Elite Accuracy LLC

Elite Accuracy LLC Welcome to Elite Accuracy LLC, We are a licensed FFL holder, we offer custom rifle building services and provide precision rifle training at long range.
(1)

Elite Accuracy operates a competition rifle range, crafts and assembles custom bolt action rifles, and offers shooter training, molded around advancing your current skill level.

09/14/2025

PLEASE SHARE: Sooner State Safari has changed its name to Best of the West Hunter a NRL Hunter series precision rifle match held in Bartlesville, Oklahoma.

As has been known for a while Elite Accuracy LLC is closed effective May 1st 2025!Do not proceed with any shipping of pa...
05/03/2025

As has been known for a while Elite Accuracy LLC is closed effective May 1st 2025!
Do not proceed with any shipping of parts.
If you need a recommendation for your future work, I can recommend a business I trust.

Thank You to all my past customers for your support, it has been a great ride.

The NRL Hunter,  Sooner State Safari ran like clock work.Thank you shooters ROs and Sponsors for supporting Elite Accura...
03/18/2025

The NRL Hunter, Sooner State Safari ran like clock work.
Thank you shooters ROs and Sponsors for supporting Elite Accuracy rifle matches.

3 top end builds out of the shop.A few more to finish in the next few weeks.Will I miss it?
03/18/2025

3 top end builds out of the shop.
A few more to finish in the next few weeks.
Will I miss it?

It has been a fantastic run.Thank you to all my customers and students these last 10 years.I will be retiring from the r...
02/11/2025

It has been a fantastic run.
Thank you to all my customers and students these last 10 years.
I will be retiring from the rifle building/training/matches, in April. (This page will be deleted)

Time for new adventures.

I'm a rifle builder who can fix almost anything. This wasn't one of my builds, but in 60 minutes I made it as good as po...
12/15/2024

I'm a rifle builder who can fix almost anything. This wasn't one of my builds, but in 60 minutes I made it as good as possible.

Ron put his EA built 30 Nosler to work this fall.
12/15/2024

Ron put his EA built 30 Nosler to work this fall.

Wrapped up 2 smokeless muzzle loaders, this was a finishing project. Bedding and cerakoat.
10/26/2024

Wrapped up 2 smokeless muzzle loaders, this was a finishing project. Bedding and cerakoat.

Two customers with twin 6mm creedmoors built this summer putting in work. Oregon black tail, one is a giant at 147 inche...
10/26/2024

Two customers with twin 6mm creedmoors built this summer putting in work.
Oregon black tail, one is a giant at 147 inches.
Congrats guys.

Customer had a 45 cal smokeless muzzle loader built, with a barrel too tight (in spots) to get swaged bullets down the b...
09/27/2024

Customer had a 45 cal smokeless muzzle loader built, with a barrel too tight (in spots) to get swaged bullets down the barrel. Pretty much an unlapped button rifled barrel with very poor tolerances on bore uniformity.
He asked for me to fit a new barrel. We discussed he obviously needs a better barrel manufacture than he used with the last builder.
But then I dialed it back and said " let's just lap the barrel you have, bring all your stuff, " Bullets swagger, rifle ect.
Skeptical at first, he agreed to let me try and save him money.
After assessing the rifle myself,
I poured molten lead down the bore with a rod inserted to accept the lead, charged and lubbed the lap and went thru the process. Then I cut a new crown to finish it off.
It went great, bullet seating was smooth and consistent, just like the results on target.

Talking to an expert and listening is the easy part.
Finding an expert in the trade is the hard part.

Just having fun with a customer.😁6 Dasher on a re build by EA.This is the second Eliseo tube gun I have rebarreled for p...
09/27/2024

Just having fun with a customer.😁
6 Dasher on a re build by EA.
This is the second Eliseo tube gun I have rebarreled for poor performance. What's the difference? proper understanding of the principals of quality machining and stress free fitting of parts. Oh and a great barrel, .

I'm 98% set up and ready for this weekends The Vortex Rampage. Alot of work goes into a quality rifle match, I hope all ...
06/06/2024

I'm 98% set up and ready for this weekends The Vortex Rampage. Alot of work goes into a quality rifle match, I hope all the shooters attending enjoy this PRS event.

Address

Decorah, IA
52101

Telephone

+14054348905

Website

Alerts

Be the first to know and let us send you an email when Elite Accuracy LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share