Custom Long Range Repair and Machine

Custom Long Range Repair and Machine Custom Repairs & Other Custom Fabrications. Full Metal Machine Shop and Oven Curing Annealing and tempering Parts. Springs Made and Parts Machined.

08/30/2019

Sorry fir not being available. I am still recovering from Transplant surgery and will be out for some time longer. If you don’t mind waiting, you can go by after 11:00am and drop it off with my partner. He can explain more about how long you’ll have to wait to allow me to get the work done. Thank you for your understanding. I’ll be here for another week and then back in Asheville to finish my recovery.

AR build, getting it ready to take out a few Ground Hogs. That’s a five round grouping. Now he can adjust the scope.
05/07/2019

AR build, getting it ready to take out a few Ground Hogs. That’s a five round grouping. Now he can adjust the scope.

To go along with the video of Josh Whitted’s video of his new .45 cal Smokeless ML, I am adding a picture of the group h...
03/27/2019

To go along with the video of Josh Whitted’s video of his new .45 cal Smokeless ML, I am adding a picture of the group he shot as his first firing of the rifle. The shot to the right was a fouling shot. The three touching rounds measured Sub-MOA @ 960”. Remember, that isn’t the final load. It was his first and not knowing what the rifle wants. I expect it to get a lot better. This gun is effective out to, at the very least, 600 yds. With 1,000yds. being possible. 1st shot-fouling shot.
2nd-4th-measures .960” all touching.
I will post another target once he has worked up the best load.

03/27/2019

This is my customer Josh Whitted firing for the first time of the Smokeless Muzzleloader I had built for him. It sounds by the video and after talking with him that he is very pleased with it. All three rounds after he got the scope close were touching and that was the first load he has tried in it. I think that after he finds the perfect load that all three rounds will be in the same hole. It’s a .45 caliber ML.

Check out the video below.

03/05/2019

Hello all, of you all do not mind to do it, could you please write a note and share it with your friends list. Also like and Share any experiences you might have had of all the things you like about my page. I really would appreciate it. I’m trying to get some work done and saved while I can before I have my Liver Transplant. It would help greatly.

01/31/2019

We are starting to offer Smokeless powder Custom MUZZLELOADERS!! Most states allow the use of modern Smokeless Powder instead of Pyrodex or Blackpowder. You still load it like a traditional Muzzleloader with the powder being the only difference. The Muzzleloader has to be built to withstand the increased pressures from modern powders. Not any Muzzleloader can handle this.

We are currently offering them on Re*****on Model 700 actions and The Thompson Encore systems. I can build the gun on your actions or mine. Turn around time depends on how long it takes to get the barrel made and delivered.

These guns will be capable of shooting to 1000 yards or any range you feel comfortable shooting to 1,000 yards.

Call today to get your build started. Don’t wait until Muzzleloader season gets here then order it because it will be the next season before you will be able to hunt with it.

Basic Models using my Actions start at $2500, and can go up depending on extra options. All work is guaranteed and will shoot 1 MOA or less. Gun’s are built in .45 & .50 calibers. I also build Custom Modern Rifles as well. Guaranteed 1/2 MOA or less in any Caliber that currently has a Chamber Reamer For. Custom Modern Rifles Basic Models Start at $3000 and go up depending on selected options.

Call Today (828)275-0551. If no answer please leave a message.

01/31/2019

Full service Gun Shop with Custom Long Range Rifles Built!!

01/19/2019

We are still providing Cerakote finishes for those that have rust pitting, and just because that’s what you want. We even do Camo Patterns, hot pink, purple, Zombie Green, international Orange and about 250 other available colors. We paint fi****ms, suppressors, back packs, tumbler Yeti Cups, ballistic helmets, and pretty much anything you want Cerakoted. We provide Custom engraving for barrel marking, putting your name on the gun, putting a logo on the firearm. We offer Hot bluing, rust bluing, and even cold bluing although cold bluing is not very durable. We offer color case hardening for old levergun, Low walls, high walls, and pistol frames. We will even do slides for the 1911 pistol. Check us out today for some guaranteed custom Gunsmithing work.

01/19/2019

Just wanted to say that this is the time to get that needed work done while the season is over. You surly don’t want to deal with it next season. Call to day with your concerns. All work is 100% Guaranteed. Also, turnaround time is at its shortest right now. Custom builds usually take 8 months to a year but right now it’s between 6-8 months. Also building Custom MUZZLELOADERS Shooting Smokeless Powder in .45 cal. Some of the best and most accurate smokeless ML on the market. Average velocities are 3200 FPS. 30” custom Stainless Steel Schneider Rifle Barrels. Bell & Carlson Varmint/Tactical stock with full bed Aluminum bedding block for accuracy. Your choice of triggers. Add $200 for Jewel Triggers. Drilled and tapped for scope. Can build it on Re*****on, Savage, and Encore actions. Encore barrels are 24”.

Call today or message me with your preferences for a quote. Each rifle is built to order. All actions are blueprinted. Optics are extra. Free mounting and zeroing of optics. You will receive a worked up load to include the bullet type when you get the rifle. So all you have to do is mount your optics if you don’t want me to put a scope on it or if you do, just load the gun per instructions and shoot at your target to get familiarized with it. Next ML season or all deer season you know what the rifle will do. 4” groups out to 500 yds. With the bullet speeds, you can shoot the gun all season. Almost forgot, we offer a complete matching service for re-barrel Jobs, muzzle Brake installs, re-Crowning Jobs threading Barrel to install in action, and chambering. Custom Long Range Rifles(our to 1,000 yds and beyond) start out at $2500. Price is dependent on options installed, and Custom Actions Used. Can be Re*****on, Savage, Wi******er, stillest, BAT, Kelby, PTG and others on the market. Calibers built start in the .223- all the way up to .50 Cal. and everything in between.
There are other things we do that I’m sure I’m leaving out. If you need something, ask me. I’m sure we do it.

Striving to be the best Custom Shop in Asheville, NC

COME BE A PART OF IT.

Bows the time to treat yourself.

Midan Gunsmithing.

11/24/2018

Now until December 20th, we are offering a 10% Discount on all Cerakote Paint Jobs. You’ll need to get them in quick because this may cause a high turnout and there will be at least a 2 week turnaround time for your item. So, if you want to have your things back before Christmas, you will need to get them in soon. Call (828) 275-0551 to schedule a drop off. If no answer, that means we are busy working on other customers items. Please leave a message with your name, call back number, the item you want done, and when you would be free to drop it off. Please try to list a couple times or the times you are free so we can set up a time. Be thinking of what Cerakote job you want and what colors so we can discuss it.

Thank you.
Like us on Facebook and share to get an extra 5% off.

Address

Asheville, NC
28804

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 12pm

Telephone

+18282750551

Website

Alerts

Be the first to know and let us send you an email when Custom Long Range Repair and Machine posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category