Revolt Surf, Via Regina Elena, 2, Riola (2026)

27/06/2023

INDIO 🌈 Endurance Mid Lenght - India

This Indio surfboard is designed to maximize fun and progression. The shape is similar to a longboard but smaller and more manoeuvrable. You can walk on the board or just surf in the middle.

It will perform wherever you stand thanks it’s flat midsection rocker, tail rocker and 60/40 rails.

The Indian Endurance Midlenght is a super fun board. All the classics of a midlenght with a modern twist.
A board that will surprise you with its speed and traction
Its wide, rounded tip helps you glide over the wave and its soft rocker gives you great paddling power while making it a very easy board to use.
Made with epoxy of great strength and durability.
Available in various colours: terracotta, light blue and new Indian painted.

Technical characteristics: Indian Mid Epoxy

Epoxy Construction.P
Proven Shapes
EPS fused cell core
Extra High Quality fiberglass Lay Up
Extra durable epoxy glass
Lightweight
Compatible with Futures Fins.

For what type of surfers do we recommend the Mid Lenght Indio?

Recommended for all types of surfers from beginner to advanced level.

For what type of waves do we recommend the Indio Mid?

For beach waves between 1/4 meter and 1,5m.

Available sizes Indio Mid Length:
7'0" x 21" 3/8 x 2" 7/8 - 49,40L

24/06/2023

QuickSilver - 2.5mm Highline Ltd. Long John Springsuit

100% StretchFlight x3 neoprene - warm, ultra-light & flexible
GBS (glued and blind stitched) seams for maximum flexibility and minimal water entry
F’n tape internal seal makes all seams watertight
Asymmetrical front zip entry system
YKK® #10 Zip for minimal water entry
Ecto-Flex knee pads, durable, lightweight & flexible to protect you & your board
Flush Lock 2.0 stretch seals to prevent flushing through the ankles
Fused edges for ergonomic low-profile neck and ankles that prevent flushing
Suitable for suggested water temperatures of 18°C - 21°C / 65°F - 70°F
This is a guide only: Weather, sensitivity to the cold & conditions at your local break will affect temperatures & choice of equipment
Drainage holes
Weight: 775 g

Composition & Care
83% Neoprene Yamamoto 17% Elastane
Hand wash cold, lay flat to dry.

Men's 2/1MM Axis SharkSkin Front Zip Wetsuit Jacket

UltraStretch Neoprene: - Comfortable, lightweight neoprene with softer foam and a tighter weave textile for less water absorption, better durability, and maximum stretch.
Flatlock Seams: - Durable, comfortable 7-thread seam construction lies flat and smooth against your skin.
Full front zipper for easy on and off.
2mm body and upper sleeves, 1mm neoprene under sleeves and side panels.

Composition & Care

100% Neoprene.
Hand wash cold, lay flat to dry.

#サーフィン #波

22/06/2023

⚡️ INDIO ENDURANCE 9'1'' TRIM MACHINE LONGBOARD PURPLE ⚡️

This epoxy board is ideal for both experts and beginners. The wider nose aids in paddling. Its generous volume and harmonious profile make it an easy, fun, and suitable board for all types of conditions.

Inspired by the double-ender design, this board is crafted to cover all aspects of longboarding. It performs excellently in both turns and nose rides, from small waves to head-high waves. It features a single concave in the nose and middle section, and a double concave between the fins, creating a V shape in the tail. Combined with its characteristic parallel rails, this longboard is perfectly trimmed like a well-oiled machine!

Dimensions:
9'1"x20 7/8"x2 7/8"-70.2L

Fins included

Thanks to the experience and knowledge of the Pukas team, these boards are designed to be compatible with all skill levels.

#サーフィン #波

20/07/2022

Today a post for the longboarders friends ⚡️

THE DnD 8.75”

Deflow and Donizetti

This fin has been a long time dream of mine.
A fin where I could find the qualities of D fins I love so much, but at the same time without all this dead area that can at times be problematic.
I came across this template via a friend about a year ago.
It is inspired by legendary master shaper and desig- ner Joe Quigg. I dared to modify it just a bit accor- ding to my tastes.
First and foremost this is a “speed fin”, made for trim- ming with control at high speeds.
It also turns beautifully, letting the board go from side to side, pivot style, or in a more involved way on the rail without problem.
Testing the DND on a variety of boards and condi- tions, I’m truly amazed at how the fin adapt itself to whatever you can throw at it. Pig, pintail or standard longboard, don’t let its vintage look fool you !
I really hope you will appreciate the DnD and that it will get you back to those wonderful times when things purposes were both functional and aesthetic!

Sincerely yours, Clovis Donizetti

#サーフィン

18/07/2022

It’s Monday guys, let’s start the week with this beauty ⚡️

Next week finally some waves will arrived, ready for the first really board ? This Gem will fit perfect for you

Here THE MR. FREAKY by

The main feature of this model is the big volume. Sizes larger than 6’0 ” is especially recommended for beginner who want to ride waves and want to improve and have fun. The slightly concave bottom in the central part, the high volume and the good width allow an extreme easy take off, provide stability and an exceptional glideness even on very small waves. The thruster fin configuration provides good maneuverability. 
Size : 6’8″ 21″ 5/16 2″7/8 Volume: 49 L

Bottom: Big-Squash
 Tail: concave to V

#サーフィン

13/07/2022

Here guys the board that could really be considered one of the primordial Surfboards.

THE ALAIA & HAND PLANE SURF by

The Alaia can be traced back to the origins of surfing itself.

While the Alaia is not going to feel like any foam surfboard you’ve ever ridden, it can act as a sort of time-machine to transport you back to the beginning of wave ridding as well as offer some unique experiences.

Experimentation and exploration is only going to make you a better surfer. The alaia definitely earns a top spot for equipment to test.

Leonardo La Monica, Shaper

L’avventura di Leonardo La Monica come shaper inizia nel 2012, paradossalmente lontano dal mare. Nonostante la sua passione per il surf si trasferirsce da Cerveteri sull’Appennino Tosco Emiliano per amore. Tiene calmo il suo cuore leggendo di surf, di storie di grandi surfisti e pionieri e guardando film nei momenti in cui gli è impossibile spostarsi a caccia di onde. I lunghi periodi lontani dall’acqua diventano per Leonardo motivo di studio, un’occasione per conoscere la sua disciplina sportiva anche dal punto di vista storico e teorico. Ed è così che scopre le antiche tavole usate dagli Hawaiani e Polinesiani già nel 1700: le alaia. “È stata una folgorazione – ci racconta Leonardo – e mi sono buttato provando a farle. Ho studiato un po’, comprato gli strumenti per lavorare, legno di paulonia (che non assorbe acqua marina) e improvvisato una shaping room nel mio garage. Lavorando nei fine settimana e nei ritagli di tempo, dopo alcuni giorni, con molta lentezza, sono riuscito a finire la mia prima alaia. L’ho messa in acqua e l’ho provata. Dopo innumerevoli tentativi, su una minuscola scaduta da 50 centimetri, sono riuscito a partire, un drittone di 40 metri a dire il vero, ma tanto è bastato per farmi felice come se avessi surfato a Jaws. Da quel giorno ho iniziato per hobby a realizzare le alaia, tutte a mano, cercando di migliorare di volta in volta sia la tecnica che lo shape. Riuscire a surfare le tavole che io stesso realizzo, vedere altre persone interessarsi al progetto, altri ragazzi che credono nella cosa, mi dà una spinta e una motivazione ad andare avanti enorme.”

04/07/2022

Today guys we present you a dreamy Surfboard, that every surfer must have in the quiver

THE ENJOY TWIN by

Enjoy twin is the new twinfin developed for the RETRO jewels line and can not miss in the quiver of every surfer for its maximum versatility!

The fundamental characteristics of this model are exceptional planability, excellent speed and a unique fluidity in all wave conditions.

The traditional 1970s keel outline and the high volume guarantee ease in paddling and an early take off. The deep fish tail combined with the twin Keel setup ensures a very soft and smooth ride. Getting the maximum harmony with the wave is the absolute priority for this shape.

Each wave will become a white sheet on which to draw soft and continuous lines.

No stress and enjoy your surf!

Fins by THE KEEL

Surfing a fish can be one of the best experiences ever. From bad beachbreak waves to high quality pointbreaks, a twin will change your perception of reading the wave. This Keel fins are designed for providing a classic approach of twin surfing down the line speed, long bottom turns and open face carves.
Made on fiber glass adds stability and the classic Keel fin feeling.

Construction: Fiberglass

Feel: Keel

Flex: 2/5

BASE (mm) 157.45
HEIGHT (mm) 116.49
HEIGHT “ 4.58
FOIL FLAT
RAKE 40.58
AREA 21.75

#サーフィン

03/07/2022

Happy Clients Happy Days ⚡️🎉

Here Bernd with is new beautiful Toy

TORQ 7.2 MOD FUN - TET-CS
“LIGHTER AND MORE RESPONSIVE”

The torq TET-CS, or Carbon Strip utilises the same advanced TET process with a performance oriented lay-up. The TET-CS Mod Fun features a UD Carbon Strip on the base and deck for strength but allows torsional flex.

These boards feel more lively than the standard TET; slightly lighter and more responsive, making them even more fun to surf, but just as strong as before ⚡️

#サーフィン

30/06/2022

Introducing one of our gems 💎

FCS II Christenson Longboard Fin 9.5

The 7.5" to 8.5" Christenson will work amazing in your favourite mid length board.
Or step it up to the 9" to 9.5" for your everyday log.

Construction: Fiberglass & Resin

Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

The FCS II Tool-Less Longboard System

* No need for a plate and screw.
* Ability to adjust your fin position in the box mid surf.
* Easily insert or remove your fin in seconds. No fin key required.
* Designed to be used in most existing Longboard boxes. No new box required.

#サーフィン

28/06/2022

Happy Client Happy Days 🎉⚡️

Here with his new custom toy, the wonderful BLACK SWAN by the legendary Italian shapers

This classic 70’s single fin model has a shape developed for the retrò style lovers who are looking for soft rides, harmony and a clean style.
Expect smooth arcing turns and fluidity surfing the black swan. The outline and the volume distribution are moved forward to guarantee a centered position of the surfer while surfing and an extremely easy take off .
The round- pin tail together with the V bottom ensures speed and a special feeling with the wave. The rocker line and the rail shapes give the possibility to get nice unbroken sweeping turns.

Bottom: V
Tail: Round-pin
Rail: medium
FINS setup: Single -thruster -twin
Optimal WAVES range: 0.5m – 2.5m

#サーフィン

27/06/2022

Available In Store

Surf Trunks 60’s Story
- -

60’s surf trunks take inspiration from those worn by golden age surfers.
Outside 100% cotton for high resistance, inside Lycra to always feel comfortable.
In a globalized world we still think locally. A small tailor’s shop, one artisan, a production with patience. 50 pieces, arise from the love for the quality of craftsmanship. The use of cotton adds value and has a meaning of other times, connected to the culture and tradition of surfing ⚡️

26/06/2022

Ready to Rock guys ⚡️
We’re open from Monday to Saturday in the evening, from 18:30 to 21:30/22.
Possibility to preorder 3290966770 📲
More infos ☝🏽
#サーフィン
# revolt20surf

Revolt Surf

27/06/2023

24/06/2023

22/06/2023

20/07/2022

18/07/2022

13/07/2022

04/07/2022

03/07/2022

30/06/2022

28/06/2022

27/06/2022

26/06/2022

Indirizzo

Sito Web

Notifiche

Contatta L'azienda

Scelte rapide

Condividi

Digitare