Palombo Industries

Palombo Industries We are precision AG Gps specialists ranging from entry level light bar solutions through to full farm RTK solutions.

We also now offer rural WiFi solutions to make the most of todays reporting systems from weather stations, weigh bridges or vehicles

Straight rows might be the most obvious result of good guidance.But they're not really the point.During planting, accura...
09/09/2026

Straight rows might be the most obvious result of good guidance.

But they're not really the point.

During planting, accuracy affects where every row starts, where the next pass runs and how consistently the machine follows the intended path across the paddock.

And those same rows are going to be followed again.

Spraying.
Fertilising.
Irrigation.
Picking.

Get the foundation right at planting and you're setting up more than one job.

You're setting up the season that follows.

Cotton planting is getting underway again across the region.And for all the technology that comes later in the season, p...
07/09/2026

Cotton planting is getting underway again across the region.

And for all the technology that comes later in the season, plenty is decided right here.

Where the seed goes.
How consistently it goes in.
How accurately every pass follows the last.

Good guidance and steering aren't just about making straight rows look good from the road.

They're about putting the crop where you intended from the very first pass.

Here's to another cotton season.

The latest crop forecasts are out, and northern NSW is looking at a tougher season than we've had over the last few year...
02/09/2026

The latest crop forecasts are out, and northern NSW is looking at a tougher season than we've had over the last few years.

That makes getting the most out of what's already in the paddock even more important.

Accurate guidance.
Section control.
Rate control.
Knowing exactly where your inputs are going.

None of that can make it rain.

But it can help make sure you're not unnecessarily doubling up on chemical or fertiliser, missing areas, or putting expensive inputs where they don't need to be.

In a bumper year, a bit of waste can be easier to overlook.

In a tighter season, every pass matters.

There's finally a bit more moisture in the profile across parts of northern NSW.After a difficult start to the winter cr...
31/08/2026

There's finally a bit more moisture in the profile across parts of northern NSW.

After a difficult start to the winter cropping season, the recent rain has given plenty of crops something to work with heading into spring.

Now comes the interesting part.

Watching how different areas of the paddock respond, keeping an eye on crop development and making the right decisions about what goes on - and where.

This is also where the information coming from your machinery starts becoming valuable.

Yield maps, application records and crop data aren't just something to look at after harvest. They can help build a better picture of what's happening across the paddock throughout the season.

The crop's growing. Now's the time to pay attention to what it's telling you.

Early forecasts are suggesting this year's winter crop might not be the bumper harvest we've become used to over the las...
28/08/2026

Early forecasts are suggesting this year's winter crop might not be the bumper harvest we've become used to over the last few seasons.

That makes getting the most out of what does come off even more important.

Harvest cart weighing and yield monitoring give you accurate information about what's coming off each paddock, how different areas have performed and what's actually going into each load.

Less estimating. Better records. More useful information to take into next season.

We might still be a little way off harvest, but now's a good time to make sure you'll be measuring what matters when it arrives.

Because if every tonne counts this year, it's worth knowing exactly where it came from.

Not every wet-day job needs a grease gun.If the weather keeps you out of the paddock for a while this week, it might be ...
26/08/2026

Not every wet-day job needs a grease gun.

If the weather keeps you out of the paddock for a while this week, it might be a good opportunity to give the technology in the cab a bit of attention too.

Software and firmware updates.
Old field data that needs sorting.
Settings you've been meaning to look at.
Operator questions you've been meaning to ask.

They're easy jobs to keep putting off when there's work to be done.

A wet day isn't a bad time to finally get around to them.

AgQuip's done for another year. Now it's back to it.There were plenty of good conversations last week about new systems,...
24/08/2026

AgQuip's done for another year. Now it's back to it.

There were plenty of good conversations last week about new systems, upgrades and little problems that have been annoying operators for longer than they'd like to admit.

Now's the time to do something about them.

If you had a chat with Bryce at AgQuip about something on your operation — or you've got a job you've been putting off — give us a call and we'll pick the conversation back up.

No need to start from scratch.

A big thanks to everyone who stopped by the Topcon stand and had a chat with us at AgQuip this week.It was great to catc...
21/08/2026

A big thanks to everyone who stopped by the Topcon stand and had a chat with us at AgQuip this week.

It was great to catch up with plenty of familiar faces, meet some new ones and have a few good conversations about what’s happening on farms across the region.

If you spoke with Bryce about a system, an upgrade, something you’re looking to improve or even just an idea you’ve been kicking around, don’t hesitate to get back in touch.

Sometimes those quick conversations at AgQuip are just the starting point.

Thanks again to everyone who came over and said hey - we hope you had a great few days at AgQuip.

AgQuip week is here!If you're heading over to Gunnedah this week, keep an eye out for Bryce from Palombo Industries, who...
17/08/2026

AgQuip week is here!

If you're heading over to Gunnedah this week, keep an eye out for Bryce from Palombo Industries, who'll be spending some time on the Topcon stand.

It's a good chance to have a look at what's happening in precision ag, check out some of the latest Topcon gear and, more importantly, have a chat about what might actually work on your operation.

Come over, say g'day and have a yarn with Bryce while you're there.

See you at AgQuip!

Recently we've been talking a lot about broadacre technology, but accurate weighing has a big place in hay and silage op...
31/07/2026

Recently we've been talking a lot about broadacre technology, but accurate weighing has a big place in hay and silage operations too.

Mobile weighing systems allow operators to weigh every load as they work, whether it's moving hay, loading silage or feeding out.

That means:
• Better inventory management.
• More accurate loading.
• Less guesswork when buying or selling hay.
• Better records across the season.

Like most technology, it's not about making the job more complicated.

It's about making everyday jobs a little more accurate and a lot easier.

Address

Lot 2 Boggabilla Road
Moree, NSW
2400

Opening Hours

Monday 9am - 6pm
Tuesday 7:30am - 6pm
Wednesday 7:30am - 6pm
Thursday 7:30am - 6pm
Friday 9am - 6pm

Telephone

+61400920104

Website

Alerts

Be the first to know and let us send you an email when Palombo Industries posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share