GSD Custom Cycles

Call Contact the business

GSD Custom Cycles Choppers and chopper parts. That means rigid frames, rake and stretch. No baggers or suspensions. Ever. Period.

Rough welding done, I'll shorten up the grip ends when I put the brake, throttle and clutch on. Boy knows what he's doin...
10/31/2026

Rough welding done, I'll shorten up the grip ends when I put the brake, throttle and clutch on. Boy knows what he's doing.

This bike my brother Iain and I started a while ago but did not finish because the opportunity to ride in Europe came up...
10/30/2026

This bike my brother Iain and I started a while ago but did not finish because the opportunity to ride in Europe came up a few different times and interrupted the project. I'm going to finish it this winter unless something big comes up in the meantime.

An old trick from the 70s for making handlebars without a welding fixture being used. Turn the bars around in the triple...
10/30/2026

An old trick from the 70s for making handlebars without a welding fixture being used. Turn the bars around in the triple tree and lay them on a flat surface. If they do not rock back and forth then the bars are evenly bent and cut. If one is shorter than the other, the assembly will rock back and forth like a table with a short leg.

Stainless 1" handlebars. Top photo shows how the bars will eventually parallel the top of the tank. I'm going with tille...
10/29/2026

Stainless 1" handlebars. Top photo shows how the bars will eventually parallel the top of the tank. I'm going with tiller bars; they're easy to reach and give the rider good leverage. Look cool to us old gits as well.

This is what happens when an axle seizes to a sealed bearing. Had to cut it in two places to get it out of the frame.
10/29/2026

This is what happens when an axle seizes to a sealed bearing. Had to cut it in two places to get it out of the frame.

Back end done and dusted. Chain clearance less than 1/4".
10/01/2026

Back end done and dusted. Chain clearance less than 1/4".

One fun bike. Worth the $1500.
09/10/2026

One fun bike. Worth the $1500.

Getting crowded in here. Back from Oregon and Washington and home for a while. Plenty of sh*te to do.
09/10/2026

Getting crowded in here. Back from Oregon and Washington and home for a while. Plenty of sh*te to do.

Last pix before heading out. It's a great life.
07/13/2026

Last pix before heading out. It's a great life.

07/12/2026

Heading over to Scandinavia to ride motorcycles. Will be back end of the month.

Address

Charlotte, NC

Opening Hours

Monday 8am - 6pm
Tuesday 7am - 7pm
Wednesday 8am - 6pm
Friday 8am - 6pm
Saturday 8am - 6pm

Telephone

+17049578644

Website

Alerts

Be the first to know and let us send you an email when GSD Custom Cycles posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to GSD Custom Cycles:

Shortcuts

Share

Other Charlotte gyms & sports facilities

Show All