/16/2026

PolarStar Kythera install and trigger tuning for this VFC MCX.

WE 416 GBBR in for a broken nozzle and leaking mag. The nozzle and the magazine valve o-rings were replaced with parts o...
10/10/2025

WE 416 GBBR in for a broken nozzle and leaking mag. The nozzle and the magazine valve o-rings were replaced with parts on hand. Back up and running in time for the weekend.

WE AK-74 with HPA adapter in for lightstrikes/dead trigger.These share receivers with the AKS-74u model that has a pre-i...
09/24/2025

WE AK-74 with HPA adapter in for lightstrikes/dead trigger.

These share receivers with the AKS-74u model that has a pre-installed magwell flare. The receiver on this AK-74 was warped from having the screws for the AKS-74U magwell flare installed and torqued improperly on the trigger guard.

You can see the two shorter screws that were installed on the trigger guard along with the two longer screws. They all should have been short screws or spacers installed on the long screws.

The receiver was re-formed, proper screws installed, and the HPA adapter was fitted. No more lightstrikes/dead trigger. :)

MCX GBBR in for spilling gas. A quick disassembly of the bolt was completed within 10 minutes of drop off. The issue was...
08/17/2025

MCX GBBR in for spilling gas. A quick disassembly of the bolt was completed within 10 minutes of drop off. The issue was identified as a broken nozzle o-ring and replaced. Less than one day turnaround.

Bolt/Daniel Defense MK18 in for a rebuild and wiring repair.
08/01/2025

Bolt/Daniel Defense MK18 in for a rebuild and wiring repair.

VFC Sig MCX Virtus in for upgrades. MOSFET, gears, inner barrel, and hop-up setup.
05/17/2025

VFC Sig MCX Virtus in for upgrades. MOSFET, gears, inner barrel, and hop-up setup.

Address

Odenton, MD

Website

Alerts

Be the first to know and let us send you an email when Airsoft Tech Services-Maryland posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category