Knivesmyway

Knivesmyway I love to make knives: handmade, handforged or stock-removal knives for outdoors (bushcraft, hunting

japanese-inspired kitchen short knife (status: SOLD)- rat-tail tang, full flat grind- swedish carbon steel blade (80CrV2...
25/01/2018

japanese-inspired kitchen short knife (status: SOLD)
- rat-tail tang, full flat grind
- swedish carbon steel blade (80CrV2)
- bog oak handle
- rough finish
- I can make a similar one for 145 euro (sheath and shipping not included).

hunting knife (status: SOLD)- full tang, full flat grind- pattern welded carbon steel blade (1095 and 15N20)- camel bone...
04/10/2017

hunting knife (status: SOLD)
- full tang, full flat grind
- pattern welded carbon steel blade (1095 and 15N20)
- camel bone scales
- brass mosaic pins (the most intricate I ever put on a knife) and lanyard tube
- I can make a similar one for 270 euro (sheath and shipping not included).

bushcraft/carving knife (status: SOLD)- rat-tail tang, zero scandi grind- swedish 80CrV2 carbon steel blade- birch bark ...
30/07/2017

bushcraft/carving knife (status: SOLD)
- rat-tail tang, zero scandi grind
- swedish 80CrV2 carbon steel blade
- birch bark handle
- brass bolster & pommel, red & white vulcanized fiber spacers
I can make a similar one for 170 euro (sheath and shipping not included).

"scalping knife" (status: SOLD):- rat-tang- OSC10 (romanian tool steel)- stabilized beech burl- 3 mm thick (tapered towa...
28/05/2017

"scalping knife" (status: SOLD):
- rat-tang
- OSC10 (romanian tool steel)
- stabilized beech burl
- 3 mm thick (tapered towards the tip), 40 mm wide (at its widest), 260 mm total length (blade: 145 mm)
- rough finish
I can make a similar one for 180 euro (shipping not included).

"honeycomb" chef (status: SOLD):- full-tang, full-convex grind- RWL-34 metallurgic powder stainless steel- homemade resi...
23/05/2017

"honeycomb" chef (status: SOLD):
- full-tang, full-convex grind
- RWL-34 metallurgic powder stainless steel
- homemade resin scales
- brass corby rivets
- 2.5 mm thick (tapered towards the tip), 50 mm wide (at its widest), 330 mm total length (220 mm blade, 110 mm handle)
- satin hand-rubbed finish
I can make a similar one for 340 euro (shipping not included).

Small neck knife (STATUS: SOLD)Metallurgic powder RWL-34 stainless steel blade, brushed wenge scales, carbon fiber pin&l...
24/01/2017

Small neck knife (STATUS: SOLD)
Metallurgic powder RWL-34 stainless steel blade, brushed wenge scales, carbon fiber pin&lanyard tube, satin hand rubbed finish.
153mm total length, 65mm blade.
I can make a similar one for 120 euro (sheath and shipping not included).

first one in 2017!EDC knife (STATUS: my niece saw it, so... it's her knife now :D )Metallurgic powder RWL-34 stainless s...
06/01/2017

first one in 2017!
EDC knife (STATUS: my niece saw it, so... it's her knife now :D )
Metallurgic powder RWL-34 stainless steel blade, acrylic scales, carbon fiber pin&lanyard tube.
I can make a similar one for 100 euro (sheath and shipping not included).
If it's part of a mini-batch the price will be 85 euro (sheath and shipping not included).

Bird&trout knife (STATUS: SOLD)Metallurgic powder RWL-34 stainless steel blade, brushed wenge scales, carbon fiber pin&l...
18/12/2016

Bird&trout knife (STATUS: SOLD)
Metallurgic powder RWL-34 stainless steel blade, brushed wenge scales, carbon fiber pin&lanyard tube.
I can make a similar one for 120 euro (sheath and shipping not included).

small batch of knives. price: 75 EURO/pcs + shipping.from left to right:1. bushcraft neck knife (STATUS: USUALLY ON STOC...
07/12/2016

small batch of knives. price: 75 EURO/pcs + shipping.
from left to right:
1. bushcraft neck knife (STATUS: USUALLY ON STOCK)
2. EDC knife (STATUS: USUALLY ON STOCK)
3. bird&trout knife (STATUS: USUALLY ON STOCK)
- full-tang, zero scandi grind
- total lenght: 160-165 mm
- blade: 2,5 mm thick
- cutting edge: 65-70 mm
- metallurgic powder RWL-34 stainless steel
- green burlap micarta scales (also available in red, same price; ask for other materials)
- carbon fiber pin&lanyard tube (also available in brass, 5 EURO)
- kydex sheath (on demand, price: 15 EURO; ask for other options)

diver knife (status: SOLD):- full-tang, zero chisel grind (right-handed)- 440C stainless steel- G10 scales- carbon fiber...
23/10/2016

diver knife (status: SOLD):
- full-tang, zero chisel grind (right-handed)
- 440C stainless steel
- G10 scales
- carbon fiber pins
- kydex sheath
I can make a similar one for 195 euro (sheath included, shipping not included).

outdoors knife (status: MY OWN KNIFE :D ):- handforged (this knife was made without power tools)- full-tang, zero high-c...
18/10/2016

outdoors knife (status: MY OWN KNIFE :D ):
- handforged (this knife was made without power tools)
- full-tang, zero high-convex grind
- romanian OSC10 carbon tool steel
- unknown burl scales
- brass corby rivet & lanyard tube, black vulcanized fiber liners
I can make a similar one for 460 euro (sheath and shipping not included).
If I use power tools, the price will be 160 euro (sheath and shipping not included).

Kephart-inspired knife (status: SOLD):- handforged- full-tang, zero saber grind- romanian OSC10 carbon tool steel- brush...
18/10/2016

Kephart-inspired knife (status: SOLD):
- handforged
- full-tang, zero saber grind
- romanian OSC10 carbon tool steel
- brushed wenge scales
- brass corby rivet & lanyard tube
I can make a similar one for 150 euro (sheath and shipping not included).

Address

189 Main Street
Remetea Mare
307350

Telephone

+40740070391

Website

Alerts

Be the first to know and let us send you an email when Knivesmyway posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category