Outlaw Blades

08/31/2017

Mini Cleaver

08/30/2017

Cleaver Fever

05/02/2017

Blade made from 1/4 inch thick 4 grit wood rasp, bevelled and hand sanded to 2000 grit, then polished on the buffing wheel. Scales made from fractal wood burned hickory reinforced by fiberglass resin. Hand sewn black leather side carry sheath with orange stitching.

04/25/2017

This one is for a customer who's husband collects knives. Made from a large 4 grit wood rasp. Blade hand sanded to 1500 grit and polished on the buffing wheel with Jewelers rouge. Fractal wood burned scale reinforced with fiberglass resin.

03/23/2017

Created for a dear friend, this Rasp had been used by her father and she honored me with having me create this Bowie Knife. The overall knife length was about 13 inches. The handle scales I created by using a technique known as Fractal Burning and uses high voltages of electricity that is passed through the wood to create a lightening pattern. If you want to learn more about Fractal Wood Burning you can Google Lichtenberg Art.

01/30/2017

These two knives were both cut from a 12 inch half round file. Immediately when a good friend gave it to me it just felt like a blade that shoukd be chisel ground. The krux of this grind is basically a one sided grind, leaving more steel on the blade resulting in increased durability. Of course also being constructed from a file which inherently is a high carbon steele, so they will also hold an edge very well. You see a lot of chisel ground knives that are squared off like one of these and the other is just my own creation. The top edge is ground to a sharp point for stabbing motion but is ground only as a swedge to keep it a legal carry. As with everything on the site they are for sale with no listed price just on a make an offer basis only.

01/12/2017

11/07/2016

A couple of the more crazy ones. I need to make another hand Axe because you need one for each hand

11/07/2016

Made from a large file

11/07/2016

Made from a large wood rasp