Lone Star Tactical Supply

Lone Star Tactical Supply Lone Star Tactical Supply was founded by shooters for shooters.

The woke Facebook liberals saw fit to remove a post from 2017 saying it does not "follow our Community Standards" I hav...
11/22/2021

The woke Facebook liberals saw fit to remove a post from 2017 saying it does not "follow our Community Standards" I have attached the offending post below.

My question is, If this is true, why wait over 4 years to make this decision?

Because Facebook is a private company they can be as unfair as they want. I'm sorry if my posts offend their views but rest assured that our Law Enforcement only fi****ms does not offend our men and women in blue that use these tools to protect the public.

You can always go to our website https://lonestar.supply/ if Facebook continues to block content here.

10/22/2021

Closing a 3pm today and all day Saturday to attend fi****ms training. Back in normal operation on Monday.

We will be closed on Monday 5 July 2021 to celebrate our country's independence.
07/02/2021

We will be closed on Monday 5 July 2021 to celebrate our country's independence.

The shop will be closed Saturday June 5. We're going shooting...........
06/03/2021

The shop will be closed Saturday June 5. We're going shooting...........

The shop will be closed in honor of Memorial Day, May 31, 2021.
05/27/2021

The shop will be closed in honor of Memorial Day, May 31, 2021.

05/11/2021

We reached a milestone of 900 likes on our page. A big Thank You to all our friends. We hope you will continue to support our work.😀

SB Tactical FS1913 Pistol Stabilizing BraceA low-profile, left side-folding, strut design compatible with all platforms ...
04/27/2021

SB Tactical FS1913 Pistol Stabilizing Brace

A low-profile, left side-folding, strut design compatible with all platforms utilizing an M1913 (Picatinny) interface at the rear of the receiver. The FS1913â„¢ is a complete assembly offering pull-through opening and a solid lock-up when extended.

Tactical MPX Pistol Stabilizing Brace for SIG SAUER SIG MPX and SIG MCXThe MPX PSBâ„¢ is an innovative, 3-position adjusta...
04/27/2021

Tactical MPX Pistol Stabilizing Brace for SIG SAUER SIG MPX and SIG MCX

The MPX PSB™ is an innovative, 3-position adjustable Pistol Stabilizing Brace® dimensioned to fit the receiver cuts of the SIG SAUER SIG MPX and SIG MCX. Ships as a complete assembly, ready-to-install, including an M1913 receiver saddle.

Bravo Company MFG Bcmgunfighter Stock Mod 1 - CompartmentFits Mil-Spec AR-15
04/21/2021

Bravo Company MFG Bcmgunfighter Stock Mod 1 - Compartment

Fits Mil-Spec AR-15

FN AR-15 BarrelFN AR­15 premium button rifled barrels are are manufactured using U.S. sourced Chrome Moly Venadium mater...
04/08/2021

FN AR-15 Barrel

FN AR­15 premium button rifled barrels are are manufactured using U.S. sourced Chrome Moly Venadium material per Mil-B-11595E. Each barrel is High Pressure Tested (HPT) and Magnetic Particle Inspected (MPI) to ensure that it is free of micro­stresses or flaws, resulting in consistency and quality in every barrel shipped from the factory.

5.56 x 45 NATO
Length: 16" & 18"
Profile: M16A2
Gas Length: Rifle
Twist Rate: 1:7
Part #: 29-100042

Surefire high-capacity magazine60-Round Magazine for 5.56 mm (.223 Re*****on) RiflesOnly 1.66 inches thick, less than tw...
03/29/2021

Surefire high-capacity magazine

60-Round Magazine for 5.56 mm (.223 Re*****on) Rifles

Only 1.66 inches thick, less than two 30-round magazines clipped together

Sixty-round magazine is approximately the same length as two 30-round magazines clipped together

Compatible with all weapons that accept standard STANAG 4179-compliant magazines

Reliable function due to mechanical simplicity and high-quality non-binding coil springs and nesting polymer followers — no lubricants required

Long-lasting, cadmium-coated springs for low friction and excellent corrosion resistance

Get them while they last !!!

Eleven 10 MedicalThe Eleven 10® TQ Pouch is a versatile cost-effective tourniquet carry solution. Compact and durable, t...
03/06/2021

Eleven 10 Medical

The Eleven 10® TQ Pouch is a versatile cost-effective tourniquet carry solution. Compact and durable, this pouch is made with premium, duty-proven materials. Incorporating Blue Force Gear’s ULTRAcomp® and 6/12™ Fabric from First Spear®, it can be worn on your duty belt utilizing the VELCRO® Brand ONE-WRAP® strap, or you can utilize the included Malice Clip to mount it to any MOLLE/PALS webbing. The pouch includes a PVC Cross Patch for easy recognition and incorporates a drain hole to rid the pouch of excess moisture. The pouch is designed to protect your TQ from the elements, implementing the same access and deployment methods as our RIGID TQ Case Jacket, keeping it swift and familiar across our product lines.

Features:

Cost- Effective Carry Solution for the C-A-T® Gen 7 (and legacy), SOF®TT (NH and W Family), and the SAM® XT Tourniquets

Can be worn Vertical (MOLLE), Vertical (Belt), and Horizontal (Belt)

Medical Identifying PVC Cross Patch Included

Attached to Duty Belts Using the VELCRO® Brand ONE-WRAP® Strap

Attached to MOLLE/PALS Using the Included Malice Clip

Made with 500D Cordura, ULTRAcomp®, and 6/12™ Technical Fabrics

All of Eleven 10®’s products are designed, manufactured and assembled in the USA.

Address

10015 N Eldridge Pkwy Suite E107
Houston, TX
77065

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 3pm

Telephone

+18324789604

Website

Alerts

Be the first to know and let us send you an email when Lone Star Tactical Supply posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category