Top Notch Speed And Machine Shop

Top Notch Speed And Machine Shop Kart Speed Shop including chassis, engines, tires, wheels, prep, technical help. Top Notch Speed Shop carries all your go kart racing parts.

If its not in stock ask and we can get it.

Just some stuff we have worked on lately.
05/09/2021

Just some stuff we have worked on lately.

09/29/2020

We are now a dealer for Champ Racing Pans.

Champ offers some of the nicest pans on the market. But they also offer several other products. Valve covers. Pulley set ups. And even custom products.

We will have pans in stock this week and will keep a few different styles in stock for the small block Chevy.

Top Notch Speed Shop by Hoke Equipment got some new toys.
08/02/2020

Top Notch Speed Shop by Hoke Equipment got some new toys.

11/15/2019

We are back in full force on building Kart motors again.
NKA/ AKRA
Stock appearing
Mars Factory
Mars Pro Stock
Small block open.

We will also do just machine work if you prefer to have just that done as well.

2 week turn around on rebuilds or new builds on most builds.

18707150056

03/06/2019

Engine parts for sale

1. 4 bolt 350 .030 over block. Freshly cleaned. Honed. Ready for assembly.

2. 4 bolt 350 .030 over block freshly bored. Honed. Cleaned. Ready for assembly.

3. 4 bolt 350 .040 over. Needs bored. Honed. And finish cleaned.

4. 882 Chevrolet heads. Ports have been worked. 2.020 1.60 valves. Just taken off engine.

5. 882 Chevrolet heads. These heads will have new bronze guides. Stock port. 3 angle valve job. Stainless stock length valves. Screw in studs with guide plates. And springs and retainer for your rules. Milled. Cleaned. And ready to go on a engine.

6. Several stock 350 cranks. Some were reground but got surface rust. Some are stock and need ground.

7. Rotating assembly. .030 over. Has about 4000 miles on it. Pistons. Rods. Crank. All in very good shape and cleaned. Not balance. Flat top stock pistons. Stock rods. Stock crank

8. Rotating assembly. .040 over. Installed in a motor. Broke in. And never used after. Crank. Rods. Piston. All in very good shape and cleaned and ready for assembly. Not balanced. Stock flat top pistons. Stock rod. Stock crank

9. 882 heads. I have a few sets of untouched heads. They will need cleaned and all machine work.

02/18/2019

A few of our machining capabilities.

Head decking
Block square decking
Cylinder boring. Large and small engines
Cylinder automatic honing
Cylinder sleeping large and small
Complete cylinder head jobs. Seats. Guides. Valves. Springs. Threaded studs. Guide plates ect....
Jet Spray washing and cleaning.
Crankshaft polishing

We offer full custom blueprinting assembly of performance and stock type engines. As well as we have a very good supplier who carries almost any engine product you could want at competitive prices.

We have a hot dip tank coming soon also for cleaning some of those old blocks that have been laying around a while.

We are outsourcing all crankshaft grinding. Rotating assembly balancing. Crack detection. And line honing.

We also have a nice size precision large and milling machine. With that being said we will not only he doing motor machine work. We will be doing anything that we feel we are capable of and anything that pays the bills. We have a good design software to aid in creating items you may want.

01/20/2019

Top Notch Speed and Machine Shop. Starting the 2019 season off we will be offering more services and adding new customers and friends. We now have a open machine shop that will have new machines regularly added to it. We will be offering Performance race car engines from oil pan to intake and everything in between. This also means that we will be offering more services for the kart guys as well for the stock appearing and open class builds. As well as all in house machining on the stock class engines as well.

We will not be just a engine machine shop either. I will be able to machine many different types of parts or fixtures for any other needs you may have as well.

We are 4 motors behind for big car motors and 3 motors behind on the kart side. As more of these big car motors are done the list will start to grow. So get with me soon to get on the list or if you are just looking for options.

We will also be matching regular car and truck type engines from gas to diesel as well. So keep that in mind.

What a weekend.  Talk about a racing hangover.  Top Notch Speed Shop had a great weekend at the Lowe Boats I-44 Winter s...
12/31/2018

What a weekend. Talk about a racing hangover.

Top Notch Speed Shop had a great weekend at the Lowe Boats I-44 Winter shootout in Lebanon Missouri. Brennon Willard and Crew put on a great show.

Kyle Schmidt Piloted the House kart in the Pro Clone and clone light class. We ended up with a 3rd place in Pro Friday and 3rd place on clone light Saturday. Saturday we came out on top in the Pro Clone Division with the big win of the weekend.

Logan Johnson struggled some on Friday early on in the junior two division. But would come out on top Saturday with the win in the Junior 2 heavy class.

Josh Farris jr ran the Clone light class and had a few heat race wins with great speed but fell short on luck in the features.

Aiden Farris ran Junior 2 light division and had some really good speed. Several times he made it to the front only to be taken out by the same one or two kids on restarts.

Cooper Morrow ran junior 1 light class for his debut into the junior 1 class from rookie. He struggled Friday until late in the feature and found his groove. Saturday he was much much better but he still needs some track time.

Special thanks goes out to these people. If you want or need products from any of these people feel free to contact me. I will also provide support on these products.

Dover Power Engines. Carbs. Headers.
Fast Forward Tire Solutions Tire Prep
Fast Forward Clutches
Palmetto Speed Shop
Luakitis Racing

Jerry Dover has been with Top Notch from the beginning and has become an even bigger part of our operation.

James Raines has always been a good friend and someone to go to for advice. We have ran his product off and on since Top Notch was started. This indoor season we have teamed back up to bring our customers a line of clutches and tire prep. And it is paying off.

Top Notch Speed Shop will be attending the Lowe Boats I44 Winter Shootout again this year for there December and January...
12/21/2018

Top Notch Speed Shop will be attending the Lowe Boats I44 Winter Shootout again this year for there December and January races.

We will have Tire Prep on hand and available for purchase. This will be the same prep we are running ourselves.

We will also have James Raines from Fast Forward Clutches on hand rebuilding and selling clutches. You can bring your clutch by and get it serviced or fully rebuilt on hand during the weekend. Prices will be greatly better than sending them in and waiting on them also.

Here is the driver line up.

Cooper Morrow Junior 1
Aiden Farris Junior 2
Logan Johnson Junior 2
Josh Farris Jr Adult Clone
Kyle Schmidt Adult Clone

If you need anything brought to the track or have questions about the weekend feel free to contact me. We are gearing up for a great weekend.

Another happy customer headed back to missouri today with there new TopNotch edition PRC MINEcon
02/24/2018

Another happy customer headed back to missouri today with there new TopNotch edition PRC MINEcon

Address

8886 Old Highway 62 E
Flippin, AR
72634

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Alerts

Be the first to know and let us send you an email when Top Notch Speed And Machine Shop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share