Surfboard Shapers Workshop

Home
Australia
Gold Coast, QLD
Surfboard Shapers Workshop

Learn about the tools, blanks, how to make templates and the techniques of shaping with a hands on,

26/10/2024

Back in town now after 3 weeks away, with the dreaded airplane flu. But here are a few pics of the trip starting with Milan then Como.

18/09/2024

Helter Skelter. Paul McCartney concert Gold Coast. According to the dictionary a tall spiral slide winding around a tower or haste and confusion. Watch it full screen. Volume up.

30/08/2024

With a bit of interest in restored surfboards, here is one I did a while ago. Originally I thought it was too far gone with the bottom full of brown stress lines, but the owner said no hurry. So, when I had a coupe of weeks spare it was skin off, repaired back to original shape, glassed, new fin made and air brushed, glossed and polished. Now in the hands of a very stoked owner.

26/08/2024

Nothing clears the mind like surf and a good head rinse. This one at Burleigh Heads. Had a similar one only bigger, about 10' at Winkypop in the early 70's, pushed me straight through the middle of my board. Found the two piece way down the reef. Photos by Dick Hoole

18/08/2024

Want to shape your own surfboard? Learn in a One on One experience from a shaper with over 55 years of shaping experience in all types of surfboards. It will change your life. Booking essential. Check https://harveysurf.com/surfboard-shapers-workshop/ for more details.

05/08/2024

Got a couple of tables and chairs for sale on marketplace. Nice teak dining table and 4 cane high backed chairs. Also outdoor patio table 4 chairs and cushions. Check market place for details. Thanks Harvs

18/07/2024

Had this art idea in the back of my mind for a while. Finally got it down. "Bali Batik Barrel" 3' x 2' on board. Soon to be framed.

06/07/2024

Next step (one of a few hundred) was cutting the rocker template for the balsa board. The weight of one stringer before chambering was 650gms, then after cutting, 360gms, nearly half it's original weight. Next to trim some logs. In between this and doing Surfboard Shapers Workshops, I've shaped and delivered a trophy board for the Pro-Am at Burleigh Golf Club. Busy, busy.

22/06/2024

Just around the corner from where I'm shaping at Burleigh Board Makers, I found a small timber furniture factory when I was chasing some cedar for a small trophy project. I was talking to Mal who owns Designs in Timber when I noticed, stacked high up near the roof, some long logs that looked like balsa. After some negotiation, I drove away with five 3 meter logs. So I now have a big project in front of me. Probably take me a few months of trimming, adding rocker, cutting in the chambers and so on. So this is the first post and I'll drop another post in every now and then when I have something to show. Ive done a graphic of what I have planned to help me visualize the end result. Balsa with 7 cedar stringers, 9'6 x 22 1/2" x 3 1/4" Pintail with flyers, and cedar/balsa tail block, timber glass on single fin. Let the journey begin.

25/05/2024

Uber - Mentawai style. Days of uncrowded and empty surf breaks if you know who to go with. Got some fish too. Now back in the shaping bay if you need a new handcrafted shooter or want to shape your own. www.harveysurf.com or www.surfboardshapersworkshop.com

01/04/2024

Finished off and delivered an EPS timber sprayed deck longboard then headed up to the Sunshine Coast for the 50th Pa and Ma Bendall Memorial. 50 years since I won the inaugural comp and great to catch up with a lot of friends. One of them was showing me a board that he owned and I thought I recognized it from a photo I had in '72. The group photo, third from left was a resin pour bottom originally owned by Kim Hancock (Hancock Guitars). 52 years old and still in great surfable condition. The young blond haired grommet front right with the dark sweatshirt also had his name on that beautiful piece of hardware. Tony Eltherington 1978 along with a few names you might recognize. Handed over my 1970 embroidered WindanSea badge for the new club house. Old surfing buddie from the 60's in Sydney. Thanks for the great weekend away, felt a whole lot better after the car incident. Ah, the ups and downs of life.

24/03/2024

Was looking at fins and saw this ad. Just another step into insanity.

Address

Unit 3/10 Pacific Avenue Miami
Gold Coast, QLD
4220

Telephone

0414 557624

Website

http://www.surfboardshapersworkshop.com.au/

Alerts

Be the first to know and let us send you an email when Surfboard Shapers Workshop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Surfboard Shapers Workshop:

Shortcuts

Want your business to be the top-listed Gym/sports Facility in Gold Coast?