Industry Nine

Industry Nine Precision cycling components for mountain, road and gravel bikes. Handmade in Asheville, NC, USA.
(502)

BTS from ’s time in the desert.Utah is the proving grounds when it comes to freeride. After his last trip in 2019 was un...
06/09/2026

BTS from ’s time in the desert.

Utah is the proving grounds when it comes to freeride. After his last trip in 2019 was unexpectedly cut short, we’re stoked to see him back in the zone, stomping some huge hits, and putting a fresh set of Grade 300 wheels through their paces.

“No Man’s Land” is live now and well worth a watch. Tap the link in our bio to check it out.

Speed comes naturally to this combo!Whisp Carbon are on another level! Lightweight and efficient on the way up, stable a...
06/08/2026

Speed comes naturally to this combo!

Whisp Carbon are on another level! Lightweight and efficient on the way up, stable and confident when you point them downhill. Paired with our SOLiX hub platform that features 605 points of engagement, not a single watt will ever go to waste.

Discover Whisp Carbon: https://industrynine.com/collections/whisp-cross-country-wheels

06/04/2026

for rampage!

Rampage 2019 was the last time Johnny was in Virgin, Utah. That year, things didn’t quite go to plan with a crash in practice. Not one to back down, Johnny headed back for redemption.

“I went back to Utah with a mission; to perform like I know I can, and to push my riding to the level I want. Mission accomplished, this last trip to Virgin was one for the books.”

There ain’t no place like Utah.

Tap the link in our bio to watch “No Mans Land” now.

DARK MATERIALS // UNBOUND 2026The ability to iterate quickly and some tough as nails Dark Materials test pilots. UNBOUND...
06/02/2026

DARK MATERIALS // UNBOUND 2026

The ability to iterate quickly and some tough as nails Dark Materials test pilots.

UNBOUND delivered some of the harshest conditions imaginable to put our 32” & 700c WideAero Gravel prototypes through their paces.

Long miles, sharp rock, deep mud, deeper water, crosswinds, thunderstorms and brutally thick air.

A top ten. An unfortunate DNF (due to a cut tire). A covert rider ending up on the top step in XL. And the feedback needed to turn the k***s, test more, iterate more and dial it all in.

This is what goes into producing the best version possible.

The Queen of Unbound XL. pushed through 356 miles of wind, rain, lighting, and endless stretches of mud to regain her c...
06/01/2026

The Queen of Unbound XL. pushed through 356 miles of wind, rain, lighting, and endless stretches of mud to regain her crown. After battling the relentless conditions for 27:11:32, Svenja rolled across the finish line a champion.

Congrats !

We are proud to see our AR40s along for your adventure and honored to be a small part of such a remarkable victory.

’s ACE build for the Traka 360 was something else!The Traka 360 is a monster! It’s long, it’s rough, and it’s fast. As ...
05/26/2026

’s ACE build for the Traka 360 was something else!

The Traka 360 is a monster! It’s long, it’s rough, and it’s fast. As one of the fastest disc-specific rims available, there was no doubt that the SOLiX SL AR40c’s were the tools for the job.

After 360km of racing, Ben put in a huge effort to claim 4th place in a sprint finish. Congrats, Ben, we’re still in awe of that sprint finish.

Our man has just built himself a fresh gravel machine.It's a build that's been on the cards for a while for Dillon, but...
05/19/2026

Our man has just built himself a fresh gravel machine.

It's a build that's been on the cards for a while for Dillon, but it's finally come together. With a Rover as the foundation, it's rolling on a set of SOLiX SL AR40c wheels among a host of other top-of-the-line bits.

Perfect build up for those days where dirt, gravel and pavement are all on the plate.

Earlier this week, we had the powerhouse man from New Zealand, , stop by to get a first-hand look at how we do things he...
05/15/2026

Earlier this week, we had the powerhouse man from New Zealand, , stop by to get a first-hand look at how we do things here in Asheville.

We talked development, got some key insights and feedback from Cam, and toured everything from the machine shop to anodizing to the final build stations, where each and every wheel comes together.

Cheers for the visit Cam!

Address

150 Westside Drive
Asheville, NC
28806

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Industry Nine posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Industry Nine:

Shortcuts

Share

Category