FW Motorsport

FW Motorsport FW Motorsport is a sportscar team founded by Fergus Walkinshaw, specialising in race and road car builds, classic vehicle restoration and modernisation.

Founded in January 2013 by Fergus Walkinshaw, son of the late Formula 1, sports and touring car team owner Tom, FW Motorsport offers a wide range of professional motorsport and automotive services from its Oxfordshire premises, ideally situated in ‘Motorsport Valley’. FW Motorsport is an established sportscar racing team with a proven pedigree gained competing in the Michelin Ginetta GT Supercup,

part of the BTCC package. Experts in racecar preparation and development, chassis set-up and composites, FW Motorsport can provide all-encompassing race support, from testing programmes and driver tuition, to full on-event race team management. Our crew of highly experienced mechanics and engineers specialise in complete race and road car builds, high performance modifications, classic vehicle restoration and modernisation projects across all marques and models. The team’s major projects include rebuilding a 33-year-old classic Range Rover in less than three days at Silverstone Classic 2016, where the entire ground-up restoration of the 1983 model was completed with parts sourced from eBay and carried out in front of a live audience. Additional services include, but are not limited to:
• Suspension and chassis setup
• Corner-weighting and tracking
• Braking upgrades
• Engine performance enhancements
• Engine aspiration conversions and upgrades
• CAD design and drawing of one-off or custom components
• One-off race or road car builds
• Modernisation / Resto-Mod projects
• Classic Vehicle Restoration:
o Renewing of suspension components
o Rebuilding / reconditioning of drive train components
o Electronic fuel and ignition conversions
o Full chassis up rebuild / restorations

Whether you are a driver seeking competitive packages and race support, or if you have a bespoke road car modification or restoration project in mind, please get in touch by emailing [email protected]

One we've been working on for a while. Full custom engine harness and Haltech  elite ecu integration for this Audi RS4 C...
02/10/2021

One we've been working on for a while.
Full custom engine harness and Haltech elite ecu integration for this Audi RS4

Car built by Hard Knocks Speed Shop

When we began with this one we went down the list of options in the haltech software and ticked them all.
Sequential ignition and injection
Twin wideband
Twin knock control
Flex fuel
Egts
Boost control
Launch control
Anti lag
Rolling antilag
Twin port watermeth injection
Map switching
Bimodal exhaust control
And a ton more, you name it its got it, used every available input and output we had.

Car now has a safe base file thanks to TPW Engineering and should be making some big numbers when it hits the dyno.

One from a couple of weeks back. Bentley special on display at Silverstone for the Bentley drivers club meeting. Not bei...
26/08/2021

One from a couple of weeks back.
Bentley special on display at Silverstone for the Bentley drivers club meeting. Not being raced this year but with many upgrades in the pipeline it should be a formidable competitor when it hits the track.

06/07/2021

The sound of over 800HP

After we maxed out the uprated fuel system previously we installed a new dual fuel pump set up and boost referenced pressure regulator to the challenger and it was over to to finalise the mapping.

The 4C was on track again at Goodwood testing out some new upgrades.Improved turbocharger and transmission cooling. Our ...
06/07/2021

The 4C was on track again at Goodwood testing out some new upgrades.
Improved turbocharger and transmission cooling. Our new suspension system for the rear with refined geometry, and a new wavetrac differential to put the power to the road.

Position available for a motorsport technician to join our team, based in the Oxfordshire area.Applicants must have prio...
04/06/2021

Position available for a motorsport technician to join our team, based in the Oxfordshire area.
Applicants must have prior experience in the motorsport or high performance road car industry.
Capable of working on their own and as part of a team.
Good problem solving skills and lateral thinking with the ability to work off their own initiative.
Light fabrication and design skills a bonus but not a must.
Prior experience of both classic and modern cars preferred.

Competive rates of pay based on experience. Position would be on a self employed basis with potential for full time for the right applicant.

Please send all applications to [email protected]

18/12/2020

Making power with the boosted ep3.
Just shy of 400hp should make for a very fun B road blasting toy.
Mapped by TPW Engineering

Need some more air flow when on track to that custom intercooler? Vented front bumper with quick release front number pl...
16/12/2020

Need some more air flow when on track to that custom intercooler? Vented front bumper with quick release front number plate.

Custom ep3 front mount intercooler, designed and cnc cut in house with a high performance CSF core.
10/12/2020

Custom ep3 front mount intercooler, designed and cnc cut in house with a high performance CSF core.

Intercooler design finalised ready for parts to be cut out on the cnc and welded to the CSF core
03/12/2020

Intercooler design finalised ready for parts to be cut out on the cnc and welded to the CSF core

CSF alloy rad for the turbo EP3 we have in build, almost time to get started on the intercooler.
02/12/2020

CSF alloy rad for the turbo EP3 we have in build, almost time to get started on the intercooler.

Purchase any suspension or full polybush kit with fitting and receive a full track or fast road set up and alignment at ...
27/11/2020

Purchase any suspension or full polybush kit with fitting and receive a full track or fast road set up and alignment at no cost! You can also get an additional 20% off cornerweighting if booked at the same time to really get your high performance road, track or race car ready for next season.
Offer available until the end of Cyber Monday

Address

Silverstone Circuit,
Towcester
NN12 8TN

Alerts

Be the first to know and let us send you an email when FW Motorsport posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to FW Motorsport:

Share

Category