Sky Gear Experts

30/05/2026

Tonfly TFX ALUFINISH Impact rated full face helmet.
Visible fiber, technology you can see!🪂🪂

https://skygearexperts.eu/tonfly/tonfly-tfx-alufinish

28/05/2026

01/05/2026

Aerodyne🚨 SERVICE BULLETIN SB300426 – MANDATORY UPDATE
Aerodyne has issued a mandatory configuration update for ICON systems (Sizes 1–5).
✔ AAD cutter must be placed above the reserve pilot chute
✔ Applies to both NEXGEN and Pre-NEXGEN
✔ Compliance required before next jump
Identify your ICON by checking the warning label on your system:
• ICON NEXGEN: Serial number starts with “IX”
• ICON PRE-NEXGEN: Serial number starts with “IN”
https://www.flyaerodyne.com/e_files/content/SERVICE_BULLETIN_-_30042026_-_AAD_V1.pdf

20/04/2026

Aerodyne updated TB-250122 from Recommended to Mandatory.
AAD Cutter placement to be moved from the existing position on reserve flap #1 to reserve flap #3.
Icon containers affected: IX- series from sizes I-1 through I-5/S-5 which are fitted with an AAD.

Aerodyne would like to provide a further update regarding the ongoing investigation into the incident in the United Kingdom.

The investigation, led by British Skydiving, remains ongoing, and at this stage, no conclusions have been reached regarding the cause of the incident or the equipment's performance.

We continue to support the process and are working in cooperation with all relevant authorities. Investigations of this nature are complex and may take time, and early-stage information may be incomplete or subject to change.

🔹 AAD Cutter Placement – Configuration Update
As previously communicated in Technical Bulletin TB-250122 (2022), Aerodyne identified AAD cutter placement as a configuration consideration based on internal testing and issued a recommendation for certain configurations.

In line with ongoing product evaluation and to promote global consistency in configuration, Aerodyne will now be formalizing this existing recommendation as a mandatory configuration requirement. A separate communication will be issued outlining the implementation details.

Both cutter positions have been tested and approved, and the system has been in service for many years with successful reserve activations in operational conditions.

This step reflects a standardization of configuration, and not the result of any findings from the current investigation.

🔹 Our Commitment
Aerodyne remains fully dedicated to supporting the investigation process, upholding the highest standards of safety, quality, and performance, and providing clear, accurate updates as new information emerges.

We recognize the level of discussion within the skydiving community and appreciate the shared focus on safety. We encourage reliance on verified information from official sources as the investigation progresses.

Further updates will be provided as appropriate.

17/04/2026

British Skydiving Incident Regarding the Icon Harness/Container System

We would like to express our deep condolences to the skydiver’s family and friends following the recent incident in the UK.

British Skydiving has issued a bulletin, grounding Icon harness/container systems, as a precautionary measure. The PIA Rigging & Technical Committees are aware of the incident and are maintaining contact with the parties involved.

PIA is an industry group with no regulatory authority. We will be disseminating information as it becomes available. Our committees will evaluate the data and develop a plan of action to assist Icon H/C owners, and riggers who service this equipment.

PIA is committed to provide support to all who are affected by the grounding notice issued by British Skydiving.

There has been no conclusion, to date, regarding the root cause of thisincident. We are awaiting more information from Aerodyne and British Skydiving regarding this matter.

PIA is kindly requesting the following from Icon Owners and Riggers: For those who will not be jumping their Icon systems during this fact-finding period, please do not open your reserve containers so the pack job can be preserved for evaluation by designated personnel, thank you.

Respectfully,
Kirk Smith
PIA Rigging Chair

T.K. Donle
PIA Technical Chair

13/01/2026

Time for a new grommet on this Teardrop reserve pilot chute aluminum cap 😎

16/12/2025

🪂New CYPRES 2 Cmode AAD units in stock, available for immediate shipping!!🪂
https://skygearexperts.eu/airtec/cypres-2

15/10/2025

Skydiving gear store & professional parachute rigging loft.
💥 Top skydiving brands.
🪂 High quality rigging services by an FAA Master Rigger

23/09/2025

🪂New batch of lines from CSR in stock, available for immediate shipping!🪂
https://skygearexperts.eu/csr-braids

C.S.R. INC.

19/08/2025

🪂We build custom linesets on order, using top quality raw materials! Contact us and order yours!!🪂
https://skygearexperts.eu/