TNT Performance Engineering

TNT Performance Engineering Owner and Founder Tim Tynan established TNT in 1987, dedicated to building and testing race products. Inhouse machine shop fab shop, dyno, ecu tuning

With over 260 national and world Championships in 23 different Motorsports disciplines. With 30yrs experience building race engines, full in-house machine shop, Ecu programming and extensive turbo and efi knowledge we have you covered from start to finish.

04/09/2026
04/08/2026

Tnt hood scoop Install video for 25-26 pro R

The TNT 2025-26 hood scoops are in stock and  ready to ship.
03/15/2026

The TNT 2025-26 hood scoops are in stock and ready to ship.

25-26 hood scoop
12/01/2025

25-26 hood scoop

09/25/2025
Hood scoop install instructions Tnt Pro R Turbo R,  hood scoop install instructionsRemove the stock hood bonnet. At two ...
05/14/2025

Hood scoop install instructions

Tnt Pro R Turbo R, hood scoop install instructions

Remove the stock hood bonnet.
At two back corners loosen the body panel bolt but don’t remove.
Using a Exacto or razor knife cut the slot in the black felt under cover. The slot bottom is to be cut on the edge of the back floor right on the seam, 9.5to10” wide.
Slot both ends of your cut vertically 1.6 inches high.
Be carful cutting the top edge as there is a metal tube behind the felt. There are no factory wires or hoses behind there. Be careful if you have aftermarket accessories that may have routed wires through the area.
The front lip need to be cut flush with the base to allow scoop to bolt flush to hood.
Remove the two front body bolts and use those to screw the front two hood scoop mounting holes.
Do not over Tighten body bolts
1 or 2 lbs of torque is all that is needed. Or just slightly tighter then you can get with gripping 3/8 extension in your hand.
Remove your rear firewall to Access the belt cover and l**e the two factory wing nut hose clamps on Secondary inlet hose to belt box with a spray l**e and then tighten firmly by hand.
Or replace factory hose clamps with better quality.
Tightening the clamps dry will not yield enough clamping force and the hose could blow off if you exceed 80mph head winds

The best cooling  system for both passenger and belt temp on the market.  Our patented air diffuser system blocks radiat...
04/13/2025

The best cooling system for both passenger and belt temp on the market. Our patented air diffuser system blocks radiator heat from getting to the firewall, increasing air flow to belt by 300%.
6-15 min install depending on your razor knife skills. Tools to install, razor knife with new blade and t40 bit. These can only be purchased from authorized dealers, or from tnt performanceeng.com. There no dealers on Facebook selling them so don’t get scammed!
Tnt dealers.
Pro UTV parts- Utah
Just money Motorsports- lake havasu
One offroad Las Vegas

Install video by one offroad

https://www.facebook.com/reel/1499450464010124?fs=e&s=TIeQ9V&fs=e&mibextid=wwXIfr&fs=e

Over 2,200 miles of dusty silty desert and belt box is clean. Tnt Inlet Screen and hood scoop stuffs enough air to blow ...
03/30/2025

Over 2,200 miles of dusty silty desert and belt box is clean. Tnt Inlet Screen and hood scoop stuffs enough air to blow out all dust. Only dust built up will be belt dust if you do a lot of slow speed

Tntperformanceeng.com  our website is finally live and working.  All our products and pricing are on our website
11/06/2024

Tntperformanceeng.com our website is finally live and working. All our products and pricing are on our website

WHO WE ARE About TNT Performance Engineering At TNT Performance Engineering, we are passionate about precision, power, and performance. Specializing in high-quality performance machining and fabrication, we are dedicated to bringing our clients' visions to life. From custom engine builds and tuning....

Dear Facebook, since you clearly can no longer read, let me help you out. It says on my profile right in the Bio that no...
10/11/2024

Dear Facebook, since you clearly can no longer read, let me help you out. It says on my profile right in the Bio that no one can copy my pictures or content. Yet if i say i could have strangled someone for doing something you put me in Facebook jail. You can read those words just fine.
But if someone copies my profile uses all my pics, name and everything on my profile that says you can’t copy and goes and runs scams on people and steal thousands of dollars. You don’t hear that, when the profile is reported by more then 10 people you still say there profile doesn’t brake any rules and allow it to continue. WTF is wrong with you. You can find a FU in seconds but god forbid you come up with a way to stop impersonation and theft. I’ve pulled all my adds, i will not advertise again. I will suggest to anyone thinking of advertising on Facebook not to as some scammer will see your add then run around in all the private rooms and use your name and try and scam as many people as possible. You never once see them do it as they block you, you can’t report it as a clone because they block you. Your friend list won’t see it because they will block all of them. And Facebook allows this to happen 3-4 times a week for past 14 weeks since i ran an add on our product.
This isn’t what i thought boost your products meant dear Facebook

Avoid the Facebook scam attempts. There are no dealers selling on Facebook, regardless of there name there using.  Tnt h...
10/06/2024

Avoid the Facebook scam attempts.
There are no dealers selling on Facebook, regardless of there name there using. Tnt has only advertised the product and what it does.
You have to purchase from a tnt dealer or tnt direct.
Proutvparts.com
Banning Motorsports
Just money motor sports
Auburn extreme power sports
One off-road
Tntperformanceeng.com

Address

Georgetown, CA
95634

Opening Hours

Monday 10am - 9pm
Tuesday 10am - 9pm
Wednesday 10am - 9pm
Thursday 10am - 9pm
Friday 10am - 9pm

Telephone

+15592178734

Alerts

Be the first to know and let us send you an email when TNT Performance Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to TNT Performance Engineering:

Share