Kismet Competition

06/13/2026

Sometimes we interrupt our efforts to make things for friends.

05/17/2026

Fiberglass repair is well underway. And just to credit Rodrigo Herrera , every racecar must have some JB Weld.

05/05/2026

Going to great lengths to make sure valve train is optimized. No that's not Titanium

05/02/2026

A full day of car prep. I had to weld up the cylinder head and machine the deck. New valves arrived from Down under. Upon close inspection some of the valve seats in the head needed work. In between all of that, I managed to glue in some balsa wood reinforcements for the hood. That will be sandwiched in fiberglass to limit the stress cracking which has been a long time issue.

04/25/2026

Stripping 50 year old gelcoat ranks among the worst tasks required to get the Datsun back on track.

04/25/2026

This sim certainly got exercised this winter. This old man need the help to keep the cobwebs from forming.

02/21/2026

Revision of the old engine. We'll see what kind of power we can make.

06/28/2024

https://youtu.be/pVEAXAWezpU

Testing the Reynard FF87 at ICAR Mirabel. There was lots of traffic with Rallykarts, T-rex both 3 wheel and 4 wheel, legends and formula Fords. Hard to get c...

06/24/2024

No surprises in the gearbox. Testing this week at ICAR. We're still on the hunt for motivated partners who want to be part of our efforts at The Grand Prix of Trois Rivières. Lets Go!

06/20/2024

After struggling with repeated leaking from the oil pickup of the titan drysump pan, I had to try to fix the design. The original design which was purchased new, uses o-rings to seal the pan as well as a double row on the pickup tube. I managed to keep it sealed for 1-2 weekends max before it would weep. I thought to weld an AN fitting to the pan fitting but despite cleaning the anodizing, the part would not weld cleanly. I fabricated a -10 to a 3/4" NPT and tapped the pan tube. We'll keep you updated if this fixed the issue.