DTP Customs RC

DTP Customs RC A fun site for the DTP Customs Crawling Crew to post and share.

When gets cancelled, you make your own. The first annual “DTP Crawlfest”. :)
07/25/2020

When gets cancelled, you make your own. The first annual “DTP Crawlfest”. :)

AX10 body cut to match the articulation. This has been such a fun project car and such an insane ! Very happy with th...
09/24/2019

AX10 body cut to match the articulation. This has been such a fun project car and such an insane ! Very happy with the final results and Mike White. Equipped with , , Bilstein Shocks, powered by a WP1080 @ Rocklin, California

09/11/2019

First time I’ve taken the out since I put on the new axles... The crawl went ‘good’ until I got stuck. :( I have never had trouble like this, it looks like the spur gear is too lose but why? I haven’t touched the transmission or spur gear yet... I checked the axles before connecting the shafts and they seems to spin just fine. Thoughts?

The last shots of the rebuilt with the new axles, a rebuilt triple 4 (highly recommend), lockouts/c hubs/knuckles, ...
09/10/2019

The last shots of the rebuilt with the new axles, a rebuilt triple 4 (highly recommend), lockouts/c hubs/knuckles, shocks, and a WP1080 at the core!!! Sure, it’s a bit of a “hodgepodge or parts” but I stretched the budget and made it work. :) @ Rocklin, California

Ok, definitely a labor of love. Had to do a fair amount of grinding and some small mods to get the c hubs (from my gen...
09/10/2019

Ok, definitely a labor of love. Had to do a fair amount of grinding and some small mods to get the c hubs (from my gen1 SCX10) to fit on the axle housing. I know you shouldn’t have to do that but everything fits good now. Next is a run video! @ Rocklin, California

Sometimes you gotta break out the ! The rear lockers didn’t quite fit on the AR44 Phat Steel axles... A little bumpi...
09/10/2019

Sometimes you gotta break out the ! The rear lockers didn’t quite fit on the AR44 Phat Steel axles... A little bumping and grinding and they’re a good fit now. @ Rocklin, California

Not easy to find these days but found a few of these steel axle housings to replace the stock axles on the rebuild I’...
09/05/2019

Not easy to find these days but found a few of these steel axle housings to replace the stock axles on the rebuild I’m doing. As soon I get them, I’ll post pics. :). The rig has come a LONG way with many parts from my old . More to come.

Been a quiet month for me in the world of RC. Replaced the stock plastic wishbone uppers on my with a 4 link setup. ...
09/03/2019

Been a quiet month for me in the world of RC. Replaced the stock plastic wishbone uppers on my with a 4 link setup. Wasn’t sure whether it would limit articulation, the good news, it’s exactly the same. Also added 12mm wheel extenders. Running on 2.2’s, I’m no where near scale but man does it have an awesome stance. 🙂 @ Rocklin, California

08/03/2019

The rebuild. Test run #01 with newer links, rebuilt servo, lockouts, knuckles, and c hubs by ... it was running good at but now it’s even running better.

Finished the rebuild on a Triple 4. I messed up the “seals” so I just heat shrink’ed the entire assemble. Also added ...
08/02/2019

Finished the rebuild on a Triple 4. I messed up the “seals” so I just heat shrink’ed the entire assemble. Also added my C hubs, knuckles, and lockouts. Nothing like looking through your parts bin to update one of your new trucks.

Wrenching on the . New ESC, new bilstein shocks, and some new hardware. Such a fun rig to work on. @ Rocklin, ...
08/01/2019

Wrenching on the . New ESC, new bilstein shocks, and some new hardware. Such a fun rig to work on. @ Rocklin, California

If you’ve been in the hobby long enough you know what a pain it is to plug your battery into a balance board or charger ...
08/01/2019

If you’ve been in the hobby long enough you know what a pain it is to plug your battery into a balance board or charger with a shortie. Making my BFF extended 2s charging cables. Honestly, I think I enjoy working on more than I enjoy driving them.

Address

Nevada City, CA
95715

Telephone

+19167731999

Website

Alerts

Be the first to know and let us send you an email when DTP Customs RC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to DTP Customs RC:

Shortcuts

Share

Category