05/03/2025
The City Government Of Victorias
In Celebration Of 27th Charter Anniversary
KADALAG AN FESTIVAL
🚦🏁SIDLAK DRAGRACE 2025🚦🏁
March 14, 15 & 16, 2025
Brgy. XXI, New Access Road, Victorias City
Race Schedules :
1st Day
March 14, 2025
🚦TESTING DAY ( All units )
2nd Day
March 15, 2025
🚦Mio 59 Power 160cc
🚦China 125 CPC
🚦PCT 150 /TMX DownStroke
🚦57 mm TB SSSV
🚦Aerox / Nmax Bold On Cam
3rd Day
March 16, 2025
🚦RFI Allstock
🚦Raider 150 PCC
🚦RFI ECU Only
🚦Raider 150 25G/12K
🚦RFI Allstock ( Vitroriahanon )
🚦Raider 150 CPC
🚦CATEGORY RULES🚦
🚦 Mio 59 power 160cc 🚦
✔110 kg weight limit
✔59mm Piston limit
✔160cc limit
✔open valve size (2 valves)
✔Mags size 14
🚦Pushrod China 125 - CPC ( CARB, PIPE, CDI )🚦
✔125kg weight limit
( Begginer Rider only )
ALLOWED :
✔ Allowed Ignition Coil
✔ Allowed Clutch Spring/Lining
✔ Allowed Pin 13 and Pin 15
✔after market piston allowed
* makoto/rabbit/MTK
✔after market valve allowed
* skygo
✔Cylinder Head Must Be CHINA 125 (Stockhead)
✔Stock Crankshaft Bearing
✔valve spring must be stock OEM,
especially inner valve spring
✔valve lock/cotter must be china (bawal TMX)
✔Stock Bore 56.5mm
✔Stock Stroke 49.5mm
✔Stock Valve size 24mm & 29mm
✔Stock Camshaft
*Lift Limit 6.09
( higher than this matic DQ )
* Base Lobe atleast 26.3 UP
( Lesser than this matic DQ )
✔With base and head gasket
✔Stock Bearing
✔Stock Fuel Tank (Functional)
✔Engine Support must be PRESENT
✔ Engine Starter Functional
✔ Stator Functional
✔ Charging System must be Functional
✔ Headlight Functional
🚦PCT China 150/ TMX Downstroke🚦
✔Stock bore
✔Stock stroke
✔Stock valves size
✔Open chassis
✔120kg weight limit
🚦57mm TB sssv🚦
✔57mm piston limit
✔Stock stroke
✔Stock valves size
✔115kg weight limit
🚦Aerox/Nmax Bolt On Cam🚦
✔DRP Rules
🚦RFI allstock🚦
✔Open Rim, Pipe, clutch springs, pinion & sprocket only
✔The rest is stock
✔Lights must be functional
✔Stock handle bar or RS handle bar only (re-angle only, reposition NOT allowed)
✔All sensors must be functional
✔Crankshaft Bearing must be Force Fit
( No Lag lag Bearing )
✔60% body cover
✔135kg weight limit
🚦Raider PCC 🚦
✔Port, Carb, CDI
✔Stock bore - 62mm
✔Stock stroke - 48.8mm
✔Piston must be original 25g (valve pocket allowed, no lightened, no regrove piston ring, no tabas)
✔Retainer must be OEM (no tabas)
✔Engine valve (22mm 19mm) no lightened valve allowed
✔Stock head (resurfacing is not allowed, 98.000 mm minimum. 97.99 or less is DQ)
✔Zero gasket allowed
✔Intake manifold OEM 25g (porting allowed)
✔Adjustable cam gear allowed
✔Camshaft must be original duration (Intake: 6.9- 6.8 28.05 up base circle - Ex: 6.7-6.5 27.55 up base circle)
✔NO lightened camshaft, w/ or w/o comp release
✔OEM raider crankshaft w/ balancer and OEM connecting rod
✔NO lightened crankshaft pin, NO lightened crankshaft gear. All parts of the crankshaft must be stock.
✔Displacement: 147.33
✔Must be OEM R150 magneto (magneto 100% functional), No dry magneto
✔Open Stator ( Meron o Wala )
✔Open transmission(must be for 6 speed r150)
✔Clutch housing must be OEM (no lightened, no aftermarket)
✔kick starter gear w/or w/ out
✔oil cooler must be functional
✔Aftermarket block is allowed as long as same length with the original
✔Open carb(any size)
✔Open CDI
✔Open ignition coil
✔Open valve spring
✔Open clutch spring
✔Open clutch lining and open pressure plate
✔Open bearing (engine & Transmission)
✔Battery operated allowed
✔Open handle bar
✔Alloy frame, sub frame, T-post, swing arm, gas tank allowed
✔Brakeless hub(rear) allowed
✔120kgs weight limit
🚦 RFI Allstock - ECU only 🚦
(Battle of ECU tuning)
✔Open Rim, Pipe, clutch springs, pinion & sprocket
✔Open ECU & open ignition coil
✔Aftermarket block is allowed as long as same length with the original; piston must be stock
✔The rest is stock
✔Lights must be functional
✔Open handle bar
✔Zero gasket NOT allowed
✔All sensors must be functional
✔60% body cover
✔135kgs weight limit
🚦 Raider 25G / RFI 12K 🚦
✔Stock bore
✔Stock stroke
✔Stock valve size
✔120kg weight limit
🚦RFI Allstock ( Victoriahanon )🚦
✔RFI Allstock Rules
✔Open Unit Owner (RFI)
✔Exclusive Victoriahanon RIDER
🚦 Raider CPC 🚦
✔Carb, Pipe, CDI only/the rest is stock
✔Crankshaft Bearing must be Force Fit
( No Lag lag Bearing )
✔Raider 125/150 manifold only
✔Manifold porting only allowed at carb intake
✔1st gen unit is NOT allowed (No starter)
✔Aftermarket block is allowed as long as same length with the original; piston must be stock
✔Stock cams with compression release, stock cam gear
✔Stock valves, valve springs & retainers (aftermarket NOT allowed)
✔Stock bore & stroke
✔Stock connecting rod & crank pin
✔Stock crankshaft(stock balancer)
✔Stock transmission
✔Stock drive gear
✔Stock pulser position
✔Stock flywheel with starter & starter gear
✔Stock handle bar or RS handle bar only (re-angle only, reposition NOT allowed)
✔Open clutch linings, racing clutch springs allowed
✔Complete gaskets (head & block), must be original SGP gaskets
✔Open ignition coil
✔Mixed engine parts allowed
✔Battery drive not allowed, charging system must be functional
✔Stock harness, stator must be functional
✔Crank pin bearing must be original
✔Open sprocket ratio
✔60% body cover
✔135kgs weight limit
NDK - Negros DRAG King
PDL - Panay Drag League
