Wood Bros Sporting Arms & Repair

Wood Bros Sporting Arms & Repair Retail and Full Line Gunsmithing

Contouring the aft portion of a BRN-4 barrel to match its shorter, lighter counterpart. After machining the barrel was ...
05/28/2025

Contouring the aft portion of a BRN-4 barrel to match its shorter, lighter counterpart. After machining the barrel was re-parkerized.

A Marlin mod. 45 “Camp Carbine” threaded .578”-28 with a shop made shoulder collar.
05/27/2025

A Marlin mod. 45 “Camp Carbine” threaded .578”-28 with a shop made shoulder collar.

An interesting piston driven R***r upper that we cut back, threaded, and pinned and welded as close to 16” as we could w...
05/15/2025

An interesting piston driven R***r upper that we cut back, threaded, and pinned and welded as close to 16” as we could while still being able to remove the piston plug.

***r ***r

A Daniel Defense Mk18 Cerakoted in a subdued camo of black, OD, and grey.
05/14/2025

A Daniel Defense Mk18 Cerakoted in a subdued camo of black, OD, and grey.

It’s been a while since we’ve posted anything… but this one’s pretty neat.It’s a Re*****on XP-100, chambered in .221 Re*...
05/13/2025

It’s been a while since we’ve posted anything… but this one’s pretty neat.

It’s a Re*****on XP-100, chambered in .221 Re*****on Fireball. Super cool, other than the availability and cost of ammunition.

We reamed the chamber to a .223 Wylde which will accept a .223 Rem or 5.56x45, and increase the ammo options exponentially.

When a few rounds of “remanufactured” 5.56 that were supposed to have been discarded find their way into the factory amm...
03/26/2025

When a few rounds of “remanufactured” 5.56 that were supposed to have been discarded find their way into the factory ammo box.

The shoulder separated cleanly from the rest of the case and the shoulder and neck stayed attached to the bullet as it started down the bore. The lead core was shot out of the jacket and the case head failed under immense pressure.

The condition could have been from bad annealing, an undercharge detonation, or a combination of things. The bolt was fully locked/in battery and luckily the gun did what it was supposed to do and absorbed and redirected the energy/gasses. The rifle is a loss, but there was no injury to the shooter.

**t **tar

Threading a Mosin-Nagant 91/30 (7.62x54R) SBR in M14x1 LH. The 12” barrel was previously saw cut flush to the end of th...
03/25/2025

Threading a Mosin-Nagant 91/30 (7.62x54R) SBR in M14x1 LH. The 12” barrel was previously saw cut flush to the end of the stock by the owner I presume.

After a day or so of letting penetrating oil do its thing, the barrel was pulled off the action and the barrel then faced, crowned, and threaded. The stock just got band sawed and the owner will do whatever shaping they desire.

The thread length was done at a fairly standard length for future muzzle device changes since the Wolverine-PBS seats against the muzzle and not the shoulder.

Cutting a Wi******er 94 back to 16”, threading 9/16”-24 to accept a Precision Armament adapter up to 5/8”-24, and shorte...
02/27/2025

Cutting a Wi******er 94 back to 16”, threading 9/16”-24 to accept a Precision Armament adapter up to 5/8”-24, and shortening & converting the magazine tube to an 1895 retention style.

******er ******er94 #3030 ******er

A version of the infamous Tec 9, threaded 1/2-28. These barrels are not reasonably removable, so a big long center was ...
02/26/2025

A version of the infamous Tec 9, threaded 1/2-28. These barrels are not reasonably removable, so a big long center was made to reach through the receiver in order to turn the barrel between centers.

Three Brownings and a R***r threaded to accept the owners suppressors/muzzle devices. The three with the SilencerCo ASR...
02/19/2025

Three Brownings and a R***r threaded to accept the owners suppressors/muzzle devices. The three with the SilencerCo ASR brakes had the shoulder timed to eliminate the need for shims.

With the sharp rise is silencer/suppressor popularity in recent years… we thread just as many hunting oriented rifles as target/bench and gov’t-be-good rifles.

***r ***rrifles

Cutting and threading a form 1’dKriss Vector .45 ACP. Threaded .578x28.
02/18/2025

Cutting and threading a form 1’dKriss Vector .45 ACP. Threaded .578x28.

Address

4120 Crippen Road
Knoxville, TN
37918

Opening Hours

Tuesday 10am - 6pm
Wednesday 10am - 6pm
Thursday 10am - 6pm
Friday 10am - 6pm
Saturday 10am - 4pm

Telephone

+18659100697

Website

Alerts

Be the first to know and let us send you an email when Wood Bros Sporting Arms & Repair posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Wood Bros Sporting Arms & Repair:

Shortcuts

Share

Category