Harbour Customs

Harbour Customs Let us help you make your sled yours !

Vinyl wraps, bumpers, bracing, clutching, suspension, controls, venting, maintenance - from functional mods to savage looks and everything in between, we'll get you sorted !

Swinging into spring, but still a scattered project on the move.Here's a set of UFO Plastics with a fresh wrap from SKD...
05/12/2026

Swinging into spring, but still a scattered project on the move.

Here's a set of UFO Plastics with a fresh wrap from SKDA Moto Creative

Warning: SXS Content !The new Can Am HD11 Defender is pretty dandy, but I found the clutching was pretty poor out of the...
03/28/2026

Warning: SXS Content !

The new Can Am HD11 Defender is pretty dandy, but I found the clutching was pretty poor out of the box - the 2200 RPM engagement creates a lot of lag when starting off in both forward and reverse.

The RVS Performance / QSC Clutching -QuadShop Customs clutch kit has a ton of adjustment, from all out performance, larger tires, or reduction of the lag.

With the trail weighting for factory 30's, I lowered the engagement to around 1650 RPM to pretty well eliminate all of the throttle lag, and better throttle response throughout the range.

I'll be doing installs on these, so if you're interested, reach out !

At something a bit different, and a bit the same, to wake the Defender up !RVS Performance QSC Clutching -QuadShop Cust...
03/27/2026

At something a bit different, and a bit the same, to wake the Defender up !

RVS Performance QSC Clutching -QuadShop Customs

Drop of snow on the go bys ?I'm taking a break myself and heading west for the week for some throttle time instead of wr...
02/24/2026

Drop of snow on the go bys ?

I'm taking a break myself and heading west for the week for some throttle time instead of wrench time. After that it'll be late March before I'm back in action.

Feel free to reach out if you'd like to have anything looked at then, or if your rollers don't make it until then 🤣

Enjoy it !

The Freeride is nice and all, but there's something pretty dandy about breaking the old iron out.Just wants an extra can...
02/13/2026

The Freeride is nice and all, but there's something pretty dandy about breaking the old iron out.

Just wants an extra can of fuel, and a spare back for yourself.

Happy Friday bys !

Some Friday Maintenance ! This Summit X dropped back for a pre season check and a pDrive maintenance to keep everything ...
01/16/2026

Some Friday Maintenance !

This Summit X dropped back for a pre season check and a pDrive maintenance to keep everything rolling when it hits the snow again !

I was always more partial to the red thrust washer on the pDrive - made it easier to see how dirty the rollers were getting.

Hope you're out of the rain this Friday, and it all turns off to snow !

The skipper needs maintenance too !This new-to-fadder Renegade XRS got some love before the rain - a PreSeason maintenan...
01/14/2026

The skipper needs maintenance too !

This new-to-fadder Renegade XRS got some love before the rain - a PreSeason maintenance and of course some Hi-Torque rollers (One was cracked when we pulled them !)

A clean of the clutch bay goes a long way to keep them happy.

Kitted out with Cheetah Factory Racing and Munster Canada !This '25 Freeride has a whole new cockpit, featuring:- CFR 2....
01/13/2026

Kitted out with Cheetah Factory Racing and Munster Canada !

This '25 Freeride has a whole new cockpit, featuring:

- CFR 2.5" Gen2 Riser
- CFR Misfit Bars, 0.5" rise
- CFR Grips
- CFR E-Stop/Shot Relocate
- Munster Finger Throttle & Guard

This is a much lower setup than factory to allow you to align the riser with the steering post, and get your weight further forward on the sled, giving better control and response when in the tangly stuff.

Some bling coming for the skid tomorrow - stay tuned !

Time for a Cheetah Factory Racing cockpit !
01/13/2026

Time for a Cheetah Factory Racing cockpit !

The season might be underway, but it's never too late to get a checkover done !These 2 dropped by for a pDrive Primary c...
01/11/2026

The season might be underway, but it's never too late to get a checkover done !

These 2 dropped by for a pDrive Primary clutch maintenance, and a PreSeason checkover to make sure they're ready for the next lot of snow !

Address

Southern Shore Highway
Witless Bay, NL
A0A4K0

Telephone

+17096310918

Website

Alerts

Be the first to know and let us send you an email when Harbour Customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category