KnivesByDon

KnivesByDon Custom knife maker of Hunting, Bushcraft, Kitchen and EDC knives. Make sure you "Like" this page to stay updated on my latest work and giveaways!

Also specialize in custom leather work for the outdooorsman.

It's no secret I love leather for sheaths. But I also use kydex from time to time. In generaly, I'd have to agree with B...
05/22/2017

It's no secret I love leather for sheaths. But I also use kydex from time to time. In generaly, I'd have to agree with Bobby's mama ;)

Spent the day yesterday at Master Bladesmith Ray Kirk's place during the Knife Group Association of Oklahoma's spring ge...
05/08/2016

Spent the day yesterday at Master Bladesmith Ray Kirk's place during the Knife Group Association of Oklahoma's spring get-together. Had a fun time and picked up some useful tips. I had never witnessed an ABS test. Watched two knife makers pass their test! It was awesome! It may have even inspired me to make some time to get back to knife making! ;)

I know, I know. It's been a while since I posted. Heck, it's been since Sept. since I finished a knife. I've been so bus...
01/07/2016

I know, I know. It's been a while since I posted. Heck, it's been since Sept. since I finished a knife. I've been so busy with other things. Can't believe it's been that long since I finished my first slipjoint.

UPDATE: I have a love/hate relationship with 01 Tool Steel. It's what I made the blue slippie out of. It rusts if not taken care of. Even the slightest amount of moisture makes it start turning. That's the con. But the pro is that it's tough! I've used and abused (just mildly ;) ) this knife. It has taken everything I've thrown at it. Here's my latest pictures of it. I was cleaning some very old, and very hard caulk off of a tub. The stuff was harder than the grout! I wanted to see if the tip would hold up. I figured it would. I have cut a ton of other stuff with this knife since finishing it. The tip is still intact and all that nasty caulk and grout is gone!

Well, after several tries, I finally produced my first functioning slipjoint! (pocket knife for you non-knife heads :) )...
09/11/2015

Well, after several tries, I finally produced my first functioning slipjoint! (pocket knife for you non-knife heads :) ) This turned out to be one of the most frustrating things I've done knife wise! But I'm glad it's finished. The next ones should go a little smoother...I hope! G10 linerless handles. 3/32" 01 Tool Steel for blade and spring. It had a neat snap before I peened the pins, guess I over did it because now it closes stiff. I'll do some adjustments on that later to see if I can get it loosened up.

Well, the weather cooled off for a few days and allowed me to get this Tanto/Necker finished. 01 steel, 1/8", 2 5/8" fro...
08/16/2015

Well, the weather cooled off for a few days and allowed me to get this Tanto/Necker finished. 01 steel, 1/8", 2 5/8" from tip to handle, 6" overall, Blue G10 handles. I used FC acid and Vinegar to etch the blade. I think it looks really cool. Sorta has a tough look to it. Comes with Kydex neck sheath. FB price is $65. Price includes Free USPS Priority Shipping. Paypal preferred.

Putting this Santoku back up for sale. I've been using it on Wed. nights when I cook at church and it has performed beyo...
07/20/2015

Putting this Santoku back up for sale. I've been using it on Wed. nights when I cook at church and it has performed beyond my expectations! Blade has a beautiful patina. I can hand sand it back to a bright finish or you can keep the patina as it is, totally up to the new owner. It's .084 52100 steel. Thin and SHARP! Beautiful Desert Ironwood handles. Price = $150. Paypal or USPS Money Order only.

I felt like someone was watching me as I made this knife. Then I realized it must be all these crazy eyes on this Bocote...
06/12/2015

I felt like someone was watching me as I made this knife. Then I realized it must be all these crazy eyes on this Bocote! At one time before I started sanding, I counted 7 eyes on the left side!

I just finished it up this evening. I wanted to get some pics before it got dark. I still need to etch my makers mark and put an edge on it. I'll do them later tonight then she'll be ready to head for a new home!

Specs:

Steel: ⅛" 01 Tool Steel
Blade: 2¾" from tip to scales with a 2¼" edge. Flats cold blued
Handles: Craziest Bocote I've ever used! Stainless pins
Blade Height: 1⅜" at heel
OAL: 6"

Will come with a black Kydex sheath designed to be worn around the neck on a lanyard (not included) or as a EDC inside the pocket.

Price: $70
Includes FREE USPS Priority shipping in the ConUS.

Another necker/edc. This one is made from ⅛" 01 tool steel. It holds an azing edge!Price: $65 with Kydex sheath or $60 w...
06/11/2015

Another necker/edc. This one is made from ⅛" 01 tool steel. It holds an azing edge!

Price: $65 with Kydex sheath or $60 without.

Here is my latest knife. It's a little neck knife that can also be worn as an EDC. It is made from 1075 high carbon stee...
06/07/2015

Here is my latest knife. It's a little neck knife that can also be worn as an EDC. It is made from 1075 high carbon steel. Blade is 3¼" from tip to handles with a 2½" cutting edge. Handles are Blue G10 with stainless steel hardware. Flats have been cold blued. Comes with a Kydex sheath.

Price: $65. Includes free USPS Priority shipping in the ConUS. Message me for my Paypal address if interested.

5 1/2" Santoku made from 3/32" 52100 steel. Ground very thin. The whole knife is light. Handles are some highly figured ...
06/05/2015

5 1/2" Santoku made from 3/32" 52100 steel. Ground very thin. The whole knife is light. Handles are some highly figured Desert Ironwood. The camera (cell phone) can not capture how awesome these handles are!

As most of you know, 52100 is an excellent steel for knives. Originally designed as ball bearing steel, it is very tough and holds a very keen edge.

Spine and choil have been rounded for comfort while using.

I'm going to discount this one a little because my plunge lines are slightly off from one another. You probably wouldn't see it unless you were looking for it, but I know it's there.

Price is $150. Includes free USPS Priority shipping. Paypal or USPS Money Order.

I wish this cell phone would pick up the brilliance of this Desert Ironwood handle on this Santoku knife. It's going to ...
06/04/2015

I wish this cell phone would pick up the brilliance of this Desert Ironwood handle on this Santoku knife. It's going to be awesome?

These are the two I had on the bench when my home flooded. I made them as paring knives but the white one would make a g...
05/30/2015

These are the two I had on the bench when my home flooded. I made them as paring knives but the white one would make a great bird and trout night because it has some flex in the blade. Both are very 3/32nd 52100 high carbon steel.

Address

Coweta, OK
74429

Website

Alerts

Be the first to know and let us send you an email when KnivesByDon posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category