08/11/2024
ok folks, airgun things
there have been a lot shooters who are dissapointed in the initial results when first fitting a regulator to their p*p, there are 2 primary reason for this, one is that often there ia not a large enough plenum (chamber) between the regulator and the valve, and the pressure at the valve seat drops during the shot to a much greater extent than in the unregulated versionz leading to lower velocity than expected.
Assuming that is not the case, then the most common thing the shooter notices is that the shot count is much lower that he expected. this almost always happens if the hammer strike is not reduced when the regulator installed and is a result of the hun having been previously tuned to the peak at say 2200-2400 psi and now its running on a much lower pressure, makin it air hog.