AIMS AIMS is an Autodesk Authorized Training Center, and is the only fully local 3D Laser Imaging Company in Trinidad and Tobago.

3D Laser Scanning in Trinidad and Tobago is now available from Advanced Intelligent Modelling Solutions Limited. AIMS is currently the only fully local 3D Laser Imaging Company based in Trinidad and Tobago. An Autodesk Training Center, AIMS also provides Training for Autodesk products including AutoCAD, Revit, 3ds Max and Civil 3D, and well as other training including CadWorx Plant Professional, CadWorx P&ID and Caesar Pipe Stress Analysis.

18/03/2020

Dear Students,

In light of COVID-19 pandemic and the unsure nature of the re-opening of schools in Trinidad and Tobago, AIMS is temporarily suspending all courses until further notice. Registration for new students will not be accepted during this period.

Please stay safe in this unsure time.

Advanced Intelligent Modeling Solutions (AIMS)

Next cycle of classes begins March 31st! AutoCAD 2D Modelling (Levels 1 & 2) MONDAYS AND WEDNESDAYS April 1st - May 13th...
13/03/2020

Next cycle of classes begins March 31st!

AutoCAD 2D Modelling (Levels 1 & 2)

MONDAYS AND WEDNESDAYS
April 1st - May 13th
5:00pm-8:00pm

SATURDAYS
April 4th - May 9th
9:00-3:00pm

Autodesk Revit Architecture
TUESDAYS AND THURSDAYS
March 31st - May 7th
5:00pm-8:00pm

Send us a message or give us a call! 377-2467

13/03/2020

Dear students, please be advised that our Training Center will be closed until Saturday 21st March as mandated by the Government.

Ready, set, GO! Autodesk Training at AIMS kicks off Feb 1st! SATURDAYSAutoCAD 2D Modelling (Levels 1 & 2) February 1st -...
22/01/2020

Ready, set, GO!

Autodesk Training at AIMS kicks off Feb 1st!

SATURDAYS
AutoCAD 2D Modelling (Levels 1 & 2)
February 1st - March 14th
9:00-3:00pm

MONDAYS AND WEDNESDAYS
AutoCAD 3D Modelling (Level 3) with Fusion 360
Feb 4th - March 16th
5:00pm-8:00pm

TUESDAYS AND THURSDAYS
Autodesk Revit Architecture
February 3rd -March 17th
5:00pm-8:00pm

Send us a message or give us a call! 377-2467

Last chance for 2019 Autodesk courses! AutoCAD (2D Modelling - Levels 1 & 2)Mon/Wed/SatNov 25th - Dec 21stRevit (Revit A...
31/10/2019

Last chance for 2019 Autodesk courses!

AutoCAD (2D Modelling - Levels 1 & 2)
Mon/Wed/Sat
Nov 25th - Dec 21st

Revit (Revit Architecture)
Tues/Thurs/Sat
Nov 26th - Dec 21st

Send us a message or give us a call at 377-2467.

AIMS is an Autodesk Authorized Training Center.

Our 2nd-to-last cycle for 2019 starts October 12th! Secure your seat by sending a message or giving us a call at 377-246...
25/09/2019

Our 2nd-to-last cycle for 2019 starts October 12th!

Secure your seat by sending a message or giving us a call at 377-2467.

Autodesk Revit Architecture
Oct 19th-Nov 23rd (Saturdays)

AutoCAD Levels 1&2 (2D Modeling)
Oct 14th-Nov 20th (Mondays and Wednesdays)

AutoCAD 3D/Fusion 360 (last for the year)
Oct 15th-Nov 21st (Tuesdays and Thursdays)

Did you know? Our next cycle of classes starts in one week! Send us a message or give us a call at 377-2467 for more inf...
26/08/2019

Did you know? Our next cycle of classes starts in one week!

Send us a message or give us a call at 377-2467 for more information.

BACK TO SCHOOL! ...Software Training that is 🙂

AutoCAD Levels 1&2 (2D Modeling)
Marabella
Date: September 7th - October 12 (Saturdays only)
Time: 9:00am-3:00pm
Cost: $3000
Pre-requisite: None

Revit Architecture
Marabella
Date: September 2nd - October 9th (Mondays and Wednesdays)
Time: 5:00pm-8:00pm
Cost: $4000
Pre-requisite: AutoCAD Levels 1&2 (done at any institute)

Kelly Village
Date: September 3rd - October 10th (Tuesdays and Thursdays)
Time: 5:00pm-8:00pm
Cost: $4000
Pre-requisite: AutoCAD Levels 1&2 (done at any institute)

Send us a message or give us a call at 377-2467 for more information!

AIMS is an Autodesk Authorized Training Center.

BACK TO SCHOOL! ...Software Training that is 🙂AutoCAD Levels 1&2 (2D Modeling) MarabellaDate: September 7th - October 12...
08/08/2019

BACK TO SCHOOL! ...Software Training that is 🙂

AutoCAD Levels 1&2 (2D Modeling)
Marabella
Date: September 7th - October 12 (Saturdays only)
Time: 9:00am-3:00pm
Cost: $3000
Pre-requisite: None

Revit Architecture
Marabella
Date: September 2nd - October 9th (Mondays and Wednesdays)
Time: 5:00pm-8:00pm
Cost: $4000
Pre-requisite: AutoCAD Levels 1&2 (done at any institute)

Kelly Village
Date: September 3rd - October 10th (Tuesdays and Thursdays)
Time: 5:00pm-8:00pm
Cost: $4000
Pre-requisite: AutoCAD Levels 1&2 (done at any institute)

Send us a message or give us a call at 377-2467 for more information!

AIMS is an Autodesk Authorized Training Center.

Check out the upcoming class schedule! Send us a message or give us a call at 377-2467 for more information.
19/07/2019

Check out the upcoming class schedule! Send us a message or give us a call at 377-2467 for more information.

Summer time! 🌞

AutoCAD Levels 1&2:
Marabella
July 22nd-August 28th
5:00pm-8:00pm (Mon & Wed)

July 27th-August 31st (Saturdays)
9:00am-3:00pm

Kelly Village
July 23rd-August 29th
5:00pm-8:00pm (Tues & Thurs)
Price: $3000

Look out for another week-long summer CAD in July and August!

Send us a message or give us a call at 377-2467.

Who should take this SUMMER course?- Secondary school students (Form 4+)- In particular, students pursuing Technical Dra...
17/07/2019

Who should take this SUMMER course?

- Secondary school students (Form 4+)
- In particular, students pursuing Technical Drawing or BMED
- Tertiary Level Students (Mechanical, Civil, Electrical Engineering students)
- Any student with interest in Engineering
- Any young person interested in learning how to draw using CAD (Computer-Aided Drawing)

AutoCAD Fundamentals (2D Drawing)
July 29th - August 2nd
Time: 9:00am-3:30pm
Cost: $3000

Send us a message or give us a call at 377-2467.

Summer time! 🌞AutoCAD Levels 1&2:MarabellaJuly 22nd-August 28th5:00pm-8:00pm (Mon & Wed) July 27th-August 31st (Saturday...
17/07/2019

Summer time! 🌞

AutoCAD Levels 1&2:
Marabella
July 22nd-August 28th
5:00pm-8:00pm (Mon & Wed)

July 27th-August 31st (Saturdays)
9:00am-3:00pm

Kelly Village
July 23rd-August 29th
5:00pm-8:00pm (Tues & Thurs)
Price: $3000

Look out for another week-long summer CAD in July and August!

Send us a message or give us a call at 377-2467.

Who should take this SUMMER course?- Secondary school students (Form 4+)- In particular, students pursuing Technical Dra...
11/06/2019

Who should take this SUMMER course?

- Secondary school students (Form 4+)
- In particular, students pursuing Technical Drawing or BMED
- Tertiary Level Students (Mechanical, Civil, Electrical Engineering students)
- Any student with interest in Engineering
- Any young person interested in learning how to draw using CAD (Computer-Aided Drawing)

AutoCAD Fundamentals (2D Drawing)
June 24th - 28th
Time: 9:00am-3:30pm
Cost: $3000

Send us a message or give us a call at 377-2467.

Address

#90 Union Road
Marabella

Opening Hours

Monday 08:00 - 17:00
Tuesday 08:00 - 17:00
Wednesday 08:00 - 17:00
Thursday 08:00 - 17:00
Friday 08:00 - 17:00

Telephone

+18683772467

Alerts

Be the first to know and let us send you an email when AIMS posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to AIMS:

Share