Dima Rifle Systems LLC

04/06/2026

Every rear bag in this photo is going to a different shooter.

Different colour, different ear height, different fill weight, different discipline. Black/Black for the F-TR shooter who wants nothing that draws attention on the prone line. Black/Red for the one who doesn't mind standing out. Orange, blue, grey — every combination a deliberate choice.

DimaRS rear bags are built entirely to your specification. Model, ear height, fill weight, colour, base type — nothing is fixed until you say so.

→ Models: High · High+ · Ultra High · Medium · Angled · BR Benchrest
→ Ear heights: 14mm to 28mm
→ Disciplines: F-Open · F-TR · ELR · BR · TR · PRS-H
→ Lead time: 4–6 weeks

DM or email [email protected] — dimars.com.ua

Which colour are you drawn to?

02/06/2026

Ten boxes going out this week.

Each one has a bag inside built for a specific shooter — their model, their ear height, their colour, their fill spec. We placed one on top for the photo. Then it went back in the box with the rest.

This is what moving through the queue looks like. We don't announce batch runs or limited releases. We build, pack, and ship — in order, at the same quality every time, to wherever in the world the order came from.

→ Lead time: 4–6 weeks from confirmation
→ DM or email to get in the queue: [email protected] — dimars.com.ua

Where in the world is this week's batch going?

31/05/2026

Fifteen bags on the table this week.

Each one has an order number, a name, and a specification attached before it goes in the box. Different ear heights, different fills, a few in colour combinations we don't see in every run. Every single one built the same way, by the same hands, to the same standard.

We don't run production lines here. When the workshop looks like this, it means the queue is full and we're working through it. That's the version of a good problem we'll take every time.

→ Lead time: 4–6 weeks from order confirmation
→ Every bag: your model, ear height, fill weight, colour, and base
→ DM or email to start: [email protected] — dimars.com.ua

What's on the bench at your range right now?

29/05/2026

Red leather over a laminated wood base. That's the whole visual.

You can see the individual wood layers from every angle — the base is cut and shaped by hand, not moulded. Full red leather body, dual ears, the DimaRS emboss pressed into the rear panel. A level disc sits at the front of the base. Everything you see is leather, wood, and stitching.

No filler materials. No shortcuts.

→ Full leather body, dual ears
→ Laminated wood base — grain and layering visible in every photo
→ Colour shown: Red
→ Lead time: 4–6 weeks

Other colours available. DM or email [email protected] — dimars.com.ua

What's behind your stock right now?

27/05/2026

This kind of message makes the whole thing worth it.

Craig reached out this week to say he's been shooting with his team and that working with the stock has been a genuine pleasure. Simple as that. No need to add anything to it.

Thank you, Craig — messages like this remind us exactly why we build the way we do.

If you're running DimaRS gear and want to share how it's going, our inbox is always open.

dimars.com.ua | [email protected]

24/05/2026

The stripe isn't decoration. It's structure.

Four species, pressed and glued under load, then machined as a single block. Curly Maple carries the outer layers — tight wave figure that opens up under oil. Padauk runs through the centre in orange-red, which deepens to dark brick after finishing. Wenge locks the contrast with near-black grain. Maple ties the centre together.

Every layer runs the full length. Every cut reveals all four. This is how laminate works — not pattern, but composition.

→ F-Open geometry
→ Flat-bottom forend, 75mm
→ Adjustable rear rail hardware
→ Built-in level
→ Inlet to your action

We build any combination to your spec. DM or email [email protected] — dimars.com.ua

Curly Maple outer or Wenge outer — which would you choose?

22/05/2026

They're all leaving the workshop this week.

Five rear bags. Five colour choices. One geometry — flat bottom, adjustable ears, built-in bubble level, suede base that grips the mat.

The ears are what most people ask about. They're not fixed — height adjusts, which means the same bag works behind a lighter load and a heavier one without repositioning your hand. The level vial sits where you can see it without lifting your head.

→ Medium height ears (standard or high)
→ Suede base — grips any mat surface
→ Built-in level vial
→ Blue · Grey · Red · Black · Two-tone available

We build any colour to your spec. DM or email [email protected] — dimars.com.ua

Which colour is already on your mat?

17/05/2026

One wood. That's the whole story.

Competition rifle shooting runs on decisions — action, barrel, scope, position. The stock is the last one most people make and the one that has to work with all the others. This is walnut: European hardwood, straight grain, warm finish, competition geometry. No resin, no laminate, no mixed species. Just the wood.

The grain pattern in this blank doesn't appear in the next one. That's not marketing — that's how timber works.

We build any combination to your spec. DM or email [email protected] — dimars.com.ua

Oil or varnish finish — which do you prefer?

17/05/2026

12/05/2026

Two days of everything Diggle could deliver — confusing winds, sudden heavy showers, and the kind of long-range pressure that makes every point count.

GBFCA 2026 Round 2, The Diggle Long Range F-Class Challenge. F-Open results:

→ 1st — David Rollafson (355.24)
→ 3rd — Tom Reynolds (352.25)

Both compete on DimaRS stocks. Watching from the sidelines, it is genuinely a pleasure — and it means a great deal to us when shooters performing at this level choose our work.

Congratulations to David, Tom, and everyone who took to the firing line at Diggle this weekend.

If you're building your setup — DM or email [email protected] — dimars.com.ua

Who else was at Diggle?