TType Lambretta

13/07/2021

New part as used on ttype motors

https://m.facebook.com/story.php?story_fbid=4112918118829609&id=100003343842722

09/05/2021

Got a batch of 100 of my early cast type version choke kits made up again
Drop me a message if u want one
Thanks..

10/04/2021

Another review cheers Jason..

10/04/2021

Another review thanks Mark

https://m.facebook.com/story.php?story_fbid=3841796872608403&id=100003343842722

22/01/2021

26/12/2020

https://www.facebook.com/270128819767924/posts/3507661466014627/

Light duties only on xmas eve just bagging these up that we use on the Ttype265 motor builds

New shim kits for lambretta gear swivel fitment

In stainless so wont rust
Provide reduced friction and more direct action as when there shimmed well it holds the swivel square on the post converting the cable pull into a more precise movement

set of 4 shims at diff size combo
Pic shows std swivel with 2 small shims added and the jpp type with the o rings removed and 3 shims added.
Each type can require diff sizes

21/12/2020

https://www.facebook.com/270128819767924/posts/3501164569997650/

Just had these come in for our builds
Was fed up of seeing rusty marks down side of lambretta chaincase with the std shims
Was also having to use up to 3 of the 1mm ones we bought in so had these done in stainless steel providing options of 0.5mm 1mm 1.5mm 2mm 2.5mm 3mm and 3.5mm
A new remade chaincase and sil shaft is approx 2mm but each combo of shaft and chaincase is different

I've bought in large qty so can offer them as kits only as too costly in time to be sending them out as singles and it gives u each option to get the job done first time
So 4 shims 1 circlip and 1 oil seal 6 items for
£15