XDEEP Singapore

13/04/2026

13/04/2026

25/09/2025

No additional weight and the same softness at any depth.

3D Mesh padding

Standard backplate padding, made of foam have practically only drawbacks: Already at the depth of more than ten meters they become noticeably thinner and definitely harder, which makes the harness more loose and less comfortable, and they also require additional weight, which adversely affects the diver’s safety.

The revolutionary padding made of 3D Mesh behaves completely different. The softness results from springy fibres inserted in a special manner in the mesh structure. Thanks to such solution the water can easily flow through the mesh, and the pressure does not have any impact on its parameters.

Result? Advantages only: Padding made of 3D Mesh does not compensate under pressure, is equally soft at all times and does not require additional weight. It also dries much faster than the classic foam.

24/09/2025

World’s best inflator for scuba diving BCD.

K-type inflator

K-type inflator used as a standard type of inflators in all our buoyancy compensators is a balanced piston type inflator, which enables precise adding of the gas to the buoyancy compensator.

The body of the inflator is made of POM-H poliacetal of very high mechanical durability and 100% resistance to salt water.The seat of the valve is made of metal and therefore the inflator is definitely more resistant to freezing than other inflators made completely of plastic. All metal parts of the inflator are made of top quality alloys resistant to salt water.

The inflator is equipped with the most popular type of medium pressure hose connection so there are no problems with its incompatibility with the first stage hose. The material retains very high mechanical resistance and flexibility both in low winter temperatures and in tropical heat.

23/09/2025

Polymer of high resistance to cracking. Even in very low temperatures.

Technopolymer stiffener

The stiffeners in the diving gear are subject to significant load and have to last for many years in extreme environment. Due to extreme temperatures and salt water only the best and the most expensive materials are adequately durable and resistant.

In STEALTH 2.0 sidemount system and weight pockets we used high quality polymer stiffener of high resistance to material fatigue.

The applied polymer retains its parameters within a wide scope of temperatures; therefore it can resist both tropical heat and arctic frost.

21/09/2025

Thick bladder coating provides less risk of bladder puncture.

0.215mm coating

To provide water tightness of the bladder in each wing the bladder material is coated with a special outer shell made of thermo-weldable polyurethane, during the production. It enables welding the bladder consisting of two parts and filling it with air.

Its parameters and quality translates directly into your safety and durability of the BCD. We can say with no exaggeration that it is one of the most essential parts of each wing and diving buoy.

In general, in wings and jackets shells of thickness from 0.08 mm to 0.2 mm are applied. In xDEEP buoyancy compensators we use materials coated with as much as 0.215 mm-thick TPU shell. The shells of higher thickness are more resistant to any damage that thinner shells. Consequently, it provides better safety of use.

20/09/2025

Top quality, USA made nylon of weave which guarantees puncture resistance.

Nylon 440 dTEX

Nylon is a polyamide fabric of very high resistance to abrasion, UV radiation and salt water.

The bladders of the wings we produce are made of 440 dTEX fibre thickness nylon and weave which guarantees increased resistance to puncture.

Such thickness of fabric is optimal since thicker fabric would cause definitely worse fit of the dive BCD and thinner one would fail to ensure the required resistance.

For your safety, each batch of the fabric is tested in the laboratory where the fabric durability and resistance to extreme temperatures and salt water is examined.

19/09/2025

Your dive gear will resist more and last longer. Definitely longer.

CORDURA® 1100 dTEX

CORDURA® is a widely known brand of polyamide fabrics of the highest resistance resulting from special weave structure and weaving method. The outer side of CORDURA® fabric is coated with Teflon aperture, which ensures very high resistance to abrasion. The inner side of the CORDURA� fabric we use is coated with a layer of polyurethane.

The XDEEP dive gear are only made of CORDURA®� fabric produced in Germany in compliance with the highest quality standards of INVISTA company.

CORDURA® is a registered trademark of INVISTA company for resistant textile fabrics. More information on CORDURA® fabric can be found on www.cordura.com Teflon® is a registered trademark of E. I. du Pont de Nemours and Company. To get more information on Teflon® product, visit website www.teflon.com.

18/09/2025

Protects the dive equipment against wear through the edge of the backplate.
CNC edge bevelling

The diving gear is rather expensive so it should be constructed so as to last for many years. The diving equipment parts include backplates and single tank adapters made of metal which sharp edges could cause wear through the outer shell of BCD or dry suit.

In XDEEP backplates and adapters all edges are additionally processed which involves cutting the edges at 45 degree angle using a special computer-controlled machine. The special robot precisely grinds all the edges with an accuracy of one hundredth of a millimetre.

17/09/2025

The highest resistance of bladder weld. That’s way we offer lifetime guarantee.
HF welding

Welding is one of the stages in the production of BCDs and diving buoys. In XDEEP we attach a lot of significance to the quality of the said process since durability and weld resistance exert great impact on your safety.

From among several different welding technologies, we have selected HF welding because of very high repeatability of parameters, homogeneity of welds and fully automatic process.

The fabric is inserted between two electrodes and then the computer begins to control the welding process. The electrodes are connected to the source of high-frequency electric power, and a special controller strictly regulates the power and time of welding to obtain the top-quality weld.

Thanks to such advanced technology and top-quality of fabrics used for production, XDEEP scuba gear is provided with lifetime guarantee on all welds.