Dalton Custom Kydex Holsters

Dalton Custom Kydex Holsters I make custom kydex holsters and knife sheaths. Drop leg, mid drop, chest rigs, and other.

P365 with built in claw and single mag carrier.
06/04/2025

P365 with built in claw and single mag carrier.

04/04/2025
09/25/2024

I hope everyone is preparing for the storm that is forecast to come through. It might be a good idea to tie things down and move trash can to areas that the wind can’t below down. Check for trees and limbs that might become a danger because of rain and wind that can cause to fall or blow down.
I remember when hurricane Opel came through many years ago. My family at the time were located in Douglas county. It was a fast moving system with winds of 60-70 miles per hour sustained for several hours through the night. We lost electricity from an electrical pole that fell right in front of our home. We were without electricity for a week. All of the food in our freezer and refrigerator was lost. My basement was flooded and we had a large Pine tree that fell and broke on top of our roof. Fortunately no one was hurt. Check on neighbors and the elderly to make sure that they are safe. An ounce of prevention can save a world of hurt and suffering. Also if you see down power lines contact your local utility companies and don’t mess with it. Like I say I have personally been through these situations in the past and had to learn the hard way. Most of all be prayful to our Heavenly Father for his protection for our local people and really everyone. There is so much going on in the world today that is not good, causing worry and strife. Let’s be good friends and neighbors and watch out for each others during this time. If you can help someone in need please do. Hopefully this storm will not be as bad as the one I was talking about from my past. Let’s be good neighbors here is Dalton and the surrounding areas. Watch
out for each other especially the elderly, and the handicapped. Do what you can to be prepared.
God bless you all and thank pray.
Greg Carter

Here is a Ta**us Judge that I have just made. This would also work well with a chest rig setup. Message or call me. Than...
08/27/2024

Here is a Ta**us Judge that I have just made. This would also work well with a chest rig setup. Message or call me. Thanks

Just finished this Dan Wesson (own by CZ ) DWX 2011 9 mm full size with a X300 ultra light. Customer wanted this holster...
07/08/2023

Just finished this Dan Wesson (own by CZ ) DWX 2011 9 mm full size with a X300 ultra light. Customer wanted this holster to work with the Safariland QLS dropleg system. This is one sweet firearm. Comes with a very sweet somewhere around a 3 pound trigger.
Give me a call or text at 706-264-2048. We can make just about anything you might need for kydex holsters and rigs, OWB, IWB, Chest rigs, or drop-leg holsters as well. I also can build compact double or triple 556/223 with pistol mags on a rig set up. If you have something that you are interested in doing but don’t know where to start just give me a call. I love making different type of gear. Also I gave started adding conceal carry in the top chest area of bib overalls.
Thanks
Greg Carter
Dalton Custom Kydex Holsters

These are some resent photos I have been working on. Give me a call, text or message
06/23/2023

These are some resent photos I have been working on. Give me a call, text or message

Good evening everyone. I first want to say I’m sorry for not posting in a while. I have had some health issues to come u...
05/30/2023

Good evening everyone. I first want to say I’m sorry for not posting in a while. I have had some health issues to come up with my continuing episodes of afib flatwups. I’ve had several customers and others to ask me about what is going on. I’m going to my heart specialist tomorrow afternoon to hopefully have some news about what my stress test revealed. I will pass alone what the results have turned up. Getting older is quite an adventure, LOL. Ok, enough about my medical concerns and some things I’m working on. Here are a couple of chest rigs I’ve done recently. Mine are adjustable to fit just about anyone. Also, I’ve been working on some drop-leg setups as well. We are also building a good many level two and level 3 systems as well. Security company needs are becoming a bigger part of my business. Please let us know if you are needing something different but not sure if I can be done. Just let me know. I will bend over backwards to make it happen if I possibly can.
Thanks for your care and your business. God bless
Greg Carter
Dalton Custom Kydex Holsters

Let us help you with just about any kind of holster that you may interested in, but don’t know where to start. Call or m...
04/09/2023

Let us help you with just about any kind of holster that you may interested in, but don’t know where to start. Call or message, or text. 706-264-3048. Thanks Greg Carter

Good evening everyone. I hope everyone is doing well. Here are a few things I’m working on  . The first three photos are...
03/23/2023

Good evening everyone. I hope everyone is doing well.
Here are a few things I’m working on . The first three photos are are a G Code dropleg in Multicam. Thanks is a G***k 19. These seem to be really popular right. I can see why. They are simple, but good quality, for sure. You can change out one holster for another in a manner of a few seconds.
The third one is mounted to your belt with two overhooks.
I wanted to show you the fourth photo of something else that I will be making in a few days. This is a G Code system that attaches right kind of over the belt area. You can adjust this one up to 30 degrees forward cant or reverse cant. To be able to adjust it exactly like you want makes this kind of setup veryvaluable, especially to gun competitions. Give me a call or text at 706-264-2048.
Don’t forget that we try to make for what our customers want. If it is not right I want let it go out.
Thank you for your business. I appreciate everyone!!

Greg Carter

I’m working on a few different holsters. The first two are of a CZ75 with threaded barrel. Customer is going with the G ...
03/07/2023

I’m working on a few different holsters. The first two are of a CZ75 with threaded barrel. Customer is going with the G Code System. What makes it great, is that you buy just one setup and you can add other holsters with a metal hanger that with the wheel locks it into place. You can easily change out holsters without investing for a whole new setup for each additional holster. Please call for details.
There are also other systems we can use if you would like. I am more than happy to give you all the information so that you can make an informed decision.
I also finished up a G***k and Kimber 1911 for an officer for Murray County Ga Sheriffs Department officer. I appreciate all our first responders who are not appreciated enough in my opinion. My son was a deputy sheriff canine handler for seven years and he was a way better man after being one.
As usual I have said to much, but I’m paying Facebook for it, so I guess it’s ok, Lol!!!
Call me or message me, I will be glad to help you.

Greg

Address

1883 Renfroe Road NE
Dalton, GA
30721

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm
Saturday 9am - 5pm

Telephone

+17062642048

Website

Alerts

Be the first to know and let us send you an email when Dalton Custom Kydex Holsters posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Dalton Custom Kydex Holsters:

Share