Wateree Tactical Group

01/02/2019

10/14/2017

Couple spots left for tomorrow’s match, sign up while you can!

https://practiscore.com/sss-uspsa-october-2017/register

Monthly USPSA pistol match. 6 stages (including 1 classifier) For more information, please visit our web page. http://sandhillshootingsports.com/shooting-groups-leagues/pistol-competitions/ No refunds on match fees after 5 PM the Friday prior to the match. Online registration closes at 9:00 PM the d...

09/30/2016

MK Machining Bolt K**b Review
So once I seen MK machining made a 3-d printed bolt k**b I decided to pick one up and give it a try. I have been running a surgeon bolt k**b on my stiller tac30 for a while now and this one is a similar shape so why not give it a shot. My first impression was it's a lot lighter, and a lil bigger around and longer. None of which I think is a bad thing, I like how it's bigger and easier to find, but if that don't work for you then trim it, should be easy since it is plastic. Next was to mount it on my bolt, honestly it was kinda hard to get the threads started , they are 3D printed as well. Still it only took 5-10 seconds to make sure I was starting the threads correctly as to not cross thread, so not really hard to do just worried me a bit. Anyway It threaded up nicely and looks great! I would love to see some different colors as well, I predict they will ,judging from some of their other products. Finally I got in a prone position and started dry firing , really working the bolt hard between each trigger press . I have 1500 rounds through this rifle, and have dry fired with bolt manipulation on my old bolt k**b 2-3 times that amount. So it did feel a little weird at first , but I found I can run the bolt faster with the new k**b. I can tell it's lighter and it's a big plus for me for the bolt k**b to be bigger as well, really makes it easy to still find it if I try to push it faster. All in all it's seems very solid and I'm leaving it on my rifle , going to post some vids of me torture testing it soon, but I don't foresee have any issues. Rock solid and affordable, I would recommend it to anyone!

09/25/2016

Stages for tomorrows September 3-gun match. Stages are still subject to change. thank you.

09/18/2016

Took 1st place At Wheaton Arms Overwatch OPRS match today, and 1st overall in the bolt gun division for the 3 match series! Thank you Robert Wheaton for a great series, keep up the great work! And a big thanks to Vortex Optics , MK Machining, Blue Bullets, Carolina Tactical Group, Recoil Ju**ie, Tactical Firearm Finishes, Sandhill Shooting Sports, LLC, Tactical Santa, Kahntrol Solutions, y'all guys rock, thank you for all the support!
-Ashton Johnson

09/07/2016

If you want to see teasers for upcoming 3-gun stages at Sandhills shooting sports I will be posting them on Instagram , follow me @ _ashton_johnson_ ! Thank you

09/07/2016

My kids and me recreated that pic floating around the Internet, they had a blast setting this up!

08/20/2016

Check this out! Going to be an awesome weekend, long range shooting out past 1000 yards ! But only if they get enough interest, please share!

http://www.honorcarolinas.com/

Shop

08/04/2016

06/27/2016

Another successful 3-gun match in the books! Huge thanks to all the sponsors that donated to our prize table, Kahntrol Solutions , Vortex Optics, Fort Mill Munitions LLC, Freedom Munitions (Official), Sandhill Shooting Sports, LLC, Tactical Firearm Finishes. Special thanks to Kahntrol solutions muzzle brakes and Vortex optics, couldn't of got 3rd with out y'all ! And thank you to all the volunteers and ROs , hats off to y'all , it was miserably hot out there! Thank you!

https://practiscore.com/results/22044

https://practiscore.com/results/22044

05/21/2016

I don't know what would of happened if we actually hit one, probably would of threw the plate over the next berm .😂😂

05/02/2016

BASIC
PRECISION
RIFLE
You will Learn:
- How to hit to targets out to 600 yards with opportunity out to 840 yards
- Marksmanship Fundamentals
- To identify and use common long range shooting calibers, platforms, scope requirements, and gear
- Proper shooting techniques from the prone shooting position
- To determine proper rifle setup to achieve maximum accuracy
- External ballistic factors
- To calculate elevation (bullet drop) and windage adjustments
Class Take-aways:
- Chronographed rifle and accurate ballistic chart out to 1,000 yds
- $$$ saving education on caliber/platform/scope/equipment you should purchase
DATES: May 14 & 15, 2016 (16 hours) COST: $325 Class size limited

Contact: Scott Windham [email protected] (843) 858-0360
Ashton Johnson [email protected] (803) 669-1183

Required Items:
1. Scoped centerfire rifle (caliber of your choice) capable of shooting a three shot 1” group at 100 yards or better
2. 150 rounds of match grade ammo - Factory or hand loaded ammunition is acceptable for this class
3. Magazines (if appropriate)
4. Scope should be a target or tactical type with adjustable turrents and some type of mil or moa reticle (preference would be target turrents and reticle in mils)
5. Rifle mounted bipod. Preferably 6”-9” Harris or Cauldwell type swivel bipod.
6. Squeeze bag/sand sock (rear)
7. Pen/Paper for notes
8. Eye/ear pro
9. Ballistic calculator/dope chart (if you have it, if not , we will build one for you)
10. Hydration/snacks/lunch
Optional items:
11. Binoculars
12. Range finder
13. Sack chair
14. Sunscreen
15. Shooting mat


May 14 - Darlington area (AM – Classroom/PM - Lake DARPO 100 Yd. Range)
May 15 - Near Aynor, SC (840 Yd. Range)

Alumni welcome

Payment Options:
A $100 deposit reserves your spot in the class.
Payment Methods:
Paypal to [email protected]
OR
Check/Money Order mailed to:
Scott Windham
1817 High Hill Rd.
Darlington, SC 29532

Please be sure to include name of participant in the notes section