James Minns Airsoft Tech

James Minns Airsoft Tech General repairs, high speed builds, upgrades and TLC. All with a quality service.

Bonus points for guessing what this rubber pad is that broke off, went down the barrel to this E&L AK74 and jammed that ...
27/11/2025

Bonus points for guessing what this rubber pad is that broke off, went down the barrel to this E&L AK74 and jammed that many BB’s in the chamber and barrel!!

And because I keep forgetting to post my builds… the E&L AK-74M (with 7.62mm magazines to annoy the purists)
24/09/2025

And because I keep forgetting to post my builds… the E&L AK-74M (with 7.62mm magazines to annoy the purists)

Got a nice E&L AK-74M build going on. Always enjoyed the end creation of these AK’s.
16/09/2025

Got a nice E&L AK-74M build going on. Always enjoyed the end creation of these AK’s.

Back at it! I am still working on these toys of ours - I just keep forgetting to take pictures and post them on my page...
28/07/2025

Back at it! I am still working on these toys of ours - I just keep forgetting to take pictures and post them on my page…

And all done! These gearboxes are a little nightmare!
03/07/2025

And all done! These gearboxes are a little nightmare!

Bonus points for today’s build!
03/07/2025

Bonus points for today’s build!

Whilst it’s been a long while since I last posted, I still am accepting work, just not as much as I used to in the heyda...
20/03/2025

Whilst it’s been a long while since I last posted, I still am accepting work, just not as much as I used to in the heyday!

A blast from the past, a TM G3SD needing some much required TLC.

From less than 0.5j to 1.1j on 0.28g lobbing those BB’s a decent range on perfect compression.

20/09/2024

Is your LCT screechy no matter how you shim it? Gears tight in the bearings? No more! Buttery smooth shimming and spinning! Removed all screeching and no longer sounds like it’s going to p**p itself

Repairing some old motors! Finally putting to good use the 30+ broken motors I have stored away in a box over the past ...
15/09/2024

Repairing some old motors! Finally putting to good use the 30+ broken motors I have stored away in a box over the past few years

Been a very busy few days with more gun builds and repairing the turbo on the car along with new electronics on the Triu...
13/09/2024

Been a very busy few days with more gun builds and repairing the turbo on the car along with new electronics on the Triumph Explorer!

I’ve got some space for more builds so keep them coming!

The things I go through for near perfection…
08/09/2024

The things I go through for near perfection…

Been meaning to do this for ages but after putting it off for a couple of years due to other commitments, I finally took...
22/01/2024

Been meaning to do this for ages but after putting it off for a couple of years due to other commitments, I finally took the time today to weather the RPK!

The original finish is very orange and glossy and I like it - but I love the old tattered look more (just like me!)

Featuring a lot of sanding, teak oil and a few other fun arts and crafts, I have to present the weathered RPK!
It’s a little bit darker than I’d prefer as I went a bit mad with the black acrylic paint pen; however, I’m in love with the new look.

Address

Dover
CT155JP

Website

Alerts

Be the first to know and let us send you an email when James Minns Airsoft Tech posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category