Cumbria Airgun Repairs

Cumbria Airgun Repairs All makes and models of p*p,spring and Co2 airweapons serviced and repaired

It's a shame it's not as easy to replace the cyclinder seals on a hw110 as it is to replace them on its big sister the h...
16/02/2022

It's a shame it's not as easy to replace the cyclinder seals on a hw110 as it is to replace them on its big sister the hw100

24/10/2021

If at first you don't succeed, try and try again!

Ladies and Gents! This does not apply to shooting airguns or any gun for that matter.

If you feel there may be a barrel obstruction, stop and check, don't take chances, airgun blockages are an inconvenience, blocked barrels in a firearm or shotgun may cost you your life.

Notice in the picture below some of the pellets are almost "welded" together with the force of one hitting the next, very cool to see them coming out complete with the impression of the barrel rifling.

Disassembling the gun to access the barrel brings you to a couple of the numerous seals on an P*P airgun, they weren't in great condition so they were replaced to save going back Into the gun.

Many thanks to Eric @ Cumbria airgun repairs

Great to see him at work (finally)
The lad makes a pretty decent brew aswell 😉

Just a reminder only use breathing quality air in your expensive p*p rifles boys and girls they work better and require ...
24/04/2021

Just a reminder only use breathing quality air in your expensive p*p rifles boys and girls they work better and require less servicing if fed on a correct diet

A nice little lathe project today. A pard to scope adapter ring made from delrin
15/04/2021

A nice little lathe project today. A pard to scope adapter ring made from delrin

Setting up this new workshop is taking time but it was never going to be easy. Just need some stairs to get upstairs now...
22/03/2021

Setting up this new workshop is taking time but it was never going to be easy. Just need some stairs to get upstairs now that the old ones have been ripped out.

That took some cleaning up. It had more grease than a John Travolta film. A good clean of all components and a new seal ...
16/03/2021

That took some cleaning up. It had more grease than a John Travolta film. A good clean of all components and a new seal kit and this little gun should leave feeling a whole lot better.

Stuck pellet removal can sometimes take alot of patience and the ability to make the tools to do the job.
08/03/2021

Stuck pellet removal can sometimes take alot of patience and the ability to make the tools to do the job.

A project from 12mth ago the stock was broken so I made a spalted beech cap for it to the stocks original dimensions. Th...
06/03/2021

A project from 12mth ago the stock was broken so I made a spalted beech cap for it to the stocks original dimensions. The barrel was shortened and screwcut. All internals were renewed and a new side plate made then all metal work was given a nice coat of cerakote

Valve stem that I made for project
06/03/2021

Valve stem that I made for project

Hw100 issues
06/03/2021

Hw100 issues

06/03/2021

Every journey starts with one small step.

06/03/2021

For all your airgun repair needs in Cumbria. Experience of repairing and tuning all popular brands of p*p and spring rifles, Co2 rifles and pistols and a whole host of other things.

Address

Workington

Telephone

+447876543486

Website

Alerts

Be the first to know and let us send you an email when Cumbria Airgun Repairs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Cumbria Airgun Repairs:

Shortcuts

Share

Category