BikeWrap

Call Directions Website

BikeWrap Official invisiFRAME and RideWrap fitter in Scotland

I can supply and install invisiFRAME or RideWrap protective kits for your bike

invisiFRAME kits are between £70 and £95 - see here for pricing https://www.invisiframe.co.uk/frames?___store=default

Hardtail kits are between £70-£75 dependent on model

Full Suspension are approximately £80 - £95 dependent on model

E-Bikes can be around £95 dependent on model

Suspension fork kits - £25 - £30

Frame Fitting is £100 - Your bike can be dropped off and will be ready for collection within 24 hours or less

E-Bike frame fitting is £110 - Your bike can be dropped off and will be ready for collection within 24 hours or less

Fork Fitting is £35

(example; Bike dropped off at 5pm Monday, ready for collection at 9am Tuesday next day)

Grant’s new Commencal Meta SX Power was in for RideWrap frame protection prior to it being built up with some serious bo...
08/10/2026

Grant’s new Commencal Meta SX Power was in for RideWrap frame protection prior to it being built up with some serious boutique parts at shortly.

Was able to give it a few seamless zero gap areas; downtube is made up of multiple sections and now meshed to appear as one, head tube of two sections now meshed into one, rear seat tube, and around the motor on non drive side so now looks almost invisible.

Gtechniq HALO ceramic coating was applied throughout to add extreme hydrophobic qualities to the frame to ensure it’s a breeze to keep clean after riding in any conditions the Tweed Valley throws at it.

This will be a serious looker especially when those inverted forks are installed…unreal build this in the making. Looking forward to seeing it complete shortly. 🔥🔥🔥🔥🔥🔥

John’s new Cube One44 Action Team was here for Invisiframe fork and frame protection. The entire front triangle is seaml...
08/10/2026

John’s new Cube One44 Action Team was here for Invisiframe fork and frame protection.

The entire front triangle is seamless including the top to down tube brackets, from head tube right down either side to seat tube. It now looks/feels as one piece of film wrapping right around the triangle. Other sections are also seamless zero gap wherever possible (back end is alloy = welds, so can’t close those gaps up unfortunately 😂).

The Fox 36 in Stormtrooper white/black also has a Bosch ABS unit attached; this meant customising a fork kit around the ABS module mounts to get the kit to fit perfectly.

Whole bike was treated to Gtechniq HALO ceramic coating, designed specifically to adhere to paint protection film. This gives the bike a few years of extreme hydrophobic properties making the bike extremely easy to clean after riding in any weather and conditions. Should keep this bike looking sweet 😎

What a bike, said it before but this is possibly my favourite colourway Cube has ever done - I’d kill to get a set of the white forks (if anyone’s selling a set…hit me up asap 🤣)

🔥🔥🔥🔥🔥

Rob’s new Amflow PR Carbon Pro was in for Invisiframe frame and fork protection. From headtube right to seat tube were g...
08/10/2026

Rob’s new Amflow PR Carbon Pro was in for Invisiframe frame and fork protection.

From headtube right to seat tube were given a seamless zero gap install, and some other areas too where possible.

Gtechniq HALO ceramic coating was applied post install to add insane hydrophobic properties to the entire bike, ensuring it’s super easy to clean after riding in the worst of Scotland’s weather conditions.

Love this colourway of the Amflows in Basalt Grey 🔥🔥🔥

Stuart’s ex demo Amflow PR was in for RideWrap frame and fork protection. Bike was quite badly marred on paintwork howev...
08/10/2026

Stuart’s ex demo Amflow PR was in for RideWrap frame and fork protection.

Bike was quite badly marred on paintwork however once gloss film goes on it can hide this and generally get the bike looking fresh again.

This one’s now looking near new again.

Head tube right down to motor area is seamless rather than looking like multiple sections of film.

Gtechniq HALO ceramic coating was applied over the entire bike so it’s now extremely hydrophobic ensuring ease of cleaning for years to come.

Brilliant seeing a scuffed ex demo bike now looking like new again.

Nice bit of kit this 🔥

Marcin’s newly built up Yeti SB165 was here for Invisiframe frame and fork protection. Seamless install from top tube in...
08/10/2026

Marcin’s newly built up Yeti SB165 was here for Invisiframe frame and fork protection.

Seamless install from top tube into head tube into downtube right down to lower seat tube, this now looks like a single section of film covering from top to bottom on front triangle. Rear stays are also seamlessly joined to appear as one section too.

Gtechniq HALO ceramic coating was applied all over, giving entire bike extreme hydrophobic properties to ensure it’s a breeze to keep clean for years to come.

Absolutely stunning bike, absolutely love these especially in Yeti blue ❤️🔥🔥🔥🔥

 new YT Capra came in for  frame and fork protection. Paint job on the Capra is 80% matte with the top tube/downtube upp...
08/10/2026

new YT Capra came in for frame and fork protection.

Paint job on the Capra is 80% matte with the top tube/downtube upper sections gloss along with head tube area.

Rather than install matte film all over the bike essentially removing the glossy parts, decided I’d alter these sections of film, removing the matte then meshing in gloss on that zig zag line where matte meets gloss, and make gloss head tube parts too etc in order to keep the original look of the paintwork.

Took a few attempts as the matte area is slightly stepped where it meets gloss, but after some trial and error she’s now looking sweet.

Seamless install from custom headtube right to lower seat tube too 😃

Added in some extra matte film on various areas the kit wasn’t quite covering too to add more protection.

Gtechniq HALO ceramic coating was applied across the entire bike to add insane hydrophobic properties throughout, ensuring it’s a doddle to clean after riding in any conditions for years to come. Everything will be beading off this now.

Stunning bike, glad we could keep it looking as YT originally intended with the paint from factory 😎

Beeeeaut 🔥🔥🔥🔥

#ʙɪᴋᴇᴘᴏʀɴ

As per previous post below; this was the second frame to create a full custom wrap for an Elves Nandor carbon MTB frame ...
08/10/2026

As per previous post below; this was the second frame to create a full custom wrap for an Elves Nandor carbon MTB frame and Rockshox SID SL forks, from top tube to head tube and into downtube are fully zero gap seamlessly wrapped.

The crazy looking head tube area is one piece and film is protecting right into that hole area too which took a few attempts and a lot of trying new things to get film to conform to that shape. I could have simply cut the hole out..but where’s the fun in that..much better to try push the envelope on what’s possible 😉

Again designed entire bike as I went along and again was up against a strict deadline..whilst also fitting a few other bikes, an Audi and a Ferrari in around these two custom frames. It’s been a mental couple weeks 🤯😂

Invisiframe fork kit was used on the Rockshox SID SL forks to recoup some time rather than make custom wraps for them.

Gtechniq HALO was applied to both frame and forks adding extreme hydrophobic qualities ensuring it’s a breeze to keep this stunning paint job looking this unreal for years to come.

Couple of beauts off to join the matching TT bike custom wrapped last year in the West coast of Scotland. 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🔥🔥

Previously did a complete custom wrap on Gordon’s TT Elves frame/forks last year. He returned this year with an Elves Na...
08/10/2026

Previously did a complete custom wrap on Gordon’s TT Elves frame/forks last year.

He returned this year with an Elves Nandor hardtail MTB frame and Elves Vanyar hill climb frame, both in matching custom paint work as the TT bike, and also the matching forks for each.

Full frame protection was completely handmade and designed on the fly, including the forks, no one does pre made kits for these as yet.

From top tube, into head tube and into down tube the Vanyar shown is complete seamlessly wrapped with zero gaps between sections. Forks are entirely wrapped too, with only a few mm gaps where tension relief is required on the film conforming to their curves.

Always a challenge designing a kit on bikes I’ve never seen until the day they’re dropped off, and up against the clock with a completion date set 😃

Gtechniq HALO ceramic coating was applied across frame and forks to ensure they’re ridiculously hydrophobic and ensures this bike will always look stunning in any conditions for years to come.

Love how Gordon’s now got a fleet of these all in this unique chameleon purple/green flake paint merging to gloss white. Absolutely stunning, these Elves bikes are seriously good value and well made bits of carbon. 🤩🔥🔥🔥

Matthew’s brand new Amflow PR Carbon Pro was here to have Invisiframe frame protection installed. Love the matte grey co...
08/10/2026

Matthew’s brand new Amflow PR Carbon Pro was here to have Invisiframe frame protection installed.

Love the matte grey colour way of these, gave it a seamless head tube/down tube into motor cover area so looks/feels like one section of film instead of multiple giving it a super clean look.

Gtechniq HALO ceramic coating was applied across the entire bike including the forks to add an insane level of hydrophobic qualities throughout, ensuring it’s a breeze to clean for years to come.

Stunner that one 🔥🔥🔥

David’s new Cube One44 Stereo Hybrid SLX was in to have Invisiframe frame and fork protection installed. Full seamless w...
08/10/2026

David’s new Cube One44 Stereo Hybrid SLX was in to have Invisiframe frame and fork protection installed.

Full seamless wrap from headtube to seatube, entire sides feel as one section of film. No Fox 36 Rhythm fork kit available as a 27.5 size so customised a 29er kit to fit too.

Gtechniq HALO ceramic coating applied across the entire bike too, adding extreme hydrophobic qualities to the bike and ensuring it’s ridiculously easy to clean after trailage in any conditions for years to come.

First time I’ve had one of the One44 e-bikes in a size small too, with the smaller wheel size (275)

Lovely bike 🤩

Address

Newtongrange
EH224RY

Alerts

Be the first to know and let us send you an email when BikeWrap posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category