Liquid Concepts - Hydrographics Supplies

Call Directions Website

Liquid Concepts - Hydrographics Supplies Quality Hydrographic Equipment, Training, and Supplies!

Hydrographics question of the week. 💧If you had to use **ONE type of pattern for the rest of the year**, what would you ...
11/09/2026

Hydrographics question of the week. 💧

If you had to use **ONE type of pattern for the rest of the year**, what would you choose?

A. Camo
B. Carbon Fiber
C. Woodgrain
D. Skulls / Graphics
E. Flames
F. Custom Designs

No mixing it up — you have to pick just one. 😅

What are you choosing?

**Fact of the Day:** Hydrographic film has a right side and a wrong side.Before placing your film on the water, make sur...
11/06/2026

**Fact of the Day:** Hydrographic film has a right side and a wrong side.

Before placing your film on the water, make sure the correct side is facing down. If the film is laid upside down, it may not hydrate or activate properly and can ruin the dip before you even get started.

A quick way to check is to lightly wet your fingers and pinch a corner of the film. The side that sticks to your finger is the side that should face the water.

It’s a simple check that can save you a lot of frustration.

11/06/2026

⚠️ Quick Update ⚠️

We currently have no power or phone service here at LC.

If you’ve been trying to call, we apologize for the inconvenience. We’ll be back up and running as soon as service is restored.

Thanks for your patience!

Think your coating is only as good as the paint you use? Think again!👀In this week’s video, Bryan talks about why a sand...
11/05/2026

Think your coating is only as good as the paint you use? Think again!👀

In this week’s video, Bryan talks about why a sandblaster is one of the most valuable tools** you can have in your custom coatings shop.

From removing old finishes to creating a clean, consistent surface for better adhesion, proper blasting can make a huge difference in the final result.

Whether you're just getting started or looking to improve your process, this is a video worth watching!

Great finishes start with great prep!💧

Check out this week's video and see why a sandblaster might be one of the best additions to your shop.

Bryan from Liquid Concepts showing you the best tips and tricks for...

You can spend months trying to figure hydrographics out through trial and error — or you can shorten the learning curve....
11/04/2026

You can spend months trying to figure hydrographics out through trial and error — or you can shorten the learning curve. 💧

Our hands-on in-person training is designed to help you understand the process, recognize problems sooner, and build confidence in what you’re doing.

From prep and film setup to activator, dipping, rinsing, clear coat, and troubleshooting, we walk through the process with you so you can better understand not just what to do, but why it works.

And right now, our in-person hydrographic training is **15% OFF for a limited time.**

If you’ve been thinking about getting started or taking your current results to the next level, this is a great time to book.

**Learn faster. Waste less. Dip with confidence.**

Book your training at https://liquidconcepts.com/hydrographics-training/

Rich, deep, and full of character — Dark Walnut Burl brings a bold woodgrain look with darker tones and natural burl mov...
11/03/2026

Rich, deep, and full of character — Dark Walnut Burl brings a bold woodgrain look with darker tones and natural burl movement that really stands out. It’s a great choice when you want a finish that feels classic, detailed, and high-end.

This pattern works great on projects where you want a warm wood look with a little more depth and drama.

https://liquidconcepts.com/product/dark-walnut-burl/

What would you dip in this pattern? 👇

Hydrographics check-in 💧What’s your biggest challenge in hydrographics right now?Is it activator control, film stretch, ...
11/02/2026

Hydrographics check-in 💧

What’s your biggest challenge in hydrographics right now?

Is it activator control, film stretch, prep, clear coat, troubleshooting, consistency — or something completely different?

Drop it in the comments. We’d love to hear what everyone is running into, and your answers may help shape future tips, videos, and training topics.

**Friday Fact of the Day:** Hydrographic film can keep expanding after it hits the water.Once the film starts hydrating,...
10/30/2026

**Friday Fact of the Day:** Hydrographic film can keep expanding after it hits the water.

Once the film starts hydrating, it begins to relax and spread. If it sits too long before activation, the pattern can become stretched or distorted before the dip even starts.

That’s why timing matters just as much as temperature and activator.

Watch your film, learn how it behaves, and dip when it’s ready — not just when the timer says so.

Wood grain can look great on interior parts — but getting it to look right takes a little planning. 👀In this week’s vide...
10/29/2026

Wood grain can look great on interior parts — but getting it to look right takes a little planning. 👀

In this week’s video, Bryan talks through some of the important things to consider when dipping wood grain, including:

• How the grain should flow across multiple parts
• Why orientation matters before you ever make the dip
• Choosing the right base color for the look you want
• How to keep the finished pieces looking consistent as a set

If you’re working with dash pieces, trim panels, consoles, or other interior parts, this is a helpful video to watch before you start laying out your film.

A little planning up front can make a big difference in the final result. 💧

Bryan from Liquid Concepts showing you the best tips and tricks for...

Sometimes customers know exactly what they want. Sometimes they just need help seeing the possibilities. 💧Showing differ...
10/28/2026

Sometimes customers know exactly what they want. Sometimes they just need help seeing the possibilities. 💧

Showing different films, finishes, colors, and styles can make it easier for them to picture the final result and feel confident moving forward with the project.

The more options you can offer, the more opportunities you have to turn an idea into a job.

Show the options. Build confidence. Win more projects.

Browse films and supplies at LiquidConcepts.com

Address

Alexander, AR

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 3pm

Telephone

(501) 455-5500

Alerts

Be the first to know and let us send you an email when Liquid Concepts - Hydrographics Supplies posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby gyms & sports facilities