Turbo Care NZ Ltd

11/09/2026

Check out what we found inside this Komatsu turbo that came in with lack of power funnily enough

04/09/2026

This JCB came to us with boost-related fault codes. Once we stripped the turbo, we found severe corrosion inside the turbine housing.

This is usually caused by moisture from condensation during long periods of inactivity or short running, or water entering through the exhaust. Less commonly, coolant entering the exhaust can also be responsible.

The corrosion can restrict or seize the turbo’s variable vanes, preventing it from controlling boost correctly and causing underboost or overboost codes.

The fault code tells you where to look the strip-down shows what’s really going on!

07/08/2026

A couple of Nissan VG30 turbochargers in the workshop for a freshen up and performance upgrade.

These factory turbochargers feature ceramic turbine wheels, similar to the RB series turbos. For their time, they were an advanced design, combining lightweight ceramic turbines with a ball-bearing centre section to deliver excellent response.

Unfortunately, the ceramic turbine wheels are also well known for failing, particularly on modified engines or after years of service.

For many years we've been upgrading these units by machining a Garrett CHRA into the original housings. This retains around 95% bolt-in compatibility while significantly improving durability and reliability.

Only a couple of minor modifications to the oil feed system are required due to converting them back over to journal bearing

31/07/2026

Looking for the right turbo? Start with our Featured Turbos!

We've hand-picked some of our most popular turbochargers, from direct replacement units to high-performance upgrades for street, race and off-road applications.

Whether you're chasing more power or replacing a tired turbo, our Featured Turbos showcase some of the best options available.

✅ New arrivals
✅ Best sellers
✅ Performance upgrades
✅ Genuine & premium aftermarket brands
✅ Expert advice from New Zealand's turbo specialists

👉 Browse our Featured Turbos today:
https://turbocare.co.nz/collections/frontpage

Turbochargers - New and Reconditioned Turbochargers, Parts, Accessories, Servicing and Diagnostic Work

17/07/2026

A recent custom machining project completed in our workshop.
This MT5 tailstock adapter was precision machined from 4140 high tensile alloy steel to suit a 40mm shank u-drill. The tool was made to allow us to remove large amounts of material quickly and efficiently while maintaining the rigidity needed for heavy duty machining.

While turbochargers are our core business our workshop is equipped with CNC and conventional machining equipment allowing us to manufacture custom components, tooling fixtures and one off engineering solutions to suit a wide range of applications.

25/06/2026

It only needed new seal. If only it was that easy 🤔

Not always.

This bearing housing has a bearing bore that runs true, but the piston ring bore is 0.06 mm out of alignment with the bearing bore.

Because the shaft runs in the bearing bore, the piston ring bore must be concentric with it. Simply replacing the seal ring without measuring won't correct the problem.

The correct repair is either replace the bearing housing with a new one, or grind the ring area seal oversize which will true this to the bearing bore.

Anyone can replace parts. A proper rebuild starts with measurement.

09/06/2026

This Nissan Navara turbo came into us for a warranty assessment...

Safe to say it didn’t take a rocket scientist long to figure this one out 😅

06/06/2026

🏁 RACE 1 WIN AT THE BEND! 🏆

🥇 P1 - Race Winner
🚛 #19 BDK Earthmoving Super Truck
👨‍🏁 Dale Cornfoot

29/05/2026

Turbocharger Tip

When removing or reinstalling a compressor cover, take extra care not to contact the compressor wheel blades during assembly. It does not take much to nick, bend or damage a blade especially on tighter tolerance turbochargers.

Even minor blade damage can lead to:
Balance issues
Reduced performance
Unwanted noise
Premature turbocharger failure

A few good habits

Keep components clean
Never force the cover into place
Check alignment carefully
Rotate the assembly by hand before tightening fully

A few extra minutes and a bit of care can save a very expensive repair bill later on

25/05/2026

This Garrett TV8101 turbo came in for a checkover today.

Once we removed the turbine housing, it became pretty clear we’d found half the engine inside it 🤣

Unfortunately this is the result of a dropped valve, a good reminder of just how much damage engine failures can cause to a turbocharger in a very short amount of time.