SUP Services

01/08/2026

29/07/2026

Fair to say the heat has got the best of a lot of boards recently..
But all is not lost, and for those that have chosen to repair and come to us, we're still getting you back out on the water like it never happenned.

26/07/2026

Customer wanted a kick step but didn't want to change their board.. no problem.. bespoke crafted using factory materials.

Need support with your paddle board, we're here to help.

16/09/2025

An untreated, seam leak will only ever get worse.

Keeping your board maintained is a key part to being safe on the water.

✅️ keep it clean to avoid the build-up of bacteria and improve bio security

✅️ wash it when it's inflated to ensure any punctures and leaks are picked up early

✅️ Service your valve to ensure it's operating correctly

✅️ check the fin box for cracks and your handles for any lifting

✅️ deal with any issues you find! Don't leave them and get caught out.

Supservices.co.uk

28/08/2025

Another beautiful rebuild after a complete failure of the inner and outer bands.

It's been a theme of repairs over the last few months due to the weather, but luckily, this owner came to the right place, and the boards back out on more adventures.😎

Supservices.co.uk

26/08/2025

Literally as good as new..! 😎
Original PVC surround and fin box keeping this board looking like it did when it left the factory.

Fin boxes, punctures, leaks ruptures.. we've got all your repair needs covered. 👍🏼

Need any support or advice [email protected]

13/08/2025

It's been a bit busy lately with a lot of these.. 👆..
The hot weather beat a lot of boards out there, but luckily, we're here to put it all right again. 😎.

So remember, in hot conditions:
✅️ Aim to keep your board cool / shaded

✅️ Reduce the operating PSI

❌️ Don't inflate a board that's been resting in the sun

❌️ An electic pump in hot weather will put hotter air into your board, accelerating the risk of failure.

Need any more advice or support.. [email protected]

05/08/2025

This took a bit of thinking due to the inner band being completely destroyed. 🤔

So after a few test fits and an internal rebuild, I could then rebond the outer rail and add an additional band due to some pvc stretch.

But overall, a great result and another board saved and back with the customer. 😎

[email protected]

19/06/2025

Successful patch work needs three simple things... Preparation, Precision, Patience

✅️ Preparation:
- Have everything you need to hand.
- Clean and prepare the area
- Mark the area you're going to patch

✅️ Precision:
- Use the right size patch
- Remove all corners - these are stress points
- Ensure the damage is in the centre of the patch when applied

✅️ Patience:
- Apply the first layer of adhesive and wait..
- When touch dry, apply a second layer and wait.. don't rush..
- Leave to cure for 24 hours

*above is not a structured order of instructions but an overall guide.

Got a puncture, tear, or cut, and not sure where to start?
Get in contact, and we are happy to advise and support to help you get back on the water.

Supservices.co.uk
[email protected]

18/06/2025

It's pretty much perfect..!
Love it when a rebuild goes so well it's like it never happened.

Over the years, our knowledge and skills have grown, and we never stop trying to improve the service we can offer to provide unrivalled results.

We support individuals, paddle clubs, and charities, right up to the biggest brands in the world.

Need support or advice.. Supservices.co.uk