MACHINE Putters

10/12/2026

🔥 M3A Adjuster Widebody — Titanium in the VIP 🔥

From aluminum to titanium, our look at the M3A Adjuster Widebody continues with this build photographed inside the VIP room at Integrity Golf Performance. 📸

Machined from Grade 5 titanium—6% aluminum, 4% vanadium, and the balance titanium—this chassis delivers exceptional strength with a finished weight similar to the aluminum version.

⚙️ Four tungsten Big Bore weights—two in the heel and two in the toe—push mass to the perimeter to maximize MOI. The weight drawer adds even more flexibility to dial in the total weight and feel.

Add V2 VMG face milling, the modular X‑CHANGER hosel system, and Delta Mod loft and lie adjustability, and you’ve got a traditional widebody blade packed with MACHINE technology.

📍 Book your putter fitting at Integrity Golf Performance in Frisco, TX.

🇺🇸 Milled in USA, made in Texas.

10/10/2026

🇺🇸 Texas-Made MACHINE M12 ZTX Earns a Spot in GolfWRX’s Zero Torque Top 10

Zero torque putters are everywhere right now, but which ones actual...

10/10/2026

🐗 MAMA HOG — THE NEXT EVOLUTION

This version of the MACHINE Mama HOG features our updated modular face, plumber’s neck hosel, and HOG Fat Shaft by UST, finished with a crisp, lasered HOG logo. 🔧

Our patent-pending Loft Spacer adds another level of adjustability, allowing loft changes to dial in your setup.

The substantial widebody blade profile carries the HOG character, while the modular construction gives us more ways to tailor your build.

Custom options. MACHINE craftsmanship. 🇺🇸 Milled in USA, made in Texas.

Contact our Tour Department to explore your Mama HOG build. Link in bio.

10/09/2026

⛳ M3A ADJUSTER WIDEBODY — DOUBLE-BEND OPTION

A different look at the MACHINE M3A Adjuster Widebody. This 6061 aluminum version features a light ash-gray finish—one of the finish and anodized color options available—with the same MACHINE technology and adjustability. 🔧

The standout on this build: the double-bend shaft.

Our modular shaft-over-stud system uses a threaded stud that screws into the head, with the shaft fitted and bonded over it. The Lower Delta Mod system still allows loft or lie adjustment, giving you another shaft configuration within the adjustable M3A platform.

Prefer no offset, half offset, or full offset? Double-bend options let us tailor the configuration and balance to your preference. Single-bend shafts are available, too.

The widebody blade’s Big Bore weights and optional DELRIN® or ULTEM® weight drawer let us dial in your preferred head weight. Traditional blade styling, with options to make it your own.

🇺🇸 Milled in USA, made in Texas.

Explore your custom build through the MACHINE Tour Department. Link in bio.

10/09/2026

🔥 DYNAMIC DELIVERY ON THE GREEN — IGP × MACHINE 🇺🇸

On the green in the VIP area at Integrity Golf Performance, with a MACHINE M3A Adjuster torched to perfection. 🔥

Precision milled from Grade 5 titanium—6Al-4V, approximately 90% titanium, 6% aluminum and 4% vanadium. This premium alloy combines high strength, low weight and corrosion resistance. Paired with our V2 VMG face grooves and a long-neck, full-offset hosel, this build brings classic blade style and MACHINE technology together in full color. ⚙️

Two names. One powerful combination.
💪 Integrity Golf Performance × MACHINE Putters.
An unstoppable pursuit of your best game.

At IGP in Frisco, home to the Cool Clubs Dallas-area fitting location, your entire game gets attention:

🏌️ Personalized lessons, teaching and coaching—including outdoor and on-course sessions.
🎯 Custom club fitting throughout the bag.
🏋️ Golf fitness, strength training and workouts tailored to your body and swing.
🧠 Mental performance and course-management coaching.
📊 Advanced swing analysis, biomechanics and purposeful practice.

Want your own place to work on your game? Ask about IGP’s private membership facility, with 24/7 member access, TrackMan bays, a PuttView putting green and a members’ lounge. Your access. Your practice. Your time. 🔑

On the putting green, MACHINE brings decades of experience, Level 3 Certified SAM Putting instruction and exceptional expertise in putter fitting. We connect your stroke with the specifications—and the custom build—that fit you.

🇺🇸 MACHINE Putters. The ultimate in custom putters.
World-class craftsmanship. Patented adjustability.
Milled in America. Made in Texas.

📍 Come see us at Integrity Golf Performance in Frisco, TX.
Book your MACHINE putter fitting and assessment—and explore an IGP membership to keep building your game.

🔗 Link in bio.

10/09/2026

🖤 M3A Wide Body Blade — Matte Black, Maximum Adjustability

Continuing our look at the MACHINE M3A Wide Body Blade, this 6061 aluminum version is bead-blasted and black anodized for a deep matte black finish—almost a BLACK CHALK look.

⚙️ Big Bore weights. Built to maximize MOI.
The wider blade and optional steel or tungsten Big Bore weights move mass toward the heel and toe, increasing MOI and allowing us to weight the putter to your specifications.

🔧 More weight. More options.
The weight drawer adds another level of adjustment, allowing additional weight within the head. Drawer options include machined DELRIN® or ULTEM®.

The plumber’s neck keeps the look traditional, while MACHINE’s modular hosels, X‑CHANGER shaft system, and upper and lower Delta Mods bring extreme adjustability to that familiar blade shape.

🇺🇸 Milled in USA, made in Texas.

Explore your custom build through the MACHINE Tour Department. Link in bio.

10/08/2026

⚙️ Extreme Classics: M3A Aluminum Wide-Body Blade ⚙️

Classic blade styling with MACHINE technology—and a wider head profile when viewed from above.

The M3A WideBody v2.0 Adjuster continues the design of our original standard-width M3, a limited-edition putter offered exclusively in titanium. The WideBody is available in aluminum or titanium, and this post puts the 6061 aluminum version in the spotlight. 👀

Precision CNC milling, VMG face milling, and a longer fl**ge line give this traditional-looking blade added visual mass and a confident look at address.

⚖️ Big Bore adjustable weights distinguish the M3A from the smaller ¼-20 weights used in the M1 and M10 models. Available in steel or tungsten, these weights let us build to your weight specifications. The wider blade and perimeter weighting also increase MOI, helping the head resist twisting on off-center strikes.

🎨 Three aluminum finish options:

▫️ Standard bead-blast — a lighter gray
▫️ Anodized battleship gray — a darker gray
▫️ Anodized black — a flat, matte black finish

The aluminum version offers a more affordable entry into the WideBody lineup, while titanium brings a premium material option. Both carry the MACHINE technology: modular hosels, the Delta Mod system, X-CHANGER shaft adapters, adjustable weighting, and custom alignment options. 🔧

📲 Visit machineputters.com and click BUILD YOURS to choose your finish, hosel, alignment, and more.

🇺🇸 Milled in USA, made in Texas.

10/08/2026

Remember HOG Putters? HOG Putters took the oversized putter concept to the extreme. Introduced by Dave Billings’ Dogleg Right in the mid-1990s, HOG putters featured huge heads designed to increase stability and resist twisting through impact. The original HOG pushed the concept even further with a massive 1-inch-diameter shaft, while later versions used smaller—but still unusually thick—shafts. Strange looking then, but the basic idea of a large, stable, high-MOI putter head was well ahead of where putter design was headed. Play Retro

10/08/2026

🖤 M4 CONVERTER FINALE

A custom order brings our M4M Converter series to its full-size finish: the HSX Megalodon — Heel Shaft X‑CHANGER.

This build features a special prototype full-offset, long plumber’s neck with a shaft-over-hosel connection. The shaft flows cleanly into the black oxide neck, giving this heel-shafted setup a sleek, almost seamless look.

A black oxide face, DELRIN® Morph spacer, and black 6061 aircraft aluminum Square Cut Megalodon fl**ge complete this all-black build. Internal fl**ge weighting brings it to the customer’s final weight specification.

Throughout this series, you’ve watched the M4M Converter move from a traditional blade to a widebody blade, through smaller mallet and blade-mallet hybrid configurations, and finally into this full-size Megalodon.

The same head. The same platform. So many ways to build it.

That’s the versatility of the MACHINE M4M Converter—modular fl**ge options that let the platform evolve with your preferences.

🇺🇸 Milled in USA, made in Texas.

Book at Integrity Golf Performance (Frisco, TX). Link in bio.

10/07/2026

🦈 M4M CSX Megalodon — Mega Mallet Mode

The M4M Converter takes on its full mega mallet form with the Megalodon fl**ge and CSX center-shaft configuration.

Built around our modular head-and-fl**ge platform, the M4M can morph from a traditional blade to a widebody blade to this full-size Megalodon. The optional Morph spacer adds width and weight, giving us even more room to dial in your build.

Hidden adjustable weighting inside the fl**ge lets us tune total weight and weight distribution—forward, back, heel or toe. Add MACHINE’s modular hosels, X‑CHANGER shaft system, Delta Mod adjustments and VMG face milling, and the customization goes well beyond the shape.

Milled in USA, made in Texas.

Book at Integrity Golf Performance (Frisco, TX). Link in bio.